topgun

Tom, you also have a PM

good stuff. Need a copy of solidworks Preston?? Oh and does Sam still have your hard drives??

Tom, isntall it normally with CD one through however many you have to use. When it is all installed (do NOT register it, the serial number is in a .txt file on the Patch CD) you open up the patch program on the patch CD and patch to the file it says to, and then its a full working copy.

I remember buying a bigass Pizza (Its like a 20-21" pizza) with a 20 last night, and I know it was more than 10 bucks, I think it was like 11.99 or something. Now explain to me how I have 15$ back in change this morning from that....

PS: Drinking in celebration of nailing an Engineerin Physics Test.

Was at a friends B-day party, got drunk, rand with a hot ass vemal friend form the cops. They were being total bitchs (the cops). Then an other friend ran across a pool tarp (ya know how they drain pools in the winter and put a trap over them, yea, he ran on top of that). Then wentn to a freinds house, she got all emototinal on us, and I hav e no idea how to comfort an emotional woman, so I basically said f' that and finished my beer and left. I'm drunk... Thatsa all there is to it. Wow.

Working on cracking my Razr... hopefully I don't make it a brick.

That sounds like one crazy ass bitch Tom, what did you even do? On a better note, just got out of my physics test, and I knew how to do all of the hard problems that you actually had to work out!!

Friend that I went to HS with just stopped by, he drives an '03 5spd GT, he just got a pair of Nitto DR's and in his trunk he had a Procharger setup with a 2core intercooler for his GT... Now all he needs is new injectors, fuel pump, etc, etc. I can't wait till that thing gets put on, its gonna be badass. I can't wait till he lets me drive it with the procharger on ...

I had a flatcone once... it flatlined on me.

But for what ended up being 44.26$ I think I did pretty well.

Picked up my USA-300, Epicenter, and Three.1 today. They are kinda beatup but eh, I hope they work. Don't really have a way of trying them out right now since I have no car setup. I didn't realize the USA-300 was a full chrome finish, it is a little beat up but I think will look halfway decent with some elbow grease and some polish and Some of the scuffs and nics will come out (I hope). The board looks alright on it, just don't have a way of testing it. Might have to bring it into the lab and hook it up to a powersupply to see if she even turns on.

I'm not trying to knock on you here man, but that box is ugly. If you got the finish better it wouldn't be so bad, but its pretty blotchy and if people were paying me for a product I wouldn't allow that outa my door. But thats just my .02$

When I get the money to buy one, is it still possible to get it signed?

Way to go on the house Ryan! On a good note for me, it appears I now own an Epicenter, Audiocontrol Three.1, and a US Amps USA-300, all for 37.50. Now I hope they all work...

I've never met Todd, but I work with his dad everyday and get to hear the stores.

Yes, I used the software on my computer some when my equipment was on the same side as the room, can't tell you much about it because I didn't use it that much before I moved my equipment and I don't feel like trying to find a 15ft cable for it.

I'm not to much of a fan of Behringer amps now that I have QSC and seen the light... But I do love my DCX2496 and its a pretty decent unit, does a hella lot of stuff for the price. I may be wrong but I think jlaine over on CS.o had a DCX2496 and a DEQ2496 in his car...

You might try steam bending.... I've seen a 2" thick piece of oak bent in a semicircle with an 18" radius bent using just steam. Don't think that steam bending would work with MDF though, probably have to use birch ply.

Pretty Snazzy, I like it. Is there a difference to the meter for the kerf cuts and flared ports vs standand design and 45's? I know in theory (atleast to me) it would make a difference but I was wondering if you've noticed anything other than the fact it just looks good.

Don't quote me at that, but I believe it can. I haven't entirely figured all of it out yet, haven't had the time really.

You couldn't have waited like a week or two could you.... Ain't gots no moneys now...

If your running the DCX2496 unit its pretty easy, just plug it into the EQ and be done with it.

http://www.soundsolutionsaudio.com/forum/i...?showtopic=7378 Input Appreciated!!!!

Ok, so as stated in the title these are my thoughts and OPINIONS on using a plate amp to power a subwoofer setup in a house and going active in a home environment. This was wrote in a short time period late a night so deal with any rambling that I did and please correct me where you see fit. I would like ya'lls opinion on this article and what needs to be changed, etc, etc. KEEP IN MIND THESE ARE ALL MY OPINIONS, NOT FACT. Thinking of using a big badass rack amp to drive your subs in your house? Thinking of going active in your home setup? If so, you may want to read this