Everything posted by Soapbox
-
If you are waiting on anything.
I was wondering thx for the notice. I sent e-mail from work with a .gov don't worry it's dot.gov not irs.gov
-
Hdf or Mdf??
Density is a measure of porosity. Weight is a measure of specific gravity. If someone would send me a 8 x 16 piece of HDF I can measure the difference between the 2 types by nuclear gauge relative to the moisture content of the product. A nomograph can be made for the following 3 values to determine density based on thickness, area, and humidity.
-
Sundown SA-8 Pre-Sale
Whoopie the other 2 arrived today!
-
Sundown SA-8 Pre-Sale
Final port size is 7 3/4 x 8 1/2. The line is approx 7ft . First impression of the box to me is like a band pass seems really good on the low notes but has a cutoff around above 50-60. As Jacob has said they are stiff and need to be broke in. I only put approx 400 to the pair. I did have a couple of install issues. I had to re route my cutout to it to drop in and then I had to notch where the terminals were. I'll post up some photos of the gaskets so everyone can make sure their cutouts are right. One thing they are not is Loose and Sloppy! I'm building yet another box tomorrow 1.5 cubes kerf ported tuned to 35. Note I was using my zune directly to the amp which isn't the best source. For the finished install I have an saz 1500 and will be running an audio control lc6i which should give me 6 volt input.
-
Sundown SA-8 Pre-Sale
Easy it's my first video on the bench 3 battery lanzar opti 800 @ 2 ohm approximately 400 watts between the 2
-
Sundown SA-8 Pre-Sale
poop only 2 of the 4 showed up. pictures to follow.
-
Sundown SA-8 Pre-Sale
He fell asleep trying.
-
Sundown SA-8 Pre-Sale
Them truckers must be speeding. I just gained the day back.
-
Sundown SA-8 Pre-Sale
I lost a day in transit already. Originally the tracker, said expect them on Friday, but the last up date says Saturday. I am ready, well the boxs are and I suppose I can Okie it into the van since the Honda is still in the shop since the wife ran it into a BUSS!!! Dummy. However the car may be finished by Friday. One way I did come out on top is I got the body shop to run the alt to battery wire for free since they had to take apart the whole front end.
-
Sundown SA-8 Pre-Sale
Yea I got a tracking number. I think he is going from date of order though not sure. I preordered in November.
-
Sundown SA-8 Pre-Sale
Whoopie I got mine in the mail too.
-
Sundown SA-8 Pre-Sale
Shipping alphabetically works for me. JK
-
Box Design for 8" L5 Ported. Please Help!
Area = length * width * depth Here is a Volume Calculator
-
Sundown SA-8 Pre-Sale
actually yours is more geared for output... that is more than recommended port area. not sq oriented. Noit quite right it's a horn. The line is around 7 ft long.
-
Sundown SA-8 Pre-Sale
Betcha mine sounds Great. 4 total cubes and the port opening is 65" sq. This is for 2 8's on a saz 1500 @ 2 ohms.
-
Sundown SA-8 Pre-Sale
Ouch the wife crashed the car into a buss. It's in the body shop for a week. Stoked for these to arrive. I suppose this will give me some time to break them in on low power. Christmas in march maybe.
-
Team introductions for IAK
LMFAO ROFL Nah whats got me bustin is this thread has more replies than any other in this team section. Buy the way I finished my Horn box today. Had to chase the 3 yr old today he had a sharpie and was drawin tattoos all over himself. Funniest thing is he was stickin it down the crack of his pants and now he looks like he has a tramp stamp!
-
From: Sundown SA-8 Pre-Sale
This guy is about as Stealthy as a stinky fart. err a Shart. Dude you reek like poopoo. Back on topic I hope the Somilies didn't hijhack the boat like stealth did this thread.
-
what screws
One's that are not stripped.
-
Sundown SA-8 Pre-Sale
boy this wait is killing me
-
Official Team introduction for IAK members.
I know there more than 3.
-
US amp MD3D
Thank you for the information I will still be looking to find more... It's real slow on this section of the forum. Even then not very informative. I ran in to the same thing. Keep asking around I finaly got some decent info from Alton.
-
Thanks to all Sundown customers !
The feeling is mutual thanks Soapbox
-
us amps HC50
If you have the white paper from the website and that is not enough info what are you looking to find out? I'm in the design mode and am collecting info prior to purchasing front stage. Just how much are these underrated? And what is the recommended ohm load. I don't want to have an experience like mentioned above of the amp melting into the carpet. Furthermore, I have a chance to get an optimizer and all I have is the manufactures info on it and no real world experience. Navigating the sea of options makes me sea sick sometimes. I need a life line.
-
Team introductions for IAK
I'm still a speed freak too I regularly bust 150 mph too. And I'm not old I'm just bald!