Soapbox

Issues with the Paint shop. This doesn't look right does it. All of the sharpie was flaws in the paint and body work I demanded to get repaired! Furthermore if you notice the radiator is leaking..... These were taken after the shop had the car for 6 weeks. I called today and they fessed up about the radiator and ordered a new one. Delayed yet another day. I'm have to finish the build on friday for a comp on Saturday

Where is my cd?

I would realy like some sort of time frame too. 3 mths? 6mths 1year?

For a real competitor then i wouldnt tell him how much to run cause he would already know, this thread wouldnt even been made. No disrespect to the OP. All competitors begin at some level it's just the determination to win that separates them. A simple yes or now would have sufficed. Even moderately educated competitors need confirmation to calm their worries. I believe if some one would have posted a graph of the response of the N3's the op would have learned more. It isn't the ability of the N3's to accept your planned power. The fact is the response is REAL high you will be missing ALOT of Lower response. It will be some what hard to get this sub to play below 40hz but only time will tell there isn't enough people with real world application running this sub. For me I am leaning real hard towards this sub since I will be running 10k and my crx peaks at 50-60 depending on several factors which is the sweet spot for this sub. Biggest thing distancing my purchase is I still want to Bass race and do demos.

Just watch out the sticker contains all of the magical db property. If you loose it your screwed you'll most likely be down 3 db on the termlab.

My team mate runs 2500 clamped to each of his Bl's and has had NO problems!

Nick can you please confirm enclosure recommendations for the new N2's and N3's. There is no notes in the pinned topics above concerning the new drivers.

Jacob can you elaborate on the Nightshade vr 2. I'm not familiar with it's specs or performance. For my application it will be 1 or 2 subs on 9k rms for bass-race in my crx.

With 7 of ten teammates all doin over 150 it was buggin me to only be at 144. With that said we have one @155, a 154, a 153. To top that off 2 other teammates bought warhorses. What was I suppose two do? I ended up getting a dc9k

Uhmm I know I posted a couple of different choices on an amp butt.. it's none of them. Order was placed today Let's see. What amp is able to put out 6k at less than 10 volts on a single battery in a street a setup?

I have bolts that run through the body holding the 2x4's down. When I get the car back I'll take a better shot it came out good. Should be out of the paint shop tomarrow or the next day.

It's a secret at least until march 5! The actual numbers are better than posted and we're building another box currently.

I want one Porkchop could you please handle sending it to me via mail.

Where is Steve Mead doesnt' he also have a crx.

I normally post on SMD because it's heavily stacked with California competitors. Only a few are aware of this build dummys. Shizzon in your experience or knowledge bass how do the guys in S1 get away with running saz 1500's? Pm with the answer if you would I wouldn't want everyone to know the answer to this one.

were having a spring BBQ - testing session one week prior to our 1st hosted comp come on out and knaw on a bone.

Chop hook me up with a sorce for the logs. Team Flex Issues needs somework done on it's visual image.. now audio image that's another story it's funny how fast hates pop up

I ran a dedicated ground to the center console metal.

New door handles, locks, weather stripping, headlights.

It's got to get ugly before it gets pretty.

I'm always on the look out for crx builds looks great. Here is a peak at mine Bone white Rex I would appreciate any box plans you have collected. Yours as a ground pounder looks sweet for mine watch out for a full on spl beast. I will be ordering a custom case machined 270 amp alt within the next 4 weeks if you hold off you could piggy back and purchase when I order mine. The custom case will be for an ac replacement. 270 amp... if your interested shoot me a pm and I'll keep you posted oh and it will be a mechman external regulator capable of up to 18volts.

don't hesitate to ask.

Berto if you want to help before the comp you'll have to come by.

Berto what are you doing hanging out here?

Fuse holders have a WIDE range of quality. That said I have used just about every style but have a new favorite The highest quality incorporating the use of 4 fuses with 2 zero in and 2 zero out.