fearlessgangsta

Ok I will try to make a trip to my sisters house.

I can't really drive around for 1-2hrs Shizz.

Is it not supposed to happen when the volume is low? What's a long time? and I don't have anymore RCA's

Music is alternating current. He'll need to set it to AC, not DC. Just use 1 RCA? correct/ Do I need a test tone disk because all I have is music.

The subs are like this. The 2 positives and 2 negatives that are left each have there own terminal. The two negatives are tied together at the amp and the two positives are tied together at the amp making a one Ohm load. If you saw the and how they wired it I thought it was wrong. I wired it like this Checked with a DMM it is 1Ohm

That's what I'm thinking I mean it is a first Run. Any body know a cheap amp I could maybe try and take back? Or anyone nearby want to mess around with it?

Music is alternating current. He'll need to set it to AC, not DC. Just use 1 RCA?

Just use one RCA?

I told him make it public just now so he texted me back saying he did.

The vid my answer the 2 vol question as I believe it did protect at vol 2 or 4 that day. I'll go unplug and see what happens.

I'll post a pic of how it's wired now. And in the vid you can see how they wired it. Vid is private on a friends YouTube

Stock with a PAC check your input voltage ..... on the RCAs.. if its over 6 volts i dont think that amp will take it. How do I check it? I saw on a Rockford vid that my factory HU clips at 8 something volts, but they were installing a 3.sixty

Also to add at first I thought it was the remote wire. So I ran a wire straight from the batt to a switch to the remote on the amp.

Stock with a PAC

Maybe when my voltage goes to 15.3 or so it thinks I'm trying to run 16volt then when it goes down to 14.7 or so it thinks it's to much voltage drop? I don't know just taking a shot in the dark here.

I don't see any wire touching. I'm feed up with this as I'm sick already then this happened. I didn't sleep at all last night. I just can't figure it out.

Ok, I bought a 2k last June-July and started buying the other stuff for my install. So long story short I got everything installed Monday. At first my amp was fine it protected one time the first day I had it, but I thought that was because I hit a big bump on the freeway. Tuesday I was heading back to the shop that did my install for them to finish my big 3 or 5 actually. So as I went to leave my amp protects. I restart the truck and start beating on it again and 30-40 sec later it protects. I call Navid and he says it might be my Bass Knob so I unplug it and beat on it with the car off and it plays fine. I played it for a min or two fine. Then I go for a drive with the bass knob unhooked it protects more than once. I made a vid for Navid to look at. So the day after that I start to think it was the way the amp my be wired. The shop used both of the positives and both of the negative inputs. I rewired it with both negatives in the far left negative and both positives in the far right positive. I ran it like that yesterday and earlier today and it was fine (but both times I remote started my car so the voltage had already went down to 14.9). Then I went to go to the bank. I start the truck voltage at 15.1 I pull out the garage and start beating on it. My voltage slowly rises to 15.3-15.4 as my truck is PCM controlled and when it is cold it starts at 15.1 and goes up to 15.4 and slowly comes down to 14.4 or so. So as I was saying I beat on it for 30 seconds get to the stop sign to turn out my naborhood and no bass my votage is 15.4. I pull into CVS and restart the car and let it ideal for a bit and my votage goes down to 14.7-14.9 ok good. I start beating on it fine all the way to the bank. Leave the bank and I had a thought (" what if the amp cuts off from my votage") So I restart the car and my voltage goes to 15.1 and goes up to 15.3 and I start beating on system not 30 secs later amp cuts off and voltage says 15.4. So idk what the problem is. The shop doesn't know what the problem is and I don't have another amp I could drop in. HELP PLZ

White Clouds is one of my favorite demo songs. People are never ready for that first note.

I believe around the same time the new baskets come out so like Jon said around summer or later.

I tried sketchup and got fed up real quick. Nice job, and congrats on having the well-power to put up with it. I know it wasn't all smooth sailing.

My 2k is doing work besides a problem I can't figure out that Navid is helping out with, but I have a new airbag warning like on my dash. I think it's from my steering wheel and my dash going crazy when I turn it up. Now I need some PWX's Also Navid your the man. Along with Mark and Aaron. Jon to. Lol

My amp is acting weird and it might be a problem with my Bass Knob, but Navid was ready to handle it.

That Zed looks beast. And those Caps OMG

^ Win But, have you looked into the Dcons, Incriminator I's, Skar IVX's, or Sundown E's? All rated at 300w and at 200w a piece should sound nice.