Tosh Henderson

yes this helps, think i got it. just clear this up for me i can have 2 14v alts that run through my wires i have now correct? i have 270a mechman with 0 gauge wire and the big three . so if i add another ho alt i can connect it to the same points the other is connected with additional wire, or run straight to rear batt bank right? sorry if im sounding confused. thnx

When you build a set up that gets beyond just ho alt and batts and you step up to dual,triple etc alternator how is it wired? Do you run the output from second alt to secondary batts? or does it feed into the system another way? Where do you run the ground? Just wanting to know the general outline of this type of install. Yes I used the search function but no complete answer/understanding.

I did the flush mount, which helps with the flex anyways.. plus I got bracing in the middle so it will help even more. But yes I can PM you with the cut out sheet. As long as you write COPYRIGHT by BaMF101 on the inside of the box :P lmao jk cool!!. I'll put anything inside box since the info is free. But thnx in advance for the help.

You didn't want to do double baffle on that box,or those Q's don't need it? Also can you send me the box design or cut sheet?

Yup! Its 12.5 cu ft. @33 hz, with about 12 sq inches of port per cube... and yes they are for the Qs That's incredible!! Plz post pics when done. Also if there anyway to get the detail plans for it? Was looking to upgrade my truck to dual 15's but if you have the plan for 18's I'm going there

Does that box allow you to keep your back seats? How many cubes and what's it tuned to? Are you putting those Fi Q's in from your Sig?

Andrew have designed or built anything for under rear seat of 2007-2010 Ford f150 supercrew?

What amp are you going to power it with?

what year is your truck? Have you installed the Ho alternator yet?

What's my rms on a 18" btl n2 with all options except spl and universal?

Ok thnx. Didn't see it on the ssa site,didn't think about the store

how much does an xcon 12" weigh? and 15"?

The same reason we put tons of cash and weight in sub/boxes into the back of our vehicles. We like it!

Have them both,sounds good.smooth tweeters. Just recently bridged the amp to them sounds better,I just have to be careful on the gains

no its just sitting in factory tray. maybe i should look into adding one

yes thats customer serv. as far as testing and holding charge it had set for close to two day when i tested it ,showed 12.8. and the side thats has slight buldge is only 2 inches from radiator ,so i think that could be the problem. my mechman alt tested out at 14.1 -14.4. I will try to get a pic later today with battery out of truck,again thnx for the reply nat

I've had a d3400 under my hood since feb. It put out great power no problems. Today while working on my truck I noticed one side has a slight bulge. The batt still works fine,just need to know if I should be concerned?

big3 ,mechman 270alt,xs d3400 underhood,all 0 gauge wire,d3100 waiting to go in the back.Think im going to order a vcm also.

Im upgrading from 2 12's on 1300wts tuned to 32hz to 2 15's xcons on 3500wts tuned to 30hz. Of course the xcons will be loader and sound great,but i've never ran subs in a box tuned that low.am I going to notice a diff in the upper range? My front comps play pretty well down low have them crossed hfp at 63hz.Just want to know what to expect.I play a lot of rap,and r/b some rock.

You do great work. I'm jealous. Thanks Idiot? lol My website is launching in a couple days too so you can can check out all of my plexi windows, kerfs and everything and of course order from there too. What's the web address going to be?

ok thnx

I was on the ssa store page and clicked onto lethal injections and i says no product available.Is this just temporary because its out of stock or are you guys doing somthing new with the line?

37"w x 19"h x 31"d

I have 2 12" li 's on 1200wts now 4cubes 32hz tune. want to do more. if i stay with IA the choices are replace my li"s with 2 death rows and double my power to about 2300wts. or double my power and add 2 more lethals. my goal is to keep the clarity i have and get louder. any ideas on these choices?