boburk20

Im not too knowledgeable about fuses but the car audio place took a look at it and said it was a 100amp fuse, so from 100 to 250 amperage

I recently hooked up 2 Fi BL 10's to a pdx 1.1000 connected to the battery by 4 gauge wire. Within ten minutes of playing i had blown the fuse coming from the battery to the amp. I was wondering if attempting to run this setup off 4 gauge wiring is hindering the ability of the system and if it would be beneficial to up the wire to a 0 gauge. Thanks in advance for the help The fuse was a 10GA stinger fuse, switched to a 25A raptor ANL fuse & holder after burning the fuse. I switched because the stinger fuses were too spendy.

Mean Green Gear Reduction Starters and Altenators - Mean Green is the manufacturer of Gear Reduction Starters, Altenators bought one and never looked back.

Hypothetically speaking, what could i expect out of 2 BL 10's on a pdx 1.1000 in a dual ported prefab box? Your opinions are appreciated

Thanks a lot for your help guys. Are there boxes you recommend? Ive only seen videos of a single BL 10 or 12 so i can't really comment on their performance compared to my current set up. Is 2 necessary when trying to top my current situation?

My current system consists of 2 JL10w3's which I have had for a few years. They have always exceeded my expectations and impressed my not-so-caraudio-savy friends. I have done my research and set my sites on Fi BL 10's. I am wondering if my dual ported JL 10'' box and pdx 1.1000 will be enough to get a great performance out of 2 BL 10's. I'm not looking for maximum power, I am just trying to impliment new subs into my existing setup w/o the need to purchase a new box and amp. Thanks a lot in advance for your help. box: http://boxshoponline.com/zencart/images/3615.jpg

Video is spot on. No im not British

Im glad to be apart of the SSA forum.

I found this site through researching Fi brand subs. eventually it lead me here and i am happy about this described string of occurances. Greetings to all