Everything posted by Argent Audio
-
Quote for 2 Sundown SA-12's Ported
Ok here we go: 20 deep 18 tall 34.25 wide 3.5 @ 27 Hz Slot Port Flush Mount Subs up, port back on driver side $152 plus shipping This price includes carpet of your choice. I have black and salt and peper right now. I can also get gray. Andrew
-
Vented box for 10"FI Q
Ok I have been thinking long and hard about this box and what is going to be the best way to achieve all your goals. Since we are doing sub up, port back the aero port would have to be mounted in the plexi window. Instead I'm just going to make the plexi window a bit smaller which is going to save you money and I think it will look better in the end anyway. Here is what I have: 17.25 deep 11.25 tall 20.25 wide Flush mount (1) 3 inch aero port 33Hz tuning Window size: 7 tall x 8.25 wide. This design and window size is going to look a lot cleaner and I'm going to secure the window in the box a new method which should help in over all strength and look really bad ass!! Andrew
-
For people waiting for quotes. (Pics of new location!!!
Sheet rocking done! Got the purple high-impact sheet rock for the same price as regular!! Going to need some new doors, and believe me these things are expensive!!! Andrew
-
Quote for 2 Sundown SA-12's Ported
Here is what I came up with: 20 deep 18 tall 33.5 wide 3.5 cubes 28 Hz Flush mount. If you would like me to drop it down to 27 Hz tuning the box will just become wider. Andrew
-
Ported Enclosure for 12" AA Havoc
I can cut it down to about 15 and make it a bit deeper. Andrew
-
Quote for 2 Sundown SA-12's Ported
I would suggest the lowest tuning to be 28 Hz as anything lower is not really practical for car audio. Is 28 ok for you? Andrew
-
Ported Enclosure for 12" AA Havoc
Here is what I have: 2.25 @ 33 Hz 17 deep 17 tall 28.75 wide Andrew
-
Custom box for 2007 altima
Once again stefanhinote is correct Sealing the box off to the cabin is going to take some custom panels/expanding foam which could take some time and patience. It is up to you if you want to undertake that type of build. For starters I would suggest just a normal slot ported box with the sub and port facing the rear of the trunk. Andrew
-
For people waiting for quotes. (Pics of new location!!!
Been catching up on emails and paper work. Argent Audio is no longer a partnership so it's just me now doing all the work. Andrew
-
For people waiting for quotes. (Pics of new location!!!
Time line till move in: March 17th-18th - Finishing the Wall March 19th-21st - Tape/Sand Sheetrock/Fix Holes March 22nd-24th - Paint March 25th-27th - Move March 28th - OPEN FOR BUSINESS!!! Andrew
-
For people waiting for quotes. (Pics of new location!!!
Rest of the airline gone. Framing the wall. Sheet rock next. Andrew
-
Custom box for 2007 altima
stefanhinote is correct. A regular ported box is going to give you the best sound and output without cutting up your rear deck. Andrew
-
Quote for BL 15"
Hello, Sorry the the delay in the response, we have moved locations and restructured a bit. Are you still interested in an enclosure? Andrew
-
Box Quote
Hello, Sorry the the delay in the response, we have moved locations and restructured a bit. Are you still interested in an enclosure? Andrew
-
98 blazer ported box 4 sa 12s
Hello, Sorry the the delay in the response, we have moved locations and restructured a bit. Are you still interested in an enclosure? Andrew
-
Ported box for 2 12" BLs
Hello, Sorry the the delay in the response, we have moved locations and restructured a bit. Are you still interested in an enclosure? Andrew
-
quote for fi bl 12
Hello, Sorry the the delay in the response, we have moved locations and restructured a bit. Are you still interested in an enclosure? Andrew
-
Enclosure Quotes for a FI Q 12
Hello, Sorry the the delay in the response, we have moved locations and restructured a bit. Are you still interested in an enclosure? Andrew
-
Enclosure for DC level 4 15"
Hello, Sorry the the delay in the response, we have moved locations and restructured a bit. Are you still interested in an enclosure? Andrew
-
Sealed Enclosure for 12" XCON
Hello, Sorry the the delay in the response, we have moved locations and restructured a bit. Are you still interested in an enclosure? Andrew
-
Vented box for 10"FI Q
Ok current design I have is: 17.25 deep 11.25 tall 20.75 wide (1) Three Inch Aero Port 1.2 Cubes @33 Hz Plexi Window 8 tall by 18 wide. Andrew
-
Moving Sale Thread!!! Wire, terminals etc!
Ok here are some things I want to get rid of! All of these items are brand new and never used! 4ft 10 inches of Stinger 1/0 Red. This is the uber flexible stuff etc! $16 Shipped 7ft 10 inches of Stinger 1/0 Clear. This is the uber flexible stuff etc! $24 Shipped Stinger battery terminal. $16 Shipped Stinger distro block. $10 Shipped 14ft 9 inches of Stinger 1/0 Blue. This is the uber flexible stuff etc! $44 Shipped 13ft 8 inches of Stinger 1/0 Black. This is the uber flexible stuff etc! $41 Shipped There will be more to come! Andrew
-
New Location is a GO!!!!
Why thank you Mark likes it a lot too! Andrew
-
New Location is a GO!!!!
Argent Audio will be up and running in its new location on MONDAY MARCH 28th! We would like to thank you as we have been in this transitional phase, it has taken a bit longer than expected! We know many people are wanting an enclosure so this is for you. We are now taking deposits and it is first come first serve to get yours built. Please reply to this info in a new thread with the following info: Vehicle Make and Model: Direct of Box/Subs: Sealed or Ported: Number of Subs: Brand and Model of Subs: Max Dimensions: Zip Code for Shipping Quote: Any other notes: If you have already stated an email conversation with me in the past about an enclosure please reference your email address and name so we can pick up where we left off. If you would prefer to call you can, (408) 465-9065. Thanks so much, Andrew Gutierrez - Owner
-
For people waiting for quotes. (Pics of new location!!!
Argent Audio will be up and running in its new location on MONDAY MARCH 28th! We would like to thank you as we have been in this transitional phase, it has taken a bit longer than expected! We know many people are wanting an enclosure so this is for you. We are now taking deposits and it is first come first serve to get yours built. Please reply to this info in a new thread with the following info: Vehicle Make and Model: Direct of Box/Subs: Sealed or Ported: Number of Subs: Brand and Model of Subs: Max Dimensions: Zip Code for Shipping Quote: Any other notes: If you have already stated an email conversation with me in the past about an enclosure please reference your email address and name so we can pick up where we left off. If you would prefer to call you can, (408) 465-9065. Thanks so much, Andrew Gutierrez - Owner