Adrian_D

So you go there and crush their dreams and hopes I'd hate you so much

Fucking awesome movie !

*facepalm*

This time of year my entire hand is dry, cracked and bleeding. My knuckles are get dry and bleed because of the cold. When it happens I have some lotion with vitamin A, it works awesome.

The scenery in the G+ pic is awesome

Not very deep snow but I was scraping it with the diffs in a few spots. Quite a bitch to drive up, even with snow chains on the rear tires. Shot leaf springs = tons of wheel hop and it doesn't help traction at all.

OH SNAP ! I actually miss getting payed to play around with the backhoe

Pics will be needed. Don't mind the mess, I have kids. I need to figure out better placement of the surround sound as this config echo's like mad. The were next to the tv before with the center on the wall above. Insane how thin this thing is. Wow, TV's nowadays sure are thin

I want to know how she managed to live long enough to make that video. What the heck is in our water supply ?

Fiberglassing in 20F....

Donuts are no fun with FWD

Basically yes but you forgot the sanding Wrapping is kind of cool if you have a heat gun. Oh I don't sand. I don't have a sprayer for the adhesive or heat gun. :/ I do have contact cement that works pretty well, but wrapping is always a Bitch for me. I should practice it more when I have some time. For the primer and clear coat do you have any brand or type suggestions? This is all new to me. I also got cabosil for smoothing out the last layer, but it'll be harder to sand. I don't have a sprayer either I just use some cheap contact cement, the same I use to carpet boxes. Works fine

Basically yes but you forgot the sanding Wrapping is kind of cool if you have a heat gun.

Yeah No salt on the road = no salt on the car = less chances of rust. I try to drive as little as possible in the winter just because of the salt on the road

The only good thing is that the plowers didn't do their work and there is very very little salt on the road

Snow snow and more snow. The worst are the sunday drivers, which either move around like they are half-dead or move around like they are playing Gran Turismo.

X2. Plus those look like car recovery cranes, which are stupid to use in such a situation because they don't lift by means of cable, but by moving the whole arm. If the poopie hits the fan, no time to react and drop the load. With a regular construction crane things would have been much safer. I personally was close to a crane which almost toppled over. The operator was quick to release the cable and nothing bad happened.

That is a pretty good idea to conserve trunk space. I've seen something similar before and thought it was clever too DC650.6. Doesn't look like a DC reference. Those have different terminals

Forgot my camera so no pics from today. Managed to get stuck, snow chains fixed to the rescue.. 2 things learned today: wheel hop is a horrible thing and I really need lockers.

That is a pretty good idea to conserve trunk space. I've seen something similar before and thought it was clever too Fucker has a Zapco 1000.4 I want one of those

Depends on who is at the defense. Okay, then if I am the one on that side during the defense of the resume. My defense was a little nerve racking. Had close to 75 people in a very steep lecture hall and I presented with a 15' screen behind me. Sounds like my senior thesis. Either way I said write, not defend Write, yes I do agree. I rambled for 25-30 pages before really getting down to much specific focus or detail. Then it took me a while to wrangle my thoughts and bring it to a concise close towards the end. Granted mine wasn't a thesis but a diploma project. I would have loved more time to explain

I was just thinking.....my port area now is 50.26 sq inches (less than you would have used). That is about 12.5 sq inches per cube. This fits the general assumption that 12-16 sq inches per cube is adequate. This is not an accurate way to calculate port area needed. That was why I called it a general assumption. I am trying to determine if a 8" areo is too big of a port to use with this sub and 4-4.5 cubes. I am far from a seasoned enclosure designer. I want to get my second enclosure design correct. I like to use aeros because they are simpler to build with and weigh much less than a slot port. An 8 inch aero is not too much. I hope some other people can give you some more opinions. X2 on that. On all my boxes I go for at least 1/3 of the SD, the closer I can get to 1/2, the better and I have never had problems with peakiness. That seems to be mostly tuning related

It's less colder and thus snows more. I can take snow instead of below 0F. Snow wheeling tomorrow !!! With pics

Notepad++ is way better

That thing sounds sweet I'll have to make a vid of the Jeep's exhaust, for a 4 cylinder diesel it doesn't sound half-bad under load Pretty curious to hear it with a VNT turbo.