Adrian_D

Trying Czech next weekend. Draft by default, I got spoiled with some Holsten draft, delicious. The bar was effed up, only 3 brands. The other two were local brews and worse than Peroni

Peroni beer sucks.

Useful! Why ? Especially in a well designed link system. No shit. I can't even figure out how they'd work in this instance. That was my reaction; here are Lakewood's offerings These are for listed for '64-'77 GM's These are listed for '78-87 GM's These are listed for '79-'95 Mustangs/Capris Competition Engineering sells similar kits as well :puzzled: I understand their theory, but the trailing arms are already locating the axle and controlling wrap, so I see no need for the traction bars. I don't know what instance you are thinking of, but they add strength and support when you have a lifted vehicle OR are offroading or racing (any kind). I don't know what you plan on doing. How so? You are locating and controlling the axle with the link system. How is the traction bar installed as shown in the photos going to help? If you have enough distortion in the system to make them work, the initial design is piss poor and the bars are nothing but a band aid for a weak design. Took the words out of my mouth !

Useful! Why ? Especially in a well designed link system.

My friends over at MTX insisted on it. I edited that after re-reading the first post <--- BUSTED What impedance do you plan to wire these to ? strapped at 1 ohm DCR ? Mandatory question, gut pics ?

they make the sedan as well with the same engine Hence the "sacrificing interior and trunk space" part super sedans/wagons > * *dreams about a 95-96 wrx wagon*

Yay for flares. Been getting fast at sanding, still have 9 8 inch flares to build and sand for one order

Curious to see this unfold. Port area looks good for 2 18's.

WD Black in your favorite brand external case with a E-sata port Settled

If you want to improve your scores over the XXX4000, this is not for you. Lots of other options though.

To add to the above questions, what voice coil config ? Port area ? Why not aero ports ? Keep working on the whole install, big scores aren't made in a few days !

I'll check them out in the second half of this month. WD and Seagate is the starting point, let's see what the shops have to offer

Happy birthday

Can I help answer buy asking a dumb question? Why do you want external and what will you store? External since it will be connected to a laptop and it will store mostly media.

HAPPY BIRTHDAY ! ! !

Get well soon man !

Sean, any recommendations on an external hdd ? Not ssd.

I've used mine in about 6 cubes at 29hz, powered with a 2000w Lightning Audio amp, it was a beast.

Install and box dependent Build a right box for 12's and they will play just as low. In time you will get used to the sound, mostly ear damage and you'll be in the position of needing more again Try going without bass a week or two, see how your setup sounds after that Or try another box for the ssd's.

So I am able to turn the HU level up higher on say the sample song to closer match the power I see using a 0db test tone? Just listen for clipping correct? And thanks for the reply! Yes, you are able to turn it up higher if the song is recorder low. To get a really good idea on the sound of clipping, play some square waves, that will get you accustomed with clipping really fast and you will pick it up in music much easier.

We're waiting for the university semester to start

I think it's telling you it needs to go off-road

Budapest my ass and the accent is bad

Thanks guys Ended up celebrating by...ummm...working...

Yes, it sounds weird, mostly because of the fraud risk. If you really want the product, you could cover the fees (3%) and send the money as for a product. That way, except for a fraud attempt I can't see a reason why the seller would still want payment as a gift. Same goes for payment for service.