Adrian_D

I know right?? I've just got issues. Nothing determination can't take care of. Good that you keep a positive attitude but those are a lot of things going wrong at the same time.

Bit link : Bosch 85910M SC 1/4 X 3/4 UPSPIRAL 2F 1/4S | AceTool.com

Did you get cake ?

Hmm, AceTool ships international, takes paypal and has the cheapest Bosch up-spiral bits. Yep, $13 + shipping is much better than $30 local for straight cut.

Eff buying router bits. I'm not going to spend $30 on a straight cut bit :|

18, what are you building...

For me the oscillopscope has been helpful in interpreting the changes in sound when setting the gain. You should be able to hear stress in the speakers / subs with music, which is more important than setting the gain with an oscilloscope.

I drove around Colbert Hills (Its on the Masters Tour) here in Manhattan one day for work in an open top Gator, talk about the most nasty wind currents I've ever felt driving around. That course is WICKED. and I thought we had it bad here on the Arkansas courses! Adrian that's cool, at least you enjoy it probably =) Building boxes is kind of relaxing but I had very little time to work on my own system.

More or less, yes. But that's because I couldn't find a real job that I can do in parallel with school. I can install or build any time I don't have to go to classes or labs.

Foun dsome spare mdf disks and took them to the machine shop. Time for 8 inch flares and the arsenal will be complete. 6, 8 and 12 inch flare molds

what you doin now? 4 rings for 2 Seas L22's. Order for a customer. But my 1/4" bit broke after 1 ring

Time to get the work clothes on and cut 4 mdf rings. It's cold but work pays.

This is ad is against forum rules.

Eff this weather. high 30's all week. And a bit of wind.

The main advantage of the p800 in this case is the separate left/right eq, which isn't found on the H100. Since you already have the H100, stick with it. As far as I can tell it was really easy to work with an ipod or a memory card.

What does your electrical consist of ? Without knowing too much about your install, I'd keep it safe and simple with one 2500.

Hello MSN/Bing bot

You already have them, why not try them out ? And take some gut pics too, I'm curious to see them naked.

Having the speakers in the same enclosure will help mediate the difference in parameters between them. I would build a new box for both.

Well, it's settled then I'll build a 2.8cf box and see how my efficiency climbs. Curious to see what kind of gain I get if I increase the port area, going from a 6 inch aero to an 8 inch one.

Nice first post in the ihop.

Do want If I were in the market for amps I'd scoop them up.

T/A off. Using a cd you are very familiar with or you know how should sound will help a lot.

2.5cf should be a bit better than the tiny box I'm using now. If I can't get other ideas I'll just go for that size. Somebody has to use btl's in spl setups

Any copper wire, if it's not tinned or soldered to a ring terminal will corrode. So it's not just a welding wire problem. I'll have to check how my wire ends look 2 years after they were installed. imho, welding wire is used in much more unforgiving conditions than a car and holds up to the task.