ssh

No. And changing comp sets isn't the best way to get their either. I asked if it was a bad idea, you said no, but I'm assuming you mean no in general to the whole thing. So if I wanted more midbass, instead of mounting fifty speakers on my door panels, what would you suggest. If I crossover the subwoofers higher then it starts to sound sloppy, not as "tight". Simply put, my goal is more midbass. I have the door, dash, and kick panels to work with. Or maybe I should just look for the speaker with the highest RMS rating and give it as much power as I can before it blows. Instead of pointing the kick panel speakers from opposite sides (ex, speaker on driver side point to passenger, passenger speaker pointed to driver.) if I pointed both speakers to the driver? I haven't read a whole lot on alignments... I see JL has a 6.5" subwoofer, JL Audio 6W3V3-4.......................................... I installed one of those once, it's a midbass at best, keep in mind it's built to work as a sub. You are better off with an SLS 6.5. My car is aligned selfishly. Both drivers aimed so that they stage the best. Seeing people point speakers at the rear view mirror makes me chuckle You listen with your ears, not with your eyes. I'll look into the peerless, I also forgot that the exodus anarchy 6.5's are being blown out. $65usd a pop. And found a bunch more peerless, scan-speak, and seas prestige 6.5s on madisound... the fun begins, I mine as well just flip a coin.

Someone needs to buy my xcons so I can buy a pair of these!!!!!!

Sun Systems was trying to do that in the 90s I believe. Cloud technology sorta. Of course back then they didn't have mp3s, movies, photos, flash websites with graphics, etc to all be transferred back and forth.

Or when you decide you need to save something or email it to a friend.

No. And changing comp sets isn't the best way to get their either. I asked if it was a bad idea, you said no, but I'm assuming you mean no in general to the whole thing. So if I wanted more midbass, instead of mounting fifty speakers on my door panels, what would you suggest. If I crossover the subwoofers higher then it starts to sound sloppy, not as "tight". Simply put, my goal is more midbass. I have the door, dash, and kick panels to work with. Or maybe I should just look for the speaker with the highest RMS rating and give it as much power as I can before it blows. Instead of pointing the kick panel speakers from opposite sides (ex, speaker on driver side point to passenger, passenger speaker pointed to driver.) if I pointed both speakers to the driver? I haven't read a whole lot on alignments... I see JL has a 6.5" subwoofer, JL Audio 6W3V3-4..........................................

Some use hydraulic crimper. I've always used a vice, then blowtorched the end til it was hot, then pushed the solder right in. Solder melts and fills all the gaps. Then wrap with electrical tape or heat shrink.

Sean, If I wanted more midbass, and I already had 6.5"s in the kickpanels, would it be a bad idea to add another pair of the same 6.5"s into the dash (firing towards windshield). Already planning on replacing my current 6.5" comp set to something nicer, perhaps morel maximo or morel tempo, but I'm feeling like they'll sound much better, but may not have enough "omph". maximos are 125, tempos 240, my budget is basically 250, so I could do the better line in kick panels, or two sets of the lower line (one set in kick panels, other in dash). I've read a bunch of reviews of both sets, raving about the midbass and soft tweeter (I don't want anything harsh).

Anyone ever hear the morel tempo line? Closest place to hear them is 2hours from me, I'm assuming they gotta be better the $100 vibe comp set I have. All the reviews I read online, everyone raved about them.

I saw the outside of the amp and was like damn, it looks just like it, pretty neat. Then saw the interior and holy shit! That's some awesome work

Any updates?

As Sean said, I was just posting an example of what 95Honda was talking about.

I wonder what power rating is used in that formula...

example, Port Diameter: 4in Number of Ports: 1 Port Length: 6.48in Port Area Total: 12.57in Tuning: 30hz Enclosure Volume: 4ft^3 Port Diameter: 4in Number of Ports: 4 Port Length Each: 34.7in Port Area Total: 50.27in Tuning: 30hz Enclosure Volume: 4ft^3

WIN.

Dude just chill out, everyone's done talking about it... Happy Birthday. Time for me to make a shake.

Looking good Steve.

Hey, come up with something original next time instead of just copying everything I say. Hey I was just looking through your window and didn't see anything else I could copy and say.

Video of my dirt bike trip in Flagstaff, AZ from last month-ish.

Yeah, the majority of the time they fuck up the measurements.

A table saw would help. If you can get / borrow a plunge router with a jasper jig then cutting circular holes for the drivers will be easy, if not you can use the jigsaw for it. Make sure you have a bunch of big clamps, those will come in handy. I would get some wood and just do some practice cuts. Also, for like twenty to thirty bucks you can have RAM Designs make an enclosure design for you, along with cutout sheets, that should make things a bit easier. Wow, Imp literally just posted right before me. Now I sound redundant.

Your right, it's none of my business. I just thought it was funny at first.

Should get loud. Is that a single baffle I see?

Well I didn't get out for my mtb ride, hopefully it's overcast tomorrow! Did some fiberglassing, I'm getting better.

Make a video putting the box in the car.

LOL. Is he just intentionally being a dick, or? I would laugh my ass off if you did end up getting him banned.