Everything posted by ssh
-
Wild / Amazing / Dumbstruck / Motivating / Awesome / Moving Photos
I don't believe I've seen that part of the grand canyon, picture is sweet, like an hdr.
-
cop cars with subwoofers?
Do they list what frequency or frequency range their using?
-
Wild / Amazing / Dumbstruck / Motivating / Awesome / Moving Photos
Hahahaha
-
fiberglass resin on subwoofer box question
Smoother interior, better airflow. If done right, you can generally gain a tenth or so on a TL. Not really worth it unless doing serious competing and need that little extra
-
Wire Comparisons
Great write up, appreciate the time you spent doing it, and the donations of wire others sent you
-
4 Zcon 18s = Tap Out
Ay, ya, ya, ay!!!... Hey what's with the modified caulking gun on the steering wheel? Is that to keep the engine revving, or is that the just in case brake? Pretty hard core. It's for when he does a run, he can be outside the vehicle but the engine is being revved.
- Guess this FLEX!
-
Does low Qes = greater impedance rise?
Have you clamped your amps and calculated your imp rise? I think you'll be surprised when you do it.
-
Does low Qes = greater impedance rise?
Take a read on here, http://www.bcae1.com/spboxad2.htm May not be an answer but it deals somewhat with the subject.
-
Guess this FLEX!
I thought we came to the conclusion it was 31.2 to 54.1hz?!
-
Help me pick my new sub stage
I think it will largely depend on how much power that alt can really make.
-
Wild / Amazing / Dumbstruck / Motivating / Awesome / Moving Photos
I have it in my queue on netflix, been meaning to watch it
-
System for my Hyundai - Sundown,JL Audio, Crescendo, Audiocontrol, DEI
The dewalt I got was around 80 bucks, could also check harbor freight for a cheap one still gonna help here and there
-
Wild / Amazing / Dumbstruck / Motivating / Awesome / Moving Photos
Well thank you for the new wallpaper, no cops at my house Was that made by banksy the street artist?
-
Help me pick my new sub stage
So your starting battery and one extra in the rear. Yeah I was thinking: starting battery and 2 in rear. Well your going to be hardpressed. Better hope that 320a alt is legitimate, AND decent idle.
-
Help me pick my new sub stage
Only one way to find out I would definitely get the alternator and batteries, and the rest of your equipment, if bad voltage drop is present and you don't have the room / money for extra batteries, turn down the gain on the 4500d. Or get a 3000d. Also depends on which batteries your looking at. I would get the biggest batts you can fit / afford.
-
Help me pick my new sub stage
If properly sealed from the trunk, your cabin volume would drop slightly, thus less room to pressurize, more cabin gain, more output I've always read from quite a few people that when they fired forward, they had a little better sq. Oh and your trunk shouldn't flex like a bitch, no nasty annoying ass trunk rattle LOL, beat me to it... yeah, what he said...... Another thing if you fire forward and seal, you can space it out a few inches from where the rear seats rest in the up position. Then if you have people in the back, just put your seats up and you can still play music (although it may be a bit quieter) and your drivers won't hit the seats. Then when no ones in the back, just have the seats down and let it rip. Best of both worlds if you ask me.
-
Wild / Amazing / Dumbstruck / Motivating / Awesome / Moving Photos
Lol.
-
Help me pick my new sub stage
If properly sealed from the trunk, your cabin volume would drop slightly, thus less room to pressurize, more cabin gain, more output I've always read from quite a few people that when they fired forward, they had a little better sq. Oh and your trunk shouldn't flex like a bitch, no nasty annoying ass trunk rattle
-
System for my Hyundai - Sundown,JL Audio, Crescendo, Audiocontrol, DEI
If you have an air compressor then there's a whole slew of different sanders you can get, and they'll make life way easier. If not, you can look into the electrical orbital sanders, most are around 4"-5", they use either PSA pressure sensitive adhesive pads or a hook and loop setup. So whichever orbital sander you get, make sure you get the right pad types to match. I just bought a dewalt off amazon and they listed an assorted box of pads to go along with it, I just assumed they were the correct type. I ended up with a psa type sander and a box of hook and loop pads. Fortunately I was able to just spray the sander pad with 3m adhesive and stick the hook and loop pad (sanding disc) right on. Hope someone can learn from my mistakes
-
Hairtrick questions?
lol. It's a new thing, trunk holes, specifically designed to mount circular shit in.
-
System for my Hyundai - Sundown,JL Audio, Crescendo, Audiocontrol, DEI
I bought an orbital sander to help with the big open areas, it's helped cut down some sanding time, but for small stuff and curves it won't help much since the pads are like 4" 5" in diameter.
-
Wild / Amazing / Dumbstruck / Motivating / Awesome / Moving Photos
- Wild / Amazing / Dumbstruck / Motivating / Awesome / Moving Photos
Rossi is unbelievable man. If you aren't familiar with him read on wikipedia, search on youtube. Check out noriyuki haga too Video of Rossi duking it out with Stoner- Fusing on alternator
Dc lists their output ratings when hot iirc - Wild / Amazing / Dumbstruck / Motivating / Awesome / Moving Photos