klee7013

more pics of 2 subs mounted in just a bit

hmmm hope we dont have to wait a year for pics of what your doing now

dam was gonna call bs then i saw jacob posted so i knew it would be could- cant wait to see this one finished--

Tim Hudson makes $15,000 after the following... .05 Games .03 Wins .21 Strikeouts .36 Innings pitched You will need to work 622.22 years in order to make Tim Hudson's annual salary. only 602 more to go lol

got a mbquart 4125 and alpine type r components in the front and trpe r coaxials in the bac recommended rms 110 for front and 100 for back i know you dont set these by output voltage but tested and the most output voltage was 8 volts ac after i thought i had it set right could i have my gain set to low- or my filters set wrong-- i know yall are gonna go ask so i will go out and see exactly what i have everything set at also for my sundown sae1200dv2 wired up to 3 sa8s wired up to 1.3 ohms the voltage should be around 40 vac or am i wrong on that- when i just checked what the amp was pushing before i messed with gains (subs were not hooked up) iit was 100 vac at max good thing i checked -- ' also with this i have trouble setting gains to what i am trying to achieve-- gonna go check sorry for the noob post i got an pioneer avh4100 i think that does 4.2 or something like that so i did 1/3 of a turn above min on sae and 1/3 of a turn from 6v cant want looks likes i may have my box in this weekend-- for any of yall that have been watching it

would love to come but got to work Saturday if u still do it after then i might go just to meet everybody- i guess i would test mine to even tough i didnt make it to be loud- just wanted some thump good luck on the turn out this weekend would love to see some pics or maybe vids

ya i have seen one of those used at a house showing where all the air leaks where-- around sockets- attic doors- can lgihts- then they went and sealed them up-- but i believe u don't want your house as tight as can be i like a house to breathe - it seems house that are sealed up tend to have lots of problems just my POV

thanks had alot of rough edges on the boxes sanded down and know im all itchy and nose is clogged up with all that fine dust- should a wore my mask but i forgot

good stuff- got the doors done- used almost 3/4 of the box sent usps of the cld on all the doors- got a little trimming left- the mid bass went from ehh- to dam i didnt know these had that in them-- i was opening everything up i was like where the hell is the velcro and cement about 30 mins later i went thanks for the great product again

mid bass turned from ehh i thought these speakers where good to dam where the hell did that come from right hand looks like i put it in a brier patch and twist and turned it around then pulled out- ouch

more pics of the doors- for the most part they are all done- jsut got to trim the front doors up a wee b it so they can fit- they pop out with a lilttle tub- got to scrap off some ccf where they hit and wont got any deeper pic of the cld on back doors some more pics cutting the mlv mlv test fit ccf before trimmed

thanks ya when i get it all in i am going to need some help tuning it to make it perfect would love to check yours out someday also you still in myrtle beach every now and then if so hopefully i will have this finished in a week or so--(cant even count how many times i said that throughout this build) and i can ride up there and meet you and get a demo of yours also thanks for all the help you have given me so far

thanks scott and chicago --- scott i have always watched your stuff and could tell you had lots of knowledge over on club frontier then i came here and found you again chicago i love ur vids with your sa8s arent you upgrading to sa10s or 12s or did you change your mind?

some deadening of passenger side door- just with that one door done it sound alot better and louder- cant wait to get them all done sorry its always dark when i take pictures test fitting mlv didnt take a pic of ccf on mlv sorry i get into it and cant stop till its done i am like shit forgot to take pics i know i did i did the mlv /ccf pretty good because it was a pain putting the door panel back on got it just hitting the edge around most of the panel Look for more updates tomorrow- hopefully alot more

I raise you a dB. I'm waitin' on the vids and I raise you 2dB I am all in and will ask the wife to film it. Good Luck with that! If you seen me in person you'll know. I can convince a nun to lose control. But really OP, ask shizzzon about the secret project from DC Power. I am completely sure they can give you an alt no one else can. Starts thread out wit 175dB and you get 30 virgin supermodels filmed by someone's wife and the world's biggest baddest ass alternator company DC Power. lol. reminded me of

2 pic of testing tonight- i cant ever take alot when i want to because my dad is helping me out and he always act like he has something better to do so i try not to take to much time to take pics subs mounted in the box on my makeshift mdf/sawhorse table i have been using for about 3 weeks pic of wire going out of back window connecting to the box sorry about terrible quality pics with the phone and was playing music one reasons subs where blury thats it for tonight plans for tomorrow leave work ASAP (usually i sit around and BS) hopefully i can get the rest of the fiberglass done- didn't see any flex or cracking just one corner where i was almost postie i was gonna have problems so no big deal Take the front door panels back off and apply some tiles, rope, and fit the ccf and mlv- then go test out what a difference that makes i hope alot hopefully by then glass will be dry so i can cut/sand rough edges off and vacuum all the dam mat i got floating every where for over the last month my build has been moved from work where i started cutting wood, to a shed at the old house i used to live at while it was on the market, then to a cramped shed at the new house-- k night night and thanks for the compliments i defiantly wouldn't have tackled this without all the helpful people on this forum

Tested out tonight a little more fiberglass had 1lil air leak . Then lots of finishing work. Is vinyl hard to do if so I may carpet. Can't type well on the phone

some sound deadner showdown the roll is my CCF and MLV cant tell you how long it took my to find the velcro and glue lol also pic of ohm reading i got when i wired up the subs maybe i can test them out tonight just to check out box if it has any leak or flexs if not i will put it in and leave it til i can wrap it with something and do the finishing touches

or you could always get it delivered to a place you work at so you are there when it comes in to check- thats what i do with electronic stuff-- also to hide from a few people

hmmm thanks for the feedback- guess i need to go buy some more wire

Trying to wire up now- not worried about what ohm to wire it up to got that i got 3 and i am wiring it to 1.33 ohms and i was gonna just use the wire terminal as a jumper to get the neutral and power wire to the other subs like 2 wires on the terminals on 2 of the subs and the last sub will just have 1 wire into all the terminals because i dont have to jump it on the far end so my question is can two 12 gauge wires fit in one of the terminal in the sa8-- if not would it be better to run a seperate run for each speaker to where the wires are coming into the box- or would wire nutting them and getting a good tape job be good enough cant wait to try these out-to make sure my box is good so i can put the evercoat rage on and wrap it up so i can be bumping again thanks kevin

i voted like 1.5 weeks ago if ya need me to vote again i can go to work and make an account and vote - love ur vids keep it up

filing a claim at usps is BS did it 5 times came back with 0 things acomplished and a waste of my time- 3 where i shipped a book out in a box and all the came back was the box wtf other 1 where i recieved a package that had a big ass foot print on it again nothing solved last one i received and envlope that had nothing in it - atleast the person i bought from this time had great service and sent it out for me again f the usps

will be looking forward to a vid/pics when i wake up in the am