GeorgeW.Kush

Man thanks very much this has to be one of the best if not the best forums I have been on, from the quick informative responses to the straight forward right to the point answers, you guys really rock, thanks!!!

Hip Hop and some R&B, and my amp is an Alphasonik PMA1000DA, it does a little over 1000 @ 4 ohms

well I am looking for super loud and super low also I have the room for the recommend 1.25 so i think that is what I will do, also will one style port be better that the other when it comes to port noise

Hey people I am going to be getting 2 DCON 10's for under the back seat of my pickup, and I know that the optimum recommended ported box is 1.25 @ 33hz after displacement, so my question is, since this will be in a pick up under the back seat, with the subs forward firing and the ports are going to be on the sides of the box firing into the doors, what type of port should I use, aero ports or slot ports. Also if I should go with aeros, what size and what length, and if I should go with slot ports, what dimensions, also I say a guy on here that put his DCON 10 in a 1.3 cu. ft. box @ 33 hz, what advantages and disadvantages will I see by going with this size over the 1.25 recommended?

I am looking for the loudest lowest playing setup within the space I have available, I have about 1.36 per sub with displacement under my back seat, I have 2100 @ 1 ohm and I listen to mostly reap and r&b if this helps narrow done my choice, like I stated before I am trying to find a setup that I wont have to replace anytime soon!!!

Hey this guy I know said I should look into the DC LVL3 10 he said it was really assume but I have never heard one in person, so my question is would you still go with the DCON or the LVL3 10, the reason I am asking all these question is that I dont want to have to buy another system after this one, I've been through a few and I am tired of swopping them out and paying the money for them, any thoughts on this

DCON

Okay then what would be the best box size i see different ones, 1.25, 1.30,

ok cool but for the same money I can get 2 JL W3V3's which would be the better setup and which would more that likely be louder and play lower

I have an Alphasonik PMA1000DA and i am thinking about 1.25 after displacement but what should I tune to I want the loudest lowest bass but I also want a well rounded sound

I am thinking about getting 2 DCON 10's D4's and wiring them to 4 ohms and my amp is 1000 watts @ 4 ohms and I want to know is 500 a piece is to much for these, also what will be the best size ported enclosure and what should I tune it to