Davo2378

Well I got a little bit of work done today, Tomorrow I will run all my power and grounds.

Thats awsome and are they 300w RMS?

yeah i got it to, and the way the box is right now with the woofer displacements in, the box is tuned to high so I'm going to do something to it, with out making a new one

ok so what is the woofer displacements for two sa-15's, because i have no idea what it is

what dose everyone else think

Thats just what I think if anyone can figger that out.

it should be fine i think, By taking the inch out of the box that makes the box 7ft^3 net on the inside, so then i put 7 in the box for DESIRED NET VOLUME on the calulater, then chang the port size on the calulator and it should think thats its useing just thicker MDF wouldent it and not mess with anything because the inside of the box is not changing it's always going to be 7

it has right now 120in and almost 39Hz and i dont know but it just dosent sound right to me, but i will say that rock music sounds great on it but thats about it, i think its just tuned to high.

OK as of right now my box this like this. And now I wanna do this to it, if I take 1" out of the top and make it 18" tall it will make the box 7ft^3 net, and now i take 3/4" mdf and put is on the inside of the port and make the port 4.5H by 18.5W and keep it 16.5D It should tune it to 35Hz. The red is the new MDF in the port can I do this and will it work?!?!?

Looks good man My Build

Well I got the first of two XS 1200 when i got home tonight. It's looks so little, buts its 35lbs. and straight from outside to 12.62.

I was thinking of useing the precision ports but never got around to buy any so i just made this for now

Well the box is 9ft3 7.5ft on the inside, and the port is 120in2 tuned to 37 38Hz

I have mine up and going right now, not dont with it yet.

thanks I will try that change them around and see what it dose, I have them hooked up like the manual and they seam to be fine,

its says Fuse rating 40A x 4 in the manual so i am thinking a 200A fuse would be fine but thats just what i think

Ok i was looking at the book and it is saying for a 1 or 4 ohm load hook the - neg. of the sub to the + pos. of the amp and + pos. of the sub to the - neg. of the amp????? is that right

Ok i was looking at the book and it is saying for a 1 or 4 ohm load hook the - neg. of the sub to the + pos. of the amp and + pos. of the sub to the - neg. of the amp????? is that right

The NEW SAZ-1500d .v2's I am only going to use one of them on the 15's, the other one is going under the bed tell my next build.

Guess what just showed up

thanks all, and i'm not going to do anything to the box right now i will wait and see what the 1500 will do to them

well i would of got my amps today if i was home but i work out of town during the week but i'm going home tomorrow so i will get them then, and i just ordered one of two XS Power D1200 from Autopartsdealer.com it was about 20 bucks cheaper then SSA or from XS Power and i will get it next week sometime, and now i'm just ordering all the little things i need to finish it up

it is tuned alittle high but like i said its my first build and its around 37, 38Hz it dosent hit the lows like i want it. and as of right now it has a JL 500/1 on them but soon to be the new saz-1500d .v2

A little free air test run before i start on the box.

The box is not finished yet, sorry not more pictures of the build to busy, but i still have to router the port the top and paint it, and I may even cut an inch of the box out somewhere bc it is a little to tall but we will see. Amps should be where wednesday I hope, and with them i still have to run power and ground to the back and get another battery and a new atternater but atternater will probably be the last thing i buy. Thats all for now but it's in and pounding