MikeMartel

Unless your looking to keep your 18 in a sealed box, id say go with the 2 12's.. that would be cutting it a bit low for an 18" woofer with only 5.5 cubes

I guess im not the nest person to answer this considering i havent dealt with either, i just think you should do some research and decide if your looking more towards an SQ setup, or your more interested in SPL

Depends on what your looking for.. Are you leaning more towards SQ subs or SPL subs?

Hm... Thats a bit of a difference there.. What are you looking to accomplish with your setup?

Well, as soon i get some money from selling all of my old gear, ill be doing Big 3, and getting a second battery. Ill make sure my electrical system is good and sound once i install everything.

I listen to rock, metal, techno some rap. Basically everything, thats why i wanted the Q.. because its a very accurate subwoofer, and i asked him why he recommended the BL, and he said the BL can take more abuse, he didnt want me to blow my first real subs, but i think i have enough knowledge that i wont blow them. I appreciate his opinion but im sticking with the Q's.

Alright, thanks for that opinion, Keep more coming. I want my first real build to be as best as possible.

They look beautiful ;D

Alright, iv basically all over the map trying to consider what type of subs i wanted. Iv made up my mind now and i kind of wanted to know your opinion. I was thinking about going with two Fi 12"Q's, OR two Fi 15" Q's in a ported box, running off a Crescendo BC2000D. Now in order to eliminate trunk rattle, i was told sealing it off from the trunk and firing it forward was a good idea. The only problem is that i cant fold my rear seats down, now i do have the option of buying rear folding seats for about $300. I guess i dont really have a specific question.. just tell me what you think, any improvements or different ideas you think would work best. Since im fairly new im sure your ideas are better than mine. ^^ thanks -Mike

You know what, iv changed my mind, anyone really in the Niagara Region with any type of Fi, id love to hear them... Based on income and stuff... idk im still up in the air about what i really want to get, i cant decide, so many nice Fi subwofoers

Man like 25 views and only 1 reply BTL's arent very popular up hear in Canada ;P

Hey guys, feeling kinda bored this week, not a lot going on and i decided i want to hear a demo of Fi BTL N2's before i end up buying them and i would love to listen to all different sizes. I'm located in St. Catharines, Ontario, Canada. So basically anyone from Ontario in the Niagara region ill drive down for a demo. Hopefully theres at least one person! Iv never heard BTL's and im absolutely stoked

Exactly what I was thinking just put it in the trunk.

Hello, iv just been looking around for a battery and oddly enough i found a marine AMG battery in my dads garage. Its a Cabela's Advanced Angler "Group Size 30" battery. Heres a link showing all of its specs. http://www.cabelas.com/product/Boating/AutoBoat-Batteries-Chargers/Marine-Deep-Cycle-Batteries|/pc/104794380/c/104698080/sc/104446080/Cabelas-Advanced-Angler-AGM-Batteries/727395.uts?destination=%2Fcatalog%2Fbrowse%2Fboating-auto-boat-batteries-chargers-marine-deep-cycle-batteries%2F_%2FN-1100564%2FNs-CATEGORY_SEQ_104446080%3FWTz_l%3DSBC%253BMMcat104794380%253Bcat104698080&WTz_l=SBC%3BMMcat104794380%3Bcat104698080%3Bcat104446080 Now seeing the amp rating and cold cranking amps i see no reason why this wouldnt work as a second battery seeing as im running only about 1800 watts. What do you guys think?

Oh... i see >.< I didnt know that input sensitivity and gain are the same thing :S.... Feel retarded now. Anyways, thanks

Iv recently blown my Alpine 1000.1 amplifier so i decided to replace it with an older PG Xenon 1200.1 i had lying around. I was looking at the control knobs and noticed it only has a Bass boost option, but no gain setting. Iv looked it up and its a bass boost knob for 45hz, 0-18db. I was just curious how i would go along setting this boost without a gain setting as well. Also, how should i set my deck settings along with this? I'm running 2 Alpine Type X 10" subwoofers in a ported box if that helps. Thanks -Mike

Sounds great guys, And yes, To OhJay, luckly every police vehicle in the Niagara Region is an Impala So ill check out some junkyards for an alternator i can use. Thanks a lot

I'm getting so many mixed answers here. Lol

Alright. Well, should I get my alternator first. Or should I get my battery?

Ok so you suggest the battery before the high output alternator.. Thanks

Iv got a 2003 Chevy Impala (3.4L), im pretty sure the alternator size is a 105 amp (Sorry for the double post i just saw that you missed it and i wanted to make sure you got the info)

Iv got a 2003 Chevy Impala (3.4L), im pretty sure the alternator size is a 105 amp

Alright, well i just know right now im running only about 1600 watts and my lights dim like crazy, iv actually had my car's battery light flash at me a few times when im really pumping my alpines, so this time i just want to do it right

Now that iv figured out an AudioQue 2200D would be a great choice for my Fi BTL N2, along with my Phoenix Gold 500.4 for my component speakers, i was just wondering what kind of electrical upgrades i would need to support this. (~2700watts). Iv read up on what is needed and im seeing a few mixed results. This is what im thinking: Big 3 240 Amp Alternator Kinetik 2400 Now the kinetik would be replacing my stock battery instead of running my stock and the kinetik. If anyone thinks thats not enough, or i should keep my stock battery or any other ideas it would be a great help.

Alright. Well I'll take a look at buying an audioque then