blunt

Any amp kit suggestions for the 1500D v.2?? Thinking of going with a knukonceptz kit don't know which one though. Any other suggestions? P.s. running 2 Fi SSD12s with it.

I'm excited to get this thing. Ahh. I'm getting my subs tomorrow from UPS.

Thanks guys. I stuck with my first choice and ordered 2 Fi Audio SSD12.

Black Ops: daV1cious one

nobody?

Sidenote I was going to get the dual 1 ohm SSD12 subs. The audioque would underpower them or both amps? My bad if it is in the wrong category.

I was leaning towards getting the Sundown Audio 1200 for when I purchase two Fi Audio SSD12 subs. But came across the Audioque AQ1200D. Is the Audioque AQ1200D a suitable amp to run for the SSD12 subs? AQ1200D: 510X1 @ 4 ohm, 870X1 @ 2 ohm, 1200X1 @1 ohm SAX 1200D: RMS power, 1 ohm mono 1200W x 1CH RMS power, 2 ohm mono 720W x 1CH RMS power, 4 ohm mono 360W x 1CH

cool. let's go with that.

Anybody have any experience with these subs? Any opinions? SEX 12" T/S Parameters: Electrical Q Value (Qes): 0.49 Mechanical Q Value (Qms): 4.5 Total Speaker Q Value (Qts): 0.44 Free Air Resonance (Fs): 25.1 Hz Equivalent Compliance (Vas): 72.9 liters One-Way, Linear Excursion (Xmax): 18 mm Efficiency (SPL 1W/1m): 86.1 dB SPL Effective Piston Area (Sd): 480 cm2 DC Resistance (Re): 2.8 ohm Nominal Impedance (Znom): Dual 2 ohm Thermal Power Handling (Pe): 600 W Force Factor (Bl): 17.7

andrew, so what are we looking at for a price on the ported box that you worked out? You still have the 15% off going on right now right? Thanks for the help.

I think ported might be the way to go.

what do you mean invert? Sorry I'm not very knowledgable when it comes to this stuff. You think a ported enclosure would be better?

I think i could go with 22 on the depth. What are we looking at for prices on the enclosure? Do you recommend ported or sealed for those subs?

Just got a question, trying to find a suitable enclosure that would fit in the trunk of my charger and would be good for 2 SSD12 subs. Would this one work?? http://www.zenclosures.com/Dodge_Charger_Subwoofer_Box_p/chargerrecessface.htm Mounting depth - 9.00" Mounting hole - 9 1/8" for 10" subs & 11 1/8" for 12" subs (Adjustable by request) Total volume of airspace - 2.46ft^3 Adjustable by request (we can only reduce the airspace) Airspace per chamber - 1.23ft^3 -Spencer

the height and width are pretty much set. unless i do some major mods on the trunk. How much does the depth have to increase to make it work? And can you quote me the price for that enclosure? thanks andrew.

it's set at 32" i think. the depth could change a bit tho. would that help? p.s. thanks.

I need an enclosure for 2 Fi Audio SSD12 (Dual 1). This is going in a 2010 Dodge Charger. MAX size would be 32"w x 15"h x 20"d . What do you recommend and how much would that run me? Sub Info: DUAL 1 Sealed box: .7-1.2 cuft Ported box: 1.8-2.5 cuft @ 33Hz Sub OD: 12.500” Cut ID: 11.125” Mounting depth: 6.500” Displacement: 0.14cuft

Post a new thread for an enclosure quote / build. I will have a quote for you tonight. Andrew cool thanks a lot

thanks a lot guys

Which is better to get: dual 1 or dual 2 Fi SSD12 subs? I'm thinking of getting two subs and going with a sundown SAX 1200 amp. Does it matter? Pros and cons of each?

I may have to take advantage of this. I need an enclosure for 2 Fi Audio SSD12 (Dual 1). This is going in a 2010 Dodge Charger. 32"w x 15"h x 20"d. What do you recommend and how much would that run me?

Gianna Blitz?

my bad... the other one can be deleted. thanks.

I was looking at the dual 12" ported khaotik enclosures but it's too big for my trunk.

So reading around I think I have a couple options for subs I would like. These include: 2 Fi Audio SSD12 (Dual 2). Amp/ enclosure suggestion? or 2 Fi Audio X12 (Single 4 - I think) Amp/ enclosure suggestion? or SSA Dcon 12D4 (2) + Sundown Audio SAX-125.2 Combo (need an enclosure suggestion) This is going in a 2010 Dodge Charger. 32"w x 15"h x 20"d to work with. I did find this custom made box that works with my car: http://www.supercrewsound.com/commerce/product.jsp?prodId=431&catId= Thanks. What do you guys think about the aforementioned subs? What's the best bet?