pmureika

If only I had the room for this icon 15. This is a great deal!!!!!!!

He means power wires the grounds don't need to be fused.

I would go with 3 cuft. tuning can be 28 to 32hz.

I don't think are meant for automotive use.

Aren't they ups power backup batteries.

Is it just a split second dimm or it goes down and stays dimm? You need to take some voltage readings at front bat, and at the amp.

Alpine is A high end brand name. So they charge more.

Strapping two amps. You must run a two or four ohm load to the strapped amps because below 2 they wont be stable. Your power will double at 2 ohms. You can't go lower then 2 ohms. You would need 2 D2 subs to get a final two ohm load. http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=2&I=22#results

I apologize "measure the drop across the holder" was too much for my puny brain 2 comprehend i will try this sorry again for my dickery I'm considering this but that would mean a hit on my pocket as I'm hoping 2 sell the extra 1/0 and make some profit this summer If i were to run it tho I am thinking of going straight from alt to the back batt is this ok? I am also worried about my factory alt taking a shit if i add a second run but theres no logic behind that, just a worry Overall if the 13.8 is nothing 2 really worry about especially on 2000watts then i would be ok but i have a bad feeling about how it'll be in the summer heat Do you already have the big three to the front battery? And then a 1/0 to the rear?

This is what I use. http://www.sonicelectronix.com/item_36278_Xscorpion-ANL1010P.html http://www.darvex.com/store/pc/Sound-Quest-ANL-Fuse-Holder-28p365.htm

I don't understand how you can say it is a manufacturer issue ?

x2

Thats what I assumed, across the fuse not at the amp.

Are you measuring right at the fuse?

Use a single pole double throw switch to run either two speakers under the hood or switch it to run the door speakers.

Just remove the chime.

I think its time to close this thread.

According to rockford fosgate. http://www.rockfordfosgate.com/products/product_details.aspx?itemid=117366

http://www.rockfordfosgate.com/products/product_details.aspx?itemid=117366

I dont think you can strap the 1500 or the 2500. http://www.rockfordfosgate.com/products/product_details.aspx?itemid=117366

But no adjustable ssf .

If you strap 2 amps together they act as one. A master and a slave all the adjustments would be made by the master. This eliminates having to set up two amps.

It there a way to determine your exact box tuning ?

im NOT talking about the OP. nevermind. Your talking on how to set it properly.

With the amp he is using if you tun the ssf on it goes to 28hz no adjustment.