sundownz

The latest word I have is still within the end of June ETA.

We didn't have them yet when we made yours Eagle.

I am interested to see what Walt does!

Yah, it'll have it.

Did you order an 18 ?

A pole vent (hole) by itself is not very good cooling. We noticed a big improvement with the plastic cooling plug - and the aluminum is just a better version of that.

Nightshade only.

Decided to open it up with super early pricing : http://www.soundsolutionsaudio.com/forum/i...showtopic=28844

PRE-SALE ORDERS ARE FINAL - THERE WILL BE NO REFUNDS -- If you are not 100% sure you will be financially stable then don't pre-order. No more exceptions. <b>THESE WILL NOT BE IN UNTIL AROUND THE END OF OCTOBER!!!</b> <i>If you want something sooner the 3500s are expected in before the end of August so I suggest getting one of those.</i> DO NOT pre-order if you are in a rush or on a dead-line -- as always there can be delays with pre-orders. Just want that to be clear <img src="http://www.soundsolutionsaudio.com/forum/public/style_emoticons/<#EMO_DIR#>/smile.gif" style="vertical-align:middle" emoid="" border="0" alt="smile.gif" /> In any event... we decided to open up ordering to offer an extra early-bird tiered price structure on the pre-sale. --- <b>PRICING:</b> 1) Before July - $1000 each 2) During July - $1100 each 3) August until October - $1200 each --- <b>TO ORDER - Paypal me @ [email protected]</b> --- Regular price will be $1549 MAP / $2149 MSRP once they are released and on the market... you can buy at a HUGE savings on the pre-sale. The picture is in a generic casing. We are ironing out the details of tooling a case that looks as close as possible to our SAZ casing before release - it will be a wider case but will look as similar as possible to the SAZ amps. Pictures are forth coming as the details are finalized. <b>Rated Power :</b> 4500 x 1 @ 1 ohm 2000 x 1 @ 2 ohms 900 x 1 @ 4 ohms ---- <b>TEST RESULTS SO FAR :</b> 3100 Watts @ 1 ohm nominal rising to 2.67 ohms on 14.4v dropping to 13.6 volts 4650 Wats @ 0.25 ohm nominal rising to 0.71 ohms on 14.4v dropping to 11.6 volts You will get more with a beefier electrical setup <img src="http://www.soundsolutionsaudio.com/forum/style_emoticons/<#EMO_DIR#>/smile.gif" style="vertical-align:middle" emoid="" border="0" alt="smile.gif" /> 5290 Watts @ 1 ohm nominal rising to 2.12 ohms on 17.9 volts (did not measure drop) 6930 Watts @ 0.5 ohm nominal rising to 1.31 ohms on 17.9 volts (did not measure drop)

I don't have any plans to make a sub to handle 5kw daily -- IMO, the suspension would be so stiff it would be incredibly inefficient. I see no reason to use 5kw to do the same thing you can do with 2kw

33mm -- I have a few old motors here and they just barely don't fit.

Re-directs air flow behind the former for better cooling -- a pole vent by itself is not a very effective cooling method. You may notice on the Fi subs the BL and BTL have no pole vents,

Indeed First two built with the plugs - picked up today!

Hmmm... the aluminum may not fit then. If you *really* must have them I can probably get them machined down a bit.

If your motors are not the very first run they will fit. I am assuming if we talked about it they are not that old ?

It will not fit original motors - the pole is a bit too small. We CAN add the plastic plugs to any generation motor and they work quite well anyway as we have used a few 100

Starting today it is standard on all drivers.

Next year spring break ? That may be possible.

Hmmmm...

We have been using a plastic domed pole plug for our cooling option for some time now. I decided to take a new route and these will be shipping as of orders placed today and beyond. They were made down the street here in Troutman, NC Solid aluminum plugs! The shape is a bit more aerodynamic than the old plug as well: Also, being aluminum, the plug itself will soak up some heat.

Hard to say just yet - with pre-orders most orders rush in at the end.

I love that box!

From amp to sub use 12 awg.

They will be - working on the details of that. I couldn't bring myself to make an amp with vertical FETs... just don't like it.

Yep! I have parts coming in with the shipment