sundownz

I am up 0.2 dB so far and I'm not done with the roof yet I am adding a little then metering... adding more... then metering. Just using one NS 15 and one 3000D as my reference system... that way I don't have a ton of stuff in the way of getting around the Jeep.

Two 1500Ds. Stereo Integrity BM 12s - 8 of them. They don't make that model anymore.

Experience seems to vary greatly with deadening... hoping it does well for me in the Jeep, though!

Do it!

Yep - I remember you guys

UPDATED THIS MORNING. If you have contacted me about the SAE-1000Ds before please contact me again... totally lost track of what was going on with those.

For that power level look into two Z15s or one Nightshade.

I pretty much just list them on CA.com due to the traffic - you don't need an account to look

Did you guys have the speakers under the car ?

I am mainly just annoyed that I have to take out so much of the system to get the panels out *laughs*

I use Scosche EFX when possible : http://www.scosche.com/products/sfID1/160/...2/266/sfID3/267

I mean almost impossible to put in and take out -- you can yank the outer part off of the SAX series amps with those if you aren't careful.

Those cables are really too tight for my liking.

LOL I wonder who that was. I dunno... but I heard he is into chickens these days.

I've gotten so many PMs about whatever SAE-1000s I've got left that I have lost track of who wants what... so if you want one and you have already talked to me e-mail me so I can figure it out. There are no more after the pending ones to the guys that have already talked to me.

A bunch - IIRC I hit em' with about 2500 each on a burp. In a proper enclosure they would do much better -- my box has too much port area and is too big for a pair of 12s

Bigjon, I got this Jeep because I traded audio equipment for it It just turned out to work great for SPL. I am using Second Skin Damplifier - the best deadener there is, IMO - not sure how much yet... I have a bulk pack but I'll probably order more.

Not at this time - I may be getting more soon, though. I'll make a new post then.

Indeed Getting them in and out of the box sucks too! *laughs*

I hate deadening but it should pay off Going to have to pull out pretty much everything to get all the plastic panels off.

Uh oh... what is going on here ? Will be working on it some more tomorrow.

Remember you only have 12 more days! There are quite a few people that voted for the pre-order that have NOT put money in.

Depends on your woofer impedance as well.

Pre-Order open as of now - be sure to get these while you can as I think the first run will go quickly. ETA is mid to late June for arrival of these woofers. As always, with a pre-order the ETA is subject to change based on shipping delays, etc, etc. PLEASE do not pre-order unless you are okay with any delays that may occur. Regular MSRP will be $239 dollars - right at our low 200s target Shipped prices in Continental 48 states -- contact me for AK and HI -- USA ONLY pre-order! Paypal me at [email protected] to pre-order. $175 shipped for ONE $330 shipped for TWO $620 shipped for FOUR Ask about more than that. Two of them in my Jeep has done up to 149.7 dB in a box that is too big with too much port area, so they have great SPL potential. Not only that - but they are GREAT sounding drivers with terrific low-end extension. They feature an aluminum shorting ring and a high linear x-max of 19mm one-way. RE: 7.09 ohms (D4 in series) Fs: 28.4 Hz Qes: 0.511 Qms: 5.75 Qts: 0.469 Vas: 40.3 L BL: 25.04 NA Le: 7.7 mH Mms: 252 g BL^2 / RE: 88 600 watts RMS Depth = 6.5" Cut-Out = 10 15/16" Enclosure Suggestions: 1.75 ft^3 ported tuned to 30 Hz -- F3 of 26 Hz * Tune higher for more SPL oriented setup * Enclosure can be as big as 2.25 ft^3 if you stick with the 600 RMS rating 1.00 ft^3 sealed -- F3 of 44 Hz * For SQ and space limited applications

Nightshades are out of stock -- updates will be posted when they are available again.