sundownz

Before anyone asks... it will be 3-4 months for the first "intro" run of Z15s. A bit later on we'll have heavier stock on 12s and 15s.

150.3 seems to be it It didn't damage the sub going up higher on the HU but it starting having erratic motion (jumping the magnetic gap) so I called it a day! So it does let you know to back off before anything bad happens.

I am only doing 3 second burps... where I would let the monster run 8 seconds at a time. Have to be a bit more careful as this is only a "1000-watt" driver

Wow... Z15 for the win. Not quite done testing but I am letting it cool down before continuing. We re-did the amps with 2x 3000Ds as its a D4 sub... so we could get 1 ohm per amp. I also have a 225-amp alternator now. * Less wires now with just two amps * SAE-75.4 prototype along with 2x SAZ-3000Ds * First burp - Volume 20 on HU * Second burp - Volume 21 on HU * Third burp - Volume 22 on HU * Fourth burp - Volume 25 on HU Sub is a bit warm so I'm letting it cool down before continuing... HU goes to 35 and I was burping it there with the Monster sub on the four 1500s. I do not think the Z15 will take the HU on volume 35 but I think it has a LITTLE more in it. Conclusion so far... the Z15 is awesome and the Monster really needed more power

Sounds fine to me. Will you be running a 125.2 AND a 100.4 ?

They sound good up to 200 Hz in our testing.

I have not tried them up that high... simply by inductance they should have some sort of response up to almost 1000 Hz. I'm not sure how clean it is up that high but they should PLAY that high

Yes, rated power is 125 x 2 @ 4 ohms. Pre-Sale runs until the 21st of next month. We are working on other things. Forum search will yield quite a bit of information.

Indeed - for two subs on a 125.2 you would need to run 4 ohm stereo or 8 ohms bridged. Either way is actually plenty of power for the E8s

All of the slopes are 12 dB.

Completely up to you. I prefer active myself.

Send a PP for the shirt and I'll add it to your invoice for the E8s or I could just ship the shirt now.

Congrats guys!

Yes, the 100.2 / 125.2 already does well over 125 watts per channel... it was just absurdly under-rated so we changed the part number. We did upgrade the power supply FETs but that does very little for power output - its just a safety measure to help them from getting taken out by over-current from abuse. If you want to flip the board inside the case you would have to take it apart and drill / tap all kinds of new screw holes inside the case... not a good idea. I'm sure a local vinyl guy could make you a little SAX-100.2 vinyl to put on the other side

They don't have any. Plus they may be embarrassed by the 125.2. Nah They are almost identical except the 125.2 has higher amperage FETs in the power supply and more versatile crossovers.

He has LPF on the amp and an HPF on his head unit.

Yep.

She just moved to a new house on "Sundown Rd" by the way. Best product model ever

They are 8 gauge.

LOUD.

FTW :bigclap:

Topic un-pinned. This information is now available on our site under "Warranty"

THAT is what i wanted to hear. What Mid tweeters are you using? My Omnes BB3.01 only go down to ~400hz and would 2 of those be good with a 125.2, or should i go 100.4 and bridge to 2 channel? He is using Eminence 8s for midrange and Selenium tweeters up top. Two would work well with a 125.2 -- this is what the Bronco has (100.2 actually).

Little behind on the web-site but we posted a little "news" snippet about Jake and Mike and will get their Rides up soon

ETA is the 21st of next month along with the 100.4s and 50.4s