sundownz

Looks really cool having them all spread out

That would work well per sub.

Yep... still toying around with where to take the X series, and what other series to make at what power levels, etc. The system on the third X12 prototype was called DAHCS - but I have developed even better solutions since then. Perhaps I will combine the two into a driver later on Suppose I can say what it stands for now - Dual Aluminum Heat-Sink Cooling System - there was a thick aluminum ring on the top plate and another on top of the pole to absorb a great deal of heat in areas where air moves across the aluminum quite readily.

Welcome to the forum Luis

Package pricing lowered.

Nice flex!

It is not warrantied at 1/2 ohm daily. Many customers do so anyway. Power output is in the mid to high 3000s at 1/2 ohm with 13 to 14 volts depending on actual impedance at test frequency.

Looking good so far For max SPL you should try some Aeroports later on too.

They are going to "ExpoSport" from the SMD forum.

LAST DAY!

Congrats guys! Great showing!

We figured it out - it was the Epicenter.

I'll go out on a limb and say that using an Epicenter, which is capable of 9.5 volts output, and setting the gain to maximum at first probably damaged the input section of the amp. The "max" setting assumes 0.2 volts of input.

They will all be custom, so yes.

I have lots of plans. Not going to say anything yet so I don't get flooded with "ETA?!?!" messages.

Sending PayPal now. Got it

Brian - with 200 watts the relatively low efficiency is not a huge deal, should be fine.

Brian, They would work okay as a midbass up to around 200 Hz - but the efficiency is not as high as you may want for a mid-bass. The 1w/1m rating is pretty low on these as the design was made to get as much SUB bass as possible at the expense of efficiency up higher.

Lets see some SPL numbers Dan! Should be a big improvement from the old sub

My prototype motor is nearing completion @ the factory - so I'll be starting testing on it in the next few weeks!

Someone is going to have fun opening all these!

We need to set you up with one of my monster 80+ pound subs next year when they are ready!

Nice Let us know how it does!

You can burp 6kw on a custom made Nightshade without issue.

Hey, were you able to get these fixed up ?