sundownz

Also... regarding my last message. The design this thread is originally about may still be produced at a later date as it was an excellent design, but the driver that will hold the "E12" designation will be a bit beefier. --- Ricky, The beefier proto is 6.25" deep.

that is actully what i have mine doing. but with the alpine type 6.5 comp and only things that i have a complaint are these: runs warm even with all windows down and backseat down so the wind can hit it. and when i take my monster 402 rca off for whatever reason it takes off the ground sheild for the rca input to. Those Monsters mush be REALLY tight to take off the ground shield. Yes, these guys are a little warm at times - but rarely will they get warm enough to shut off or sustain damage.

I have an updated version in the works. I really like this driver but I am investigating a "beefier" option for the E series -- more akin to a larger version of the E8 that is coming soon.

The ratings are: 100 x 2 @ 4 ohms 200 x 2 @ 2 ohms 400 x 1 @ 4 ohms bridged Figure these are 25% or more underrated (meaning you get 25%+ more power).

10 more days

I know but I was referring to a single sub application. You can use either the 100.2 @ 8 ohms or 1000D @ 2 ohms - either one works pretty well for a single SD-1 v.2 I know...just being picky. Indeed. One of these days I'll have different coil options for em, just not yet.

The SD-1 v.2 10" subwoofer is going on sale! Fantastic dual 4-ohm voice coil USA made driver. MSRP is $229 on these drivers but for the duration of this sale they are available for $150 shipped in the continental 48 states! You won't be able to find another fully USA manufactured driver that is as shallow and performs as well for near that price. Two of these would work nicely with an SAX-100.2 bridged at 4 ohms or an SAE-1000D running at 1 ohm! Paypal me at [email protected] to take advantage of this offer or go to the easy ordering Paypal checkout: http://www.sundownaudio.com/SD-1_v2_Sale.html If you want 4 or more woofers see the following: 4x SD-1 v.2 - $560 shipped 6x SD-1 v.2 - $810 shipped 8x SD-1 v.2 - $1040 shipped The duration of this sale is not yet determined, so act now while you can to get your hands on some of these drivers! If you originally pre-ordered some of these and want more please contact me via e-mail and I will credit you $25 for each one that you pre-ordered towards you order since this price is lower than the pre-sale pricing! ---------- DESCRIPTION: These subs will throw down in very small enclosures and will now handle much more power than the original SD-1. Ideal for shallow truck enclosures! They utilize a single 6" diameter magnet slug to achieve the necessary flux. Behind the cone you will find a progressive roll spider and a special treatment applied to the back of surround and upper lip of the cone to get more stability from the surround and to bring the Mms to where it needed to be. The leads are offset out to the sides and slightly raised to eliminate the possibility for slapping and the motor itself has quite a bit of clearance for the coil thanks to a deeply bumped back plate. These are serious SQ subs in a very shallow and efficient package. Made the in the USA to the highest possible standards to last for many years to come. They come with our 2-year standard limited warranty against defects. They also carry our 5-year discounted replacement policy -- should you be at fault for damage to your speaker you can purchase a new one at a discount if you send back the damaged one. SPECIFICATIONS: Dual 4-ohm impedance 2.5" diameter voice coil Kapton voice coil former 400-watts RMS rated power 12mm linear excursion one-way 4.5" mounting depth Narrow profile foam surround for low Mms and maximum cone area High quality polypropylene cone and dust cap MADE IN USA Qes = 0.437 Qms = 4.545 Qts = 0.399 Fs = 28.77 Hz VAS = 56.92 L Mms = 88 grams Cms = 337 uM/N RE = 7.31 ohms (series) BL = 16.55 N/A (series) Le = 2.13 mH (series)

Last bump for this thread, it is being un-pinned.

Look forward to more feedback!

Sale will be starting TODAY on these. Watch for new sticky post.

what amps did you replace to get 2db gain? or is this a new build? Kevin had two 1500Ds and then used the 3000D -- for some reason, in his setup, the single 3000D was much louder. Normally they are very close in performance.

Let us know how it works out

I know but I was referring to a single sub application. You can use either the 100.2 @ 8 ohms or 1000D @ 2 ohms - either one works pretty well for a single SD-1 v.2

Indeed... couple of guys swung by here yesterday to test 3000s in their setup. We were getting about 2550 watts with a 1 ohm load and a rise to 3 ohm with 14.4 volt dropping to 12.8 volts.

That sucks! I'm glad the box got stuck in the opening and didn't keep moving, though!

Yes, the 3000D high voltage test is also sticky up top.

Correct.

Yes, it has happened fairly often.

They are all dual-4 ohm -- meaning you can get 4 ohms (100.2) or 1 ohm (1000D) with two.

I'll throw in a full warranty on your used one for 2 years to make up for it!

Yep, extremely low price -- limited offer until the 20th just like the SAX-100.2 sale!

New items added regarding warranty.

http://www.db-r.com/sell/store/index.php?productID=144 I have authorized Chris to sell SAX-100.4 refurbs for $275 until the 20th of April to mirror my sale on the SAX-100.2 models! Get them while you can! Chris offers a 1-year warranty on his refurbs through db-r as well!

I'll look into it. --- So, any interest in a sale on the SD-1 v.2 model? Any love?

Great score! Congrats