sundownz

Is the sub no longer performing well ? Occasionally there may be excess glue that pulls off of the inner-most spider roll that is not actually a tear of any kind.

12v testing Not sure that I ended up posting or doing 16v testing or not... sure some customers have, though.

Expected to complete at our factory on June 20th -- so ETA will be July 20th to 31st. I'll run pre-ordering until July 5th.

Shoot me an email.

The parts are in stock; I still keep quite a few v.1 coils around -- but we will have to assemble them.

is it soon yet? lol! Customs liked it so much they held it for about 11 days -- but it's almost here

I have it in the first thread :drink40:

You should have the new one soon.

The frame is different -- they are otherwise compatible.

Since we have been out so long I decided to open pre-ordering for the month of June -- they are due in July with the specific ETA still being up in the air. I will post when I get a better date within July. I will run this for the month of June and maybe a little bit into July depending on the specific date of arrival. This run features all the updates so far on the 8s AND the new style frame: This frame has superior clearances and is actually a bit easier to get in the hole with large speaker wires. A win-win all in all The magnet boot IS still included -- the frame pic is just a bit older. ----- PRICING : 1x SA-8 = $119 2x SA-8 = $109 each 4x or more SA-8 = $99 each Shipped in continental 48 states cost. Paypal to [email protected] -- MUST SPECIFY D2 or D4 coils ! You can also order from your favorite online or local dealer to receive the pre-order pricing.

Don't forget about these guys -- we are sold out of SA-8s but Mike still has them. He is on the road for work on and off but be patient for a good deal

I miss this type of thing... we used to talk about things like this all the time online in 2001-2003 or so Ah, the memories! Trying to bring some of it back when I can.

We used a pretty small motor for this discussion... 120mm OD magnet utilized. When I made enough room for the sleeve we dropped off 34% of the motor force factor (BL^2/RE) -- in order to get this back the magnet had to go all the way up to 150mm OD and in turn the back and top plate OD both had to expand as well. So much more steel and much more magnet. 634g magnet to a 1109g magnet -- we had to gain 75% magnet mass. Total motor went from 1890g to 3112g -- so a 65% gain overall in mass not counting mass added by the sleeve. So it is fairly significant in terms of cost to get a highly functional sleeve and to "gain back" the desired motor force lost by making room for it. And again, if this pans out for the target cost of the driver these thick sleeves do work great.

* SA motor -- the top aluminum piece acts as a pole cap ring. * The brass piece is a magnet ID ring from a Z v.2 motor. This goes around the inside of the magnets below the top plate / above the back plate. It is sitting on the SA motor simply for reference purposes. * Acoustic Elegance drivers with pole sleeve shorting rings

This thin sleeve has a nice effect at rest and on rear-ward -- seems to lose effect combined with the magnet ID ring, though, as that is equal to the magnet ID ring only. ----- So now lets do a thick sleeve : Full 1.0mm thick -- and the effect is MUCH better and also alleviates the issue of being cancelled out by the magnet ID ring. The only problem is you need to add more motor to compensate for this type of sleeve as it widens the gap a good bit -- for this example the pole had to go down from 35.7mm OD to 33.7mm OD to fit this sleeve. If the design budget allows for this then no problem -- the issue you end up with is spending more money on the motor by adding magnet to it. The benefit is that the sleeve is the most linear method simulated -- the Le curve is completely flat in this case. In most cases price to performance the magnet ID ring would be a better selection unless you are going for ultimate reference level.

I suggest sticking to the v.1 coil in the v.1 motor.

The newest revision has two -- older ones have one on top of the pole. Cool beans. Was just curious as I was honestly a little surprised at the symmetry and linearity of the Le curve. Looks like pretty nice results overall. Indeed -- the dual shorting rings made for a very nice Le curve What can I say... I was more of an SQ guy before entering the business

I have had quite a few inquiries on a strong 6.5" woofer... we'll have to see.

The spacer on the SA is not a shorting ring -- the one on the Z v.2 initially was a shorting ring as it was a conductive material. Nuts on top of the frame are simply for ventilation and are not a shorting ring.

People ask me this alot... the short answer is that they make the speaker better. The long answer can be shown on some graphs. This graph shows inductance over excursion for a basic motor design. The center is at rest, left is rear stroke, and right is forward stroke. Why is the graph shaped this way ? Have you ever looked at inductors for a crossover ? You can get a high value in a small package with an iron core. So... what is a speaker motor ? A partially iron core inductor! As the coil moves back it gets more iron in the core! So the inductance rises. As it moves forward it gets more air in the core so it drops. Pretty cool, huh ? Now... the field can be absorbed by a conductive material in or around the coil -- so shorting rings come into play. One approach, which we use on the SA series and NS v.2 series, is a pole cap shorting ring -- note how it reduces forward inductance and at rest inductance. But not much in the way of rearward... Well the NS v.2 and Z v.2 both have a large magnet ID ring -- notice the huge effect on rearward inductance and at-rest inductance ? As a note... the SA will also have this ring shortly too. Now... having BOTH rings like the NS v.2 has now and the SA will have soon... huge effect across the board! Not only is the inductance more linear but it is much much lower. Why is this good ? 1) More power delivery to the coil as inductance causes "rise" 2) Less distortion -- inductive distortion is odd order and unpleasant; although a fairly small part of total distortion. 3) More high-end extension as inductance is a 6dB per octave low-pass crossover. 4) These rings also act as heat-sinks; although this effect is not a large reason to use them in and of itself. Can a speaker sound good without them ? Sure! Many great sounding speakers don't use them and they are pretty expensive too so don't always represent a good price to performance ratio. I do not plan to use magnet ID rings on lines less expensive than the SA series, for example, as the ring represents such a high % of the total cost of the speaker at that point (large chunk of aluminum, copper, or brass). But they do have benefits and I figured some of you might like to know what those are.

The newest revision has two -- older ones have one on top of the pole.

Looks good Dave !

A re-cone kit is the cone, spider, coil, and triple joint ring glued together.

You can get a D4 re-cone -- all prices are listed here : If you are not comfortable doing a re-cone you can ship it to us to do it.

Too much excursion -- gain position does not tell us the power or even % of power coming from the amp. In the end too much was applied to the driver in a relatively large box size (way too big for a 1500-watt amp), mechanical limits were exceeded, and the ring was shattered. You will need a re-cone and I'd suggest a smaller enclosure if you plan to keep the amp / sub combo.