sundownz

Threw some good power on it today and hit 155.9 dB -- really close to the v.1 box results but this is with a Z v.2 =) Now to try an NS v.2 18 in here when they arrive !

If you still need anything please email me -- I rarely do venture out of the Sundown section.

If you find a used one... or if you get a motor we can still make drop-ins. When are you going to release the nightshade V2's? Have you worked out the issues with the SA 15's? NS v.2s are a few weeks out. SA-15 design is done... final cone was produced... etc. Just a matter of time to start production.

At 1 ohm with two subs... no problem.

Indeed... sold out and discontinued. As Derricks stated I will have around 20 of them slightly used ones 2500s come in from the Team.

You can call and order the brass threaded rod, nuts, and washers from the same place I get them (they are local to me so I pick up): Piedmont Fastener Co‎812 South Main Street, Troutman, NC 28166-8514(704) 528-6150‎

If you find a used one... or if you get a motor we can still make drop-ins.

Only a few days left to take advantage of this sale !

4500s made it an hour or so ago... starting to ship today and will finish by Friday.

Available. Not doing pre-sale.

I'm ready Should just be a few more weeks !

At what impedance ? v.1 or v.2 ? What size ? Enclosure size ?

Can't do it -- won't fit under the window line. I haven't noticed any flex on it either.

Will go quick... especially as the date gets closer.

ETA is still end of month to early June.

Maybe ?

Amps will be done in two days... around a month early (they are on the ball) -- so I now expect these late JUNE instead of July. Therefore pre-ordering will end sooner... around June 20th.

Amps will be done in two days... around a month early (they are on the ball) -- so I now expect these late JUNE instead of July. Therefore pre-ordering will end sooner... around June 20th.

It is a good bit more powerful - especially when wire down low for SPL competition usage.

Would power a BTL nicely.

I actually have a tracking # for the truck now -- called them up this morning and they are in South Carolina today so 99% likely I will get them tomorrow.

I will when dust cap is done drying.

D2 coils / 3 Hard 10" Spiders (PSI) / Nightshade Cone * Starting rear part of spider glue joint * Finished up * Extra glue bead around the perimeter of the spider * Another shot. * CA glue covering all the exposed former wrap material as well as bottom of cone joint. * Top triple joint Dust cap is a simple plain black poly cap. Sub performs quite well free air on our 1500D on the bench - looks like this beast would handle a ton more power mechanically and thermally

Swapped to a 2 spider Z v.2 and found my frequency is actually 54 hz with this box : 920 watts = 148.6 1210 watts = 149.3 1510 watts = 150.1 * Sub cool down for 10 minutes * 1890 watts = 150.9 2570 watts = 152.2 2940 watts = 152.4 * Sub cool down for 10 minutes * 3320 watts = 153.0 3650 watts = 153.1 * Sub cool down for 10 minutes * 3850 watts = 153.4 So... SPL per watt is up now. Tried a few things to get my peak back to 53 hz with no luck yet.