sundownz

Windshield cracked from a burp... and another burp to finish it off.

I suggest simply upgrading the under-hood battery to the best XS Power or Stinger AGM battery that will fit. Otherwise you should be fine.

I won't have specs for them until I build them -- the parts are different from the T3 originals.

My parts won't fit the T3 10" frame... but I can probably drill out another frame to work... same for the 12"

When I have updates I will post them

Had a 1500D @ 1 ohm a few HU clicks into clipping (I push the amp into clipping a bit to simulate what someone will do to the sub in their car). I'll sell em for around 250 or so built.

Update about the meter from another Russian customer : "It's Russian TL analog, we call it "datcheg-2". Difference with the TL no more than 0,1 dB."

Little video playing :

I wouldn't bother to deaden the inside of the box.

http://smotri.com/video/view/?id=u148733920d6 Check it out -- not bad ! He has a 1200D on the sub @ 1 ohm.

SOLD OUT

I may have a buyer for this one already -- but I can make another one once I get more coils in stock.

Hey guys -- I am behind on emails... not ignoring anyway... will take me several more business days to catch up.

1500+ watts I'd say... motor has good cooling + the stiff NS v.1 suspension

Yes.

Was hoping I could use the stock frame and I was able to do so! Just had to adapt it a bit... one of our spider bolt down rings worked perfectly for the job. This woofer has 3 Hard Nightshade spiders, a Z v.2 prototype D2 coil (tight gap so NS coil would not fit), and a light weight cone similar to the Z v.1 but with a wide roll surround. Once the dust cap glue dries I'll measure specs on it to see what we got * Steel spider ring glued into place (glue under, around, and below the ring) * Overview of the ring -- also changed original basket screws to a higher grade metal with allen heads. * Gluing bottom triple joint * Lining it up and getting ready to solder the leads -- 6 sheets of paper on the inside gap * Finished product ! I've played it on the test bench a bit with no dust cap... but that is it so far.

Lets call it $75 shipped in the continental USA each... they are getting low so if you want them you gotta get em now.

Waiting on a final cone sample... then I will probably start this soon after.

I really have no idea how much I can get out of them on my electrical system. If I had unlimited electrical it would be over 20,000 watts -- but I only have six batteries. Chances are I only saw 11-11.5kw so far on the one sub as I saw it wasn't getting any louder. I was able to clamp the 156.1 power on the two 4500s and it was right over 10kw.

Good luck !

My "magic box" for one 15" falls into SS-NW in dB Drag and a Modified class in MECA.

I'm really not that impressed with how the AP amps are put together... I've had samples of everything that factory puts out since 2006 and none of it compares in quality to what I'm selling. If it did I'd be selling it since it is ALOT cheaper to make.

Sean "ibanender" has sold a few of his 2000s on e-bay -- that he got from me in a trade.

I threw the 3500s in but 156.1 is the best score I can get -- sub cannot move any farther.

The tinsels are just like the SA-12... flat tied down wire. The coil is 2" diameter. Spider is this (two of them) :