sundownz

We rotated the box a bit and got it up some : I don't think this huge 30" long port is really optimal... but we just modified one of the other boxes to give it a shot.

Not sure yet.

MECA Style metering results so far (this is done at the passenger head rest with driver door open): We had a 143.2 but I didn't get a picture. Going to try some other frequencies later... that was the peak on the dash (37 Hz)... we haven't tried others yet.

Yep - 37 hz on paper tuning. Seems to peak lower in-car than that.

Low tuned SA-8 on music : We didn't have anyone with long hair around... so we used paper.

Low tuned SA-8 on music :

Not yet -- the only stuff we have shown from his CRX so far was the high tuned box. Today we will gather some information from the low tuned box.

Not really... I'm at the shop now... Sean and I are doing some testing.

The SAE-1200D is a good bit more powerful than the AQ-1200D.

I had been running 12-volts for a while since I took the 16v out last time... basically seeing what I could do on 12v. Now that I feel like I maxed that out I went back to 16v.

The Z v.2 and NS v.2 are not yet available. We have the Z v.1 on close-out sale and the SA-12s are shipping now... with SA-8s on pre-sale.

Sean has done some in his CRX -- he is quite happy with it.

I may or may not be at the limits of the sub yet -- if the four 3500s don't get any louder then the sub simply cannot be forced to move any farther, period *laughs* If that is the case it will probably take a Neo driver of some kind to get me louder than I am now (that could inspire me to work on my Neo).

I may also just throw four 3500s in there at 0.5 each -- that could do it

UPDATE: I have moved to 16v but still around the same score... figuring out why. My impedance rise is insanely low with the D1 coils and the amps at 0.25 each... I may need to use D2 coils *laughs* 0.25 actual DCR per amplifier with a rise to 0.8 per amplifier -- little on the low side! When I kick it one more click past the 155.9 - 156.0 level the amps get protect happy. I need to re-build with a D2 which would give me 0.45 per amp actual DCR and should net 1.44 per amplifier... which based on earlier testing can still give me around 14,000 watts from the pair of 4500s on 18v.

If you are at least somewhat responsible with them they will be fine.

The 1200s can do 1500+

IMO... they would sound very good.

Good news

Honestly... the SAE-1200D would stomp a mud hole up and down the JL 1000/1 in power output wired @ 1 ohm. Not to say the JL isn't a nice amp -- JL makes a very nice product.

The design is very similar to the other size SA drivers -- which people love the sound of. They will sound quite good. Tuned that low will yield a very deep response.

Thanks all

They are 12v -- I put my XS Power D1000s back in for 16v. These D1000s are troopers... 2 of them are 5-7 years old, another 2 are 3-4 years old, and the other two are 2-3 years old... and all of them hold a charge like new.

We can get together with Derrick on it as DJ stated

Looks good !