Kangaroux

Godsmack is selling me his D2 xcon 18 for $275 + shipping. I'm covering the shipping label since I get a UPS discount and I'll be sending it to him tomorrow. The sub is in full working order with no rips or tears in the surround and is "still tight as hell"

I think he means he wants to be loud enough that everything flexes... OP if you wanna move some air tune a little lower to like 32-33. Dropping your tuning slightly won't suddenly make it any louder though. If you wanna move some air get some more 15's or step up to some obsidians 18's (which are on preorder right now for 170 each) Being loud has no relation to flex? Flex is a tell-tale sign of the in absense of proper research and install. You do NOT want flex. Also, to move some "air", you don't need larger drivers, nor does he need to shop for equipment based on price, which you are insinuating by your last statement. OP, I would not recommend tuning so high, I would shoot for around 35 at the most, if your wanting to go that high, other wise, stick to recommended specs, which I believe are aroun 32hz. It can take many attempts to achieve what your looking for. First thing I would do, is maybe upgrade to larger drivers, not nessecasrly in size, and/or power, and go from there, you may not even need to build another enclosure. good luck I know flex is bad. I was trying to reword it in a way that would make more sense and probably give everyone a better understanding of what the OP wants. And secondly, you don't NEED larger drivers to move air, but if he wants to go from 35hz down to 32-33hz that isn't going to make a big enough difference to suddenly turn his vehicle into a wind tunnel. When it comes to moving, there's no replacement for displacement. Larger cone area is the easiest way to get more air moving, and the obsidians/sa's are basically on the same level in terms of power handling, so it's not like the OP would be making a bad move to switch up to the 18's (he wouldn't need more power for them so to speak). I don't want this to turn into a pissing match, but I hope I at least cleared a bit of that up.

Can you use WINE to operate the windows software on the computer?

I think he means he wants to be loud enough that everything flexes... OP if you wanna move some air tune a little lower to like 32-33. Dropping your tuning slightly won't suddenly make it any louder though. If you wanna move some air get some more 15's or step up to some obsidians 18's (which are on preorder right now for 170 each)

ttt

Email me: [email protected]

Nice sub but no thanks, really would just like an xcon/zcon

Haven't drained the battery since I barely put any use on it. I would assume it lasts longer than my 12v considering the battery alone weighs nearly as much as my whole 12v drill with the battery in it lol.

Viewing it is perfectly fine, just make sure no one catches you lol

Congratulations

Item(s) for Sale: ^^^ Item(s) Description/Condition: 10/10 mechanical 9/10 cosmetic (it looks pretty much new, the color has faded a bit and that's about the extent of it) This drill is very powerful and I would love to keep it but I need to finish buying up some things for my build, plus I already own a 12v so I can still get by. Probably my favorite feature of this is that the chuck doesn't have 2 parts to it, it's just one moving piece and there is a mechanism inside that locks the chuck when it feels a drill bit. The locking is actually very tight and it makes it way easier to switch between bits because you dont have to hold on to the chuck and rope burn yourself. Comes with the case, drill, charger and a new battery. Price: The newer sets of these go for $200 new. How about $100 shipped, no trades Shipping and Miscellaneous Item Information: UPS ground Item Pictures: (List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

Wait, was this used or did you buy that direct from Fi? Either way that packaging is horrid. I just shipped my hdc3 18 today and packed that thing with so much paper, foam and peanuts. It's not going anywhere lol

Looking for an 18" xcon. Must be working 100%. Cosmetics aren't THAT big of a deal but I don't want something that looks like crap. I would like to get a dual 2

Toast

Definitely sounds like you got a bad batch OP. I used the 60 mil B-stock and applied it in 40 degree weather and it's held up perfectly for me. I'm not gonna bash anyone for their opinions, nor am I going to comment on any of what Coleman has said or done. But I will say this: in my honest opinion, Coleman jumped into the industry too fast. While I applaud him for his perseverance and dedication to starting AT from the bottom up, his communication skills aren't there yet. Prime example being his reaction to SSA's rejection of buying the XS wire.

Make some offers on this Alpine people! Looking for a dual slug fi q motor!

I know someone wants this alpine

ttt

Subwoofer sold on ca.com

ttt and proof of ownership:

ttt here are some coil readings and proof of ownership as well:

ttt

ttt

Item(s) for Sale: ^^^^ Item(s) Description/Condition: 8/10 condition, 10/10 mechanical. The amp is missing the end caps and has some light wear on the top but other than that this thing is in great condition. Amp works 100%. Bought it off a local and he hooked it up for me to see. Started up with no issues and played fine. Rated at 600w @ 4 and 1000w @ 2. Has 100A of fusing. Price: Let's start this at $200 + ship. I'm in no hurry to sell this so feel free to offer up. Only trades I am interested in would be an older Fi Q motor (dual slug) + cash. Shipping and Miscellaneous Item Information: UPS 3 day ground. Item Pictures: (List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)). Before anyone asks, there is what looks like a purple sharpie marking on top of one of the caps. It is NOT blown

Item(s) for Sale: ^^^^ Item(s) Description/Condition: Mechanically, this sub is a 10/10. There is no coil rub, voice coil rests at 1.5 per side (I assume Fi uses dual 2 coils that rest at 1.4). For condition the sub is a 8.5/10 because of it being used and broken in, and also a minor scuff on the surround. The scuff doesn't not go all the way through and is just a small mark. This is the older model Q with the dual slug motor and comes with the cooling option. Price: $190 + ship firm, I am not willing to change the price. The ONLY THING I am interested in for trades is a Fi Q motor like this with the dual slugs. Please do not ask me if I need anything else, because I am all set lol. Shipping and Miscellaneous Item Information: Shipped via UPS 3 day. You pay shipping. Only reason I am selling this is because I got it in a trade and I have no use for it since it's a 15 and I have an 18. Item Pictures: (List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)). If you want any more pics just let me know. You can see the scuff on the first picture off to the left side of the sub