denalilvr

fear the pup man, fear the pup

been there done that bro..just go straight to the admins if you really want to get something done.

ya i think i have enough..has of right now i got 69 feet of 0 guage actually not the 60 feet i thought i had..

i did that i came up with about 32 feet..but i just want to make sure there will be no surprises..

thanx guys..i feel so stupid didnt even think of the batteries that im spending $1k on..lol

great to hear

so you guys are saying i need more then 60 feet?

i see camel toe

your system will consist of 8 of the 15k rockford amps? or you where saying in total it will be 8-15k rms?

cause its a rip off..lol a 50 foot spool cost $250 i am getting these kits for $85 shipped 3 kits will give me 60 feet of the 0 guage not to mention a load of everyone else for only $5 more

heres the situation..from my battery under the hood to the back of my truck is about 10 feet..but im giving a extra 3 feet better to have more then less..and im also running 2 batteries under the hood with 2 batteries in the back..now keep in mind i have never installed my own stuff ive always had people i know and trust do it..so im just buying the wires for them..so by my calculations i should need somewhere around 25-30 feet of 0 guage wire to fulfill this project? by the way the 2 batteries in front will be about 4 feet apart from each other..1 on each side and in the back the other 2 batteries will be next to each other.and there will be 2 amps back there has well..currently i have 60 feet of 0 guage kicker wire..

yes but you need to have the secret decoder ring to find it..

no this question has nothing to do with subs..lol..im just trying to understand those numbers..

bigjon you have said too much already..anymore and we may have to have you...."erased"

in the sticky where they did a test this is what was read Power supply voltage was 16.5 volts at rest dropping to around 14.5 volts. So consider this a 14.5 volt output rating. Our clamp meter ran out of steam at 400 amps so we measured efficiency at lower levels: 3294 watts @ 84% efficiency (252 amps draw) 3938 watts @ 81% efficiency (316 amps draw) 4424 watts @ 74% efficiency (392 amps draw) here is my question and i want to get a better understanding of this so bear with me for a minute..lol 3294 watts with 252 amps draw..now lets say your running 2 of the 3k watt models which would be 504 amps draw? and if your alt is only a 300 amp alt how does that work? im sure i have something wrong but this is the stuff that keeps me up at night..lol

this forum only has 1 brand ssa fi is different and has nothing to do with ssa

no problem, im trying to figure out how much of what im running and then i'll order a few more i got 3 so far..

yes its shipped for $85

for a full size truck i think you need a minimum of 300sq ft..ant the owner of second skin told me to start around 360sqft that should be enough to do 2 layers all over the truck..

ya im using boston acoustics pro 60 models http://www.woofersetc.com/index.cfm?fuseac...Product_ID=1078

i have a denali and im using 200sq ft of damp pro and 160 sq ft of damp regular..im doubling up on the roof and the back cabin and doing single layers on the 4 doors..

lol noob..i love that word..i should get it on my plates..lol

you are going to use a ho alt right? because your stock alt will chit it self when it has to deal with your factory battery plus another 3-4 batteries on top of that..

looks great man..

can someone please tell me what these cost? i always just see the price or $959 but never saw anyone post the real price..