ChrisAnglin

ILL BE CONTINUING ON MY BOX TODAY!

I have to have my way with the bass at all times ( Sorta feel like I relate to kryptonitewhite) , But this is the prefab box that I immediately drilled holes into then slammed in my trunk with my Crescendo 2000D at 2 ohms. 1100rms assuming my voltage could be better! I bought a 12V Shuriken Bat...Its good, along with my stocky But I really want a 16Volt battery, And Thats what I'll get next. I f I get the mullah. Heres some pics of my Current home Audio setup, Its loud in hear! never had door flex before... Only running 8G power and ground, I have 0/1 in the whip. this is my Home audio / MAkeshft 6th order bandpass I believe... Correct me if Im wrong, But ya with an SA-10 its pretty rad.

Okay I have to Build A T_LINE JUST TO SEE WHAT WILL HAPPEN, I know these 10's hit hard, so Im gonna build a BIG huge ported box that will blow my friends away. maybe scare them. Or even better scare myself. This is what the 4th Order will look like. Im building that first.

I got RAM-Design To make my Box Design 4TH Order Bandpass, AND ITS SICK NESS! tuned TO 49 Hz. It should give me a very good low extension. I realize 10's can only do so much, But thats what I'm going for! I'll buy another battery here in a few weeks. I NEED A 4 channel amp that will push (6) Midrange 5.25's, (2) Mid-bass 5.25's and (2) Tweeters. Also Do you think it will be much cleaner with 2 Amps on mids highs.

I'm very Excited I will be Starting my Build Thread here tommarow! Thank you very very much RAM-Designs, Its gonna Blow ma car down.

Actually RAM D I'd you to build me a box design for SUPER LOW end, and plenty of port area, I like alot of port area. And bracing. FOr 2 SA-10's I want a 4th order Tuned to about 42 Hz, assuming this would still smash on the low notes, the LOWWW notes. I have my subs here in front of me breaking in sorta, they will need lots of time for that i guess. NO SCUFFS OR ANYTHING..... WOW guys thanks a billion....!!!! And whats up with photo bucket It wont let me do anything I got PICS!

Since you have 3 10's you should try to fit a but load of port area into your available space. should be efficient, and low, and clean. and lots of port area lets (ME) tune my box currently very easily with different sizes restricting the open area of 7.5 x 10.5 witch is nice and has 0 port noise. at 48" long with box at 1.8 cubes the tuning is 42 hz and it hits lows very very well. clean as a whistle. depending on how much room you have ( trunk space etc.) you should go for a huge , stunning port. with about 2 cubes of box volume. per sub.

and the shuriken bt-80, got some 8awg running my head unit... sounds great! On 1 mid 1 tweeter no x-over, and 1 12" Soundstream Rubicon making lots of bass, in 6th order makeshift wall in my closet.lol, hits nice in my room, right at my headboard is the loudest point on the room... cant wait to throw a sundown sa-8 in there... Also im slowing this song now with wavepad editor...http://www.youtube.com/watch?v=8gyLR4NfMiI&NR=1&feature=fvwp and wow 56 milluion views, i mean i like the song alot too, but wow that's a lots a cash headin towards breezy, he better buy some Sundown amps and subs, and get 4 runs of 0 and and all Kicker 0G unless theres better like Cadence 0G, or Knuconcepts, or etc. Im not personally familiar with all brands. ALSO ANYONE KNOW HOW TO BASS BOOST A SONG ...Software..? Like decafs.. And also how can make my intro Start fast then switch to slowed with a rapid "swonk" and then its just slowed like bone thugs CnS album greatest hits by DJ Michael watts ....

that in a Breef Estimate will look something like this....

WHAT DO YOU YALL THINK? YALL BUILD SHIT!

Thank you very much sir! I am thinking of sealing my trunk entirely so that no pressure can escape through. I need to get pics up here before people think I'm lying! I can Take SOME PICS , it'l be teasers but its something. MY GRS 5-pf 5.25's from Partsexpress.com LOVE EM!!!! lol 7.5/5 stars for like 5.00 a piece

CUSTOM CUSTOM CUSTOM....ONLY WAY IT SOULD BE DONE...OTHERWISE YOUR DOING NOTHING.

Well Does THUMPER Have a Dual 10 Low tuned( 27-31HZ) Enclosure for $100.00 Total price.

SWEET, That's a good start to a big, Nice, BTL Box. What's the tuning plan for this one? And also are these not som of the baddest subs made? I feel they are.

a 4th order vented is not a bandpass? Thats news to me thanks. Well I can do A 4th order vented with this and the port turns out to be really big, just how I like it. This can be put in a alternative spot so that the box sits right behind the back seat area, Subs hidden, Slot port firing into cabin...

HEHE I gotta work On my Frequency Lingo... I meant More like I click to track Called "25HZ" And then turn the gain up, and My whole car should be exploding with sound, SPL, and air flow. I should be able to Feel( Not hear) this 25Hz... LOL thanks for that though you are right. So I found a 4th order band-pass Calculator that got me a nice cut sheet that I can for almost sure work with. 15TALL x 33WIDE x 20 DEEP If im using the http://dbdynamixaudio.com/4th-order-bandpass-enclosure-calculator/ calculator Does the spec given HAVE TO BE EXACT, or can I go bigger so i have more port area, and box area, SO its as LOUD as it can be. I want to build a box that will go against the back seat of a 03 Dodge Intrepid. In the trunk with the trunk sealed with the back seats in the car...Maybe taken out ...Maybe a wall trunk design 4th order that will fire the port ino the car from the trunk area, but sealed off completely so there's a MDF wall with a port facing in. Ohh a mini trunk wall. Is this a good plan?

OH MA GOSH... YOU MAKE ME SO PROUD TO BE AMERICAN, AND A BASS-HEAD... SUNDOWN FTW Anyone ever tell you that...? You get sundown if your serious about car audio.. I am so glad to be a customer!

WHAT IS THAt DELICIOUS WOOFER ON YOUR AVTR PIC? looks custom and chrome.

Brass Sounds good to me, Least resistance means most Flow of wattage to the subs, And the Cleanest lowest Distorion you can get, I will be using Terminal Bolts and lugs as well. Brass Seems a good conductor. Good thread topic too. Anyone verify what's the best Metal for this?

That sounds like a very good idea... 4th order it is . I was thinking the T line woould be HUGE, but I also want lots of port area. So A sealed chamber at What size would be best for SA-10's... And also How much bracing do I need for 2 SA-10's. I dont want box flex..Or rattle, But ya 4th order does sound awesome. I can Design One But Dont know Demensions For A specific tuning. I want a very solid, Impressive 10Hz-36Hz Bass output. And not much mid output, Dont like buzzing bass, And my mids will do fine with that spectrum. Amp and subs should be here in 4 days.... Fresh BC2000D Right of the minds at Crescendo. My new baby should have me smooth sailin.... Until the haters/thirfs see it... I cant wait, I feel like I can smell the subs, and Hear them. I think I want to do 2 Cu ft. Sealed

I have researched for like 8 months strait sitting, listening, driving, sampling... Im gonna have a small system guys, (2) 6" Midrange in each door, (2) Selenium $20.00 super tweeters per door, On a Sundown 175.4 at 2 ohms per channel. With a nice EQ, It should be enough for me and my friends witch is what Im going for. I want to be LOUD in the vocals, and SMOOTH AND PRESENTABLE WITH THE BASS OUTPUT. I may add (2) More 10's or maybe switch to 15's AND YES I will Have 8" mid-bass in the doors, maybe 10" AND yes it will sound Clean AND loud. When I say SQ I mean LOUD SQ. VERy NICE SOLID, RE-In-forced sound. What I need help with is the calculation for a dual 10's T-line specific to SA-10's , Over-kill.... I dont think so... There more like not super tweeters, and (1) Mid in each door, even seleniums, Dont get loud enough for me when I'm trying to get in the mood. SUMMER....SPL....SQ...T LINE...SUNDOWN...CRESCENDO... i know 2150w rms is more than enough for a t line design, I know Its louder than some like it, Who cares? lol, Im here with a question about T-lines, not what I LIKE in MY car!!!!

THANKS GUYS! LOL....

Ordered The SA-10 D4's and there on the way Along with a Crescendo BC2000D, and some Shuriken BT-80's And Kicker 0AWG. Cant Wait!

I ordered (2) SA-10 D4's And a Crescendo BC2000D And A few Shuriken BT-80's, and Some Kicker 0Gauge wire. I NEED A T-line Design For (2) SA-10's please. Or A 4th Order, ORRR A 26Hz Tuning With LOTS of port area Near full potential.