Smartass

The Canadian ones take a little longer as they goto our US warehouse and then we clear them and then send them out.

No sorry they are complete kits, but may aswell get the kit use what you need and then your left with a ton of parts that you may be able to sell and recoupe the cost of the kit.

Dude you need to splash this everywhere and use the Itrader system over on CCA. I would also call the police OPP and all you guys report it.

Thats sweet, I love the old Crunch gear had 2 including one of the CR50SHC

The problem with obtaining a high excursion woofer and running it with 300Watts is this. Most SPL high excursion woofers are high powered and stiff to handle abuse. And 300Watts will hardly impress you if it does not move the woofer much. I agree with the guys try a MAW-12 it has softer suspension then that of a High Excursion sub and moves well with that type of power. Mark please correct me if im off. thanks

Correct sir and the RCA's are $8.50usd Thanks

I talked to Jacob and asked him if I can let you guys in on a purchase of 0 gauge amp power kits. It has everything you need to wire those beefy 1500's here is what the kit includes: 20ft power wire - 0 Gauge 4ft ground wire - 0 Gauge 8ft power wire - 4ga 8ft ground wire - 4ga ANL fuse holder w/ 250 amp fuse 1 - fuse block - 1x0ga - 2x4/8ga w/ 2-80 amp fuses 1 - ground block - 1x0ga - 2x4/8ga 1 - battery terminal - 1x0ga, 1x4ga, 2x8ga 1 - ground terminal - 0ga Various terminals and installation accessories (Writing on fuse blocks are stickers and can be removed) We are selling them for $121.50cdn plus an extra $10cdn for shipping to the US Paypal is accepted. These kits have everything needed. If you also need RCA cable we have bulk Twisted Pair Blue 17' RCA cables at $10cdn as well. All proceeds will be used in purchasing Sundown gear as well. I have 13 kits and then they are gone. Retail was $249cdn Thanks Jake

Agreed thats where I was heading.

How much power was your Belle the 1100?

1 x SAE1000D $325cdn 2 x SAE1000D $585cdn Regular Retail $499cdn each

^^^ Totally agree

I think that might be a good idea, as people don't mind paying for amps and subs but don't know what it takes to power them and always want to do the wiring as cheap as possible. This way if they go 4 gauge then 1 ohm is doable. But if you rate it at .5phm and they expect it, they will still use 4 gauge power. Like stated about, some people "New DIY's" will run with the bare minimum and if it reduces returns and RMA's then I would in a heartbeat. The people that are truely serious and understand all aspects will use zero and a second batt. But keep in mind the SPL market is only 8-10% of the total share. So I say you are right for doing it.

That looks awsome Jacob, well done man.

Any idea of end user cost Mark? What will it be rated at? And you also said that it was louder then all of the 12" drivers on the test except for two. Was that test using the same enclosures for all the subs and was it Termlabed? Thanks

One of the problems is you need a logo that is vinyl, silk screen and print friendly. When you get into printing multi colours and more 2-5 different setups for printing it becomes costly.

He is running both sets in his front doors I assume. If not then yes your correct a 4ch may work better for fading purposes. However if his idea was to put them in all door they are fairly close together and fade may not do to much anyways.

Sorry dude lol

Or he must love his mother very much to let them go

37hz on that one

BTW ///M5 who was the chick in that pic in your sig?

Any word on power specs and then what they would handle outside of the specs?

Looks killer dude, cool box

Well those comps are 4 ohm final load, 200Wmax and 50Wrms. So they should have plenty at 100Wrms each set. I would run one Sundown SAX100.2 at 2ohm stereo and bridge two sets in each door while running one channel to each. This will give you 200Wrms+ to each door aand plenty of head room. By using a SAX100.4 you never really allow the amp to get to the full potential.

Not to mention the allen type screws tend to strip and get damaged quicker. My vote goes to the screw terminals.