Everything posted by lee
- SSF filter
-
BL 10s
I'm sure it'll handle it fine, all day pounding might have issues
-
Future Amplifiers
They look great! My only opinion is to have even length heasink fins on the sides.
-
Back in stock!
I think I'm going to have to get a 1500 now, then get the 2000 when it comes out.
-
Will aprils batch of 1500s be in soon?
Curious as to if there was a push back on time or date.
-
SAZ 2000d to come after 5k?
It's going to be hard getting used to all these new amps coming out. Bang for the buck will come by way of the "SAE" line, and prolly make the company the most $. The "SAZ" line will continue to impress for their low load stability, high power output, and overbuilt yet simple design that has created a strong reputation for the name SUNDOWN. I wish the best for sundown for many years to come. Makes sense to me why you take the directions you do. A balance between what's best for the company & what the customer wants will prevail in my book.
-
SAZ 2000d to come after 5k?
If the 5k does not make full list by the deadline, can you start the saz 2000d instead? I'm really waiting for this one, I believe it's the route you need to take next in my opinion. Any input on this is appreciated, thanks.
- btl 18
-
Video of 18" havocs
what song is that and by who?
-
DR 12 - Filling the Gap
What will the enclosure requirements be for these? Sealed, Ported?
-
FI Q 12 trouble
Did you check your amp and all power & signal cables? Fuses?
-
SPECIAL SAX-100.2 OFFER
I hope I can take advantage of this before its too late
-
Mounting 18 Bl
Can you double baffle? 18" bl will do damage to a weak box and will sound like crap doing it
-
Ordering 2 12 Q's
If you want the best bang for the buck I would do the SSDs w/ a sae 1000d. The 1500 has a short wait for restock still ,so if your patient they will be available soon. If you have little man syndrome, you could do a saz 3000d on the Q's , but i would get the bp option then. A Rockford Fosgate power T20001bd would also be nice imo
-
Amp For 2 18" BTLs
Might be able to find a RF T4k for close to that aswell
-
FI Q 18 OR BL IVE SEARCHED BY THE WAY!
I dont understand why people are interested in higher frequencies for subs. The whole point of having them installed is to reinforce the bottom most octave. I could care less if my sub played higher, actually I would'nt like it but thats me. That is what my ''Q'' brings to the table, all the lows and nothing far over 50hz which doesn't bother me any. If my subs do go higher I filter them out by crossing over @ a lower frequency anyway. What I'm saying is, if you want higher frequency bass say 60hz- 100hz invest in some mid-bass woofers.
-
What change in T/S does BP do?
No problems w/mine. It gets pushed hard and I've never bottomed it out or smelled coil. This thing is tough
-
FI Q 18 OR BL IVE SEARCHED BY THE WAY!
What happened to the Q that you speak about? I pound on my 18Q 1 hour strait twice a day without problems.
-
Check these #s out.
No doubt, 2700 would be awesome from the 1500
-
Check these #s out.
Hmmmm, very interesting to say the least. Only seems possible on the most extreme situation though. Maybe too much tolerance on the measuring equipment itself.
-
The Big 3 Help
Actually, the alternator only puts out what is required from it until it cant supply any more above its ability then the battery starts to discharge aswell. e.g. at idle if no other loads are presented to the alt and you clamp the output wire, i've seen well under 20 amps. This is due to the battery being the only difference of potential. Output at idle can be under 10 amps especially if the battery is over 75% charge or { 12.45v }.
-
Fi subs Featured in Music Video
props for throwing in some real subs in a video
-
Two Q18s in the trunk
cant wait for those
-
Need help on a long lasting durable alternator
check excessive amperage
-
SSD15
Not as extreme as you think. 33 for good output everywhere, 30 for more authority down lower