Justin3000

okay, so if my amp does 400watts rms at 4ohms and 800watts rms at 2ohms, is it safe to say that the amp will do 600watts rms at 3ohms? and also will the maw 10's still have dencet output even though I am underpowering by 150watts? Thank you Justin

Well I will be wiring the subs to a 2ohm load which my amp puts out 800watts rms, so they will be getting alittle more power but no much..

Please close this thread.. Thank you Justin

really? I didn't know that.. Okay how about a blueprint for 3 MAW-10's sealed? Offer is still available.. Thank you Justin

Okay I am offering $10.00Cad to the first person to make me blueprints for 3 MAW10's in a ported enclosure.. they can be sperate chamber or all in the same chamber as long as the box is tuned to 29-30HZ. My trunk is: H-14.5" W-36" D-12" , The specs for the 3 10's show 1cuft per sub ported to 29HZ. I can't seem to do this for some reason so any 1 person that can draw up a blueprint will get the $10.00Cad.. PS- Port need to be in the front baffle of the enclosure, if all 36 inches are used... Thank you Justin

I like that design EFFENDI, it looks pretty cool and it would like really nice on MAW subwoofer..

Cool, I am really interested in that sub. Is there any prices yet? and also please keep us updated on any progress.. Thanks Justin

That looks pretty sweet man, how does it sound?

Welcome to the forum, Hope you enjoy..

What kind of cone Surround is that? I can't really make it out almost looks like a strong foam or a very thick rubber.. Anyway from what I've read this far I am liking this thing, I love the way the frame looks might have to mount it so it's inverted.. Justin

Cool, Any prices yet? please keep us updated as the subs breaks-in and let us know about the SQ as well.. Thanks Justin

Damn that's a sweet looking sub, what size is that? also I know it's a SPL sub but does it have decent SQ as well? I am just asking becuase I am very interested.. Thanks Justin

Sure, I will post a pic when the Lpg cups come in, should be only a few days..

M5 that's true, i could press fit them but I worry since hearing that the wire terminals break really easly, I ordered a pair of the LPG flush mounting cups and see where I end up from there.. Thanks Justin

Cool, thank you. I will check those out right now.. Thanks Again Justin

Thanks M5, I am hopeing it sounds great, This is my very first active setup and I am pretty excited to see how everything sounds.. I will deffinitly post pics when everything arrives and also post pics of my install afterwards.. Ps- Got 1 more question might have more to come: Is there any place that sells mounting cups for the Seas neo tweeters? I can't seem to find them anywhere I need the flush mount cup.. Thanks again for all the help Justin

Thank you demin, I have just got my tracking number for the Mli-65's yesterday and should be arriving here on Wednesday the 11th, I will be matching them up with the Seas Neo Textile tweeters. I also have to run some tests and review the Mli-65's as I promised mark I would. I also ordered 3 Maw-10's so hopefully they will blend with the Mli-65's for an overall setup.. Thank you and goodluck with your install aswell Justin

Man I just picture it now when you give it proper power and port it, then the beast will come alive lol. Hopefully you get the pics it would be pretty cool to see.. Justin

Okay cool, Thanks for all the help it is greatly appreciated. I will deffinitly post pictures when everything arrives and I will also post videos of my setups. Again thank you Justin

Okay Thanks again, as for the mids they will be going in inforced Kickpanels from q-logic but I dended the crap out of them and also put some fibreglass in them aswell. I will forget about the mids in the rear all together, not many people sit in the back of my car anyhow.. I will also go with the 3 mach5 10inchers ported, since I listen to alot of rap.. Is there anyway I could fill in the rear deck ( the holes from the other speakers are still really visible) I was thinking maybe buy some carpet just to cover? Thanks Again Justin

Thank you M5, you have been great help.. Ya I wasn't sure what would be best, so flush mount it is.. Can i also ask, what subwoofer would work best with either of these mids? I was looking into maybe getting 3 mach5 10inchers or maybe a single 12 dayton titanic but I don't want bass to overpower the mids I'd rather have the bass and mids complent eachother.. Thanks Again Justin

Hello guys/ladies, I have been buying peice by piece for a Diy active component system, Right now I currently have: Headunit- Sony Cdx-Mp70 ( yes its sony but it will work for now) 4 Channel- Power acoustik amp Mono Amp- lanzar Vibe1800D Electronic Crossover- Coustic XM6 Okay so for so good I guess, I am not too sure what to get for mids I am looking into Dayton RS series as well as Mach 5 Mli-65's. Mark at mach 5 is sending me some Mli-65's to test and do a review, I'll have to see if I like the way they sound.. As for the tweeter I have a pair of Dayton ND20FA's coming from partsexpress on Wednesday the reason I ordered these was becuase of all the reviews they recieved, I also have a pair of the Seas Neo's coming as well from solen. Again I'll have to listen to both sets of tweeters to see which I like best.. My question is: When installing Diy components in kickpanels should the tweeter be Flush mounted or Wedge mounted? My reason for this post is becuase I am looking for any suggestions that might help me through my purchases.. Thank you Justin

Okay guys this is what I've ordered thus far: Coustc XM6 crossover, Seas Neo TFFNC/G04 Textile tweeters, Dayton ND20Fa tweeters ( I bought these because of the great reviews they recieved). Right now I am still concemplating on Mids, I have talked to Mark which is going to let me test the Mli-65 and see if I like them and I will give a full review. I have also looked at the Dayton Rs 6inch speaker (which also got some great reviews) I will see what I like better and I will also see what I like better out of the tweets.. Thank you again guys..

Thanks for the Welcome guys

Man that is pretty sweet, Can i ask what size box and what is the tuning FR? Also that is a sweet camera you must have becuase the mic picked up everything including the echo's from the bass.. Justin