NB50

Bought both of them brand new from a local shop, the 2200 back in the day and the 2300 from the same shop a couple years ago. The 2300 sat there since I bought the 2200, I think it sat there for about 10 years and nobody bought it. One day I finally walked in there wheeled and dealed and bought it.

2300 is running a revolving collection of woofers, from a TC LMS-R, AA Havoc, SSA Icon, IA Flatlyne, LA Storm Neo.

I'm happy with my little collection. I love running the 2300 for sub duty.

Take off the gasket and make sure it didn't go through to the side of the surround.

Guy at work did that the other day. He called the police and the locksmith both told him it'd be a couple hours so what did he do, broke the window and got in. lol

Your sketch up is not accurate, port is not the same width the whole way and is longer then 29".

Maybe you should take you own advice then. Sounds like there is more then one location. Facepalm. When my PSi stuff got here, guess what? There was a MS address on them. My friend has 10 woofers from them, he WENT TO THEM to pick them up. He was in MS the whole time. David's PHONE NUMBER is MS. And yet he talks about having a Vegas location. More then one location.

Maybe you should take you own advice then. Sounds like there is more then one location.

Funny he has his myspace for Fixmyspeaker as Las Vegas. http://www.myspace.com/teampsi

Pretty sure he is in Las Vegas.

Why can't anybody else in the world give away their own gear?

It is not a lie, I don't care for the way they sound and are one of if not the worst I've heard. It is not the enclosure it was in either, tried it in a sealed box giving the sub a QTC of about .76 and a ported box 2ft^3 @ 31hz. The response wasn't as smooth as other drivers and the low end was terrible, not to mention it needed over the recommended power to have any satisfactory output to it. Dealing with Kevin was also horrible, it was like pulling teeth just to get an answer. Multiple email of the same question just to get one answer, him forgetting my order and me having to tell him multiple times what it was, Having to tell him where to send the sub multiple times, among others.

It will be posted between 4 and 6 and will only last until the quantity they choose is run out.

F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5 F5

How about you list all the dimensions of the box.

Disconnect the wire from the amp also, capacitors can store a charge after power is disconnected. The current sent out from the meter will also charge the capacitors. All fuxoring the reading. Pretty safe to say if you have already smelt burning electronics in the amp, the amp is dead.

Your talking about measuring resistance, you can't do it with power in the circuit. A DMM sends a known current threw the circuit and measures the IR drop and then calculates the resistance and displays it on the screen. When you add an outside power source to that it will give you an incorrect reading.

Just because the amp doesn't come on doesn't mean there wont be power at the amp terminals. You can't measure resistance with power in the circuit.

Maybe I'm missing something, but why are you trying to measure resistance with power applied to the circuit.

Try going though this. http://www.soundsolutionsaudio.com/forum/topic/35027-noise-troubleshooting-guide/

Doom/Doom2 > MW3, BF3, Whatever other shooting game you can come up with.

Shhh no names. I only know cause I just picked up a <09 Q motor and was doing some research on it.

No http://www.soundsolu...ecommendations/