NB50

One sub is going to get more power then the other.

Why not just use the tens in your room if it is temporary.

Tuning seems really high.

https://ssl.perfora.net/www.ficaraudio.com/...view.shopscript http://www.soundsolutionsaudio.com/forum/i...?showtopic=7153

Pics of chrome USA's

Happy Birthday. Here is what you wanted.

Went and saw NIN & Jane's Addiction in concert last night, had a great time and was pleased with the show.

Not sure what you mean. Incriminator Audio King of Bass series woofers. They designed them for Tommie Mckinne. There is a little info floating around here or email Nick.

I'd see if you can get a little more info on IA's KOB series, from my understanding getting loud in a sealed enclosure is what they are designed for.

I played a round last weekend. Hit a bad tee shot on the 4th hole, took a mulligan. Hit a decent tee shot on the 5th hole but landed under trees and there was no way to hit over them had to keep it low. Kept it low and ended up in the sand took three shots in the sand and gave up, so I started drinking more. I was having the hardest time with my balls just going like 20 degrees straight right of where I was aiming. I was very consistent with it, unfortunately. Not really much slice movement usually if at all, they just went right. I couldn't figure it out. Maybe I'm swinging a little inside out. I think I pulled like one ball all day, and it was when i was trying to overcorrect the right shot on purpose. They were all either completely straight or straight right a bit. About 5 times I said ok, I'll just aim 20 degrees left of where I should aim so that the ball will end up where I want. Of course EVERY time I did that it went straight. I was in the rough for 80% of my shots. That was frustrating. I have the same problem only mine go left of target line. A friend of mine was watching my swing and said my club face was closed at impact.

I played a round last weekend. Hit a bad tee shot on the 4th hole, took a mulligan. Hit a decent tee shot on the 5th hole but landed under trees and there was no way to hit over them had to keep it low. Kept it low and ended up in the sand took three shots in the sand and gave up, so I started drinking more.

A damp rag works well. I know my subs came with a disclaimer for cleaning the box of saw dust.

There is nothing wrong with that amp. I'd rather have it over some of the class D amps on the market. You may want to look into some FMODs to use as a subsonic as I believe that amp doesn't have one.

Nothing, they were just names of motors from TC sounds.

Reminds me of the Gnome logo.

I voided the warranty a long time ago when the coil burnt from a clipped signal. Even if that had never happened though the magnet cracked after a year of owning the sub. All I can do is fix it up myself until it is beyond all repair, which shouldnt happen unless it completely shatters or burns up. You do realize they may have been lenient on the one year warranty deal with your cracked magnet situation.

http://mobile.jlaudio.com/support_pages.php?page_id=165

What determines if an amp is an 'ess que' amp or not... ? And what does is have to do with what woofer it will amplify ? that amp is a 2 channel class a/b amp they are mostly run on mids and tweets and when ran mono they tend to get hot but they have a lower THD than class D amps which are made to run subs and doing so they don't pick up those high frequencies like class a/b amps so they tend to run cooler because they play the lower frequencies only and don't have to play the while range all the time saving current to the lower tunes call for it that's why you see more people running class D amps for subs and with that mp 4ohmsis what it plays in mono if you go lower than the 4 ohms you cause that amp to overheat go into protect and most likely blow a good amp playing to low of ohms if you want to play under 4hms you should gt you a class D amp dual 2ohm subs can be series up to 4ohms and you will be safe

Can you reply with out getting feisty? took your advice. I thought I was quite well behaved. I just put myself in the other guys shoes. Well said. Same lines I was thinking, but They way I would have said it wouldn't be as clear.

http://www.carquest.com/ http://www.carquest.com/common/downloads/p...eriesCQ_NGT.pdf those are identical to the dekas... Duh. If you can't order a 9a31 go to the store and buy one. Use the store finder, find nearest stores, call them and ask if they have an NG31, how much, etc, etc

http://www.carquest.com/ http://www.carquest.com/common/downloads/p...eriesCQ_NGT.pdf

What is the subs coil values? How was the sub wired to the amp?

This weekend. Got the door panels off, heres what I have to work with. Reduced: 82% of original size [ 1024 x 768 ] - Click to view full image Made a template for the mount started cutting the mount when the jigsaw I was using attacked me. Seems the fan broke on the inside and one of the fan blades shot at me. didn't go any farther then the shirt though. Reduced: 82% of original size [ 1024 x 768 ] - Click to view full image Test fitting clearances. Reduced: 82% of original size [ 1024 x 768 ] - Click to view full image Trimming up door panel to allow for clearance. Reduced: 82% of original size [ 1024 x 768 ] - Click to view full image Reduced: 82% of original size [ 1024 x 768 ] - Click to view full image All done. Reduced: 82% of original size [ 1024 x 768 ] - Click to view full image Reduced: 82% of original size [ 1024 x 768 ] - Click to view full image Got all wiring done and amps installed. Still need to make temporary mounts for tweeters to play with positions, then final mounts, and to tune it. Still need to order deadening also.

Van Halen - Eruption. Seems I can listen to it over and over without getting sick of it.

You can get that surrounding feeling without rear fill.