stevew007

will part's be avilable when they blow? or would we need to send them in?

I don't like them!!! . . . . . . . . . . . . . . . . . . . . . . .. so when can I order 8 12's

we need alot more info before we can help! wire size? fuse size? what fuse's are blowing? what ohm is the amp @?

I was wondering about basket's and recone's!

wondering if I buy a couple MT motor's can FI help me out? [email protected]

so u don't have any?

the simple thing's in life are the best. A buddy of mine came by with his chevelle and the spot weld's were coming off of his trunk lid and cross member's so the bass sounded like ass. so i got a $5 can of foam and it was a completly different system after that.

so using 2 3000's is out of the question???

$262 for a composite cone . that is a little out of my range right now. sundown help make this happen! that's what it has to do with it neonrider

just wondering if i could beef up a paper cone with some resin on my ten's? can someone tell me how they did it? front or back?

it was a DD 9510 i'm sure it all played a factor in the destruction of it. but that is what happen's when you put 8000+ watts too a couple 10's.

funny thing is I've been doing this for 10 year's and this is the first death of this kind for me. I was happy but my wife said now what are you going to do? i said buy recone's! i might be sleeping on the couch tonight for this one

well i finished my box today and did a test and did 151.8 and shredded one woofer.

well he put up a fight right till the last 151.8 today. made a new box with 8" aero port common chamber.and this was the number and result's from the first burp. so now to wait for some recone's.I might try some different coil's but I'm not sure yet what ohm these amp's are wanting yet. oh this was with 2 3000d's the second picture was of the other woofer. i just rolled the volume and poof it was gone and it only did a 146.?

well i made a jig that I can scrap around the top and make my flare.hopfully with very little sanding

port is 8" with a 3" flare. the bottom peice is going to be the back of my box.I still need to do some rounding and bondo but you see the picture's

YUP! that's what she like's

I don't think the sub's got weak overnight. the box is tuned around 58 hrtz and i play @ 53 hrtz. I have went from 22" port's down to 15" port's and were it is posted the best number's. I'm going to try hooking up one of my big batt's that float @ 14.5 volt's and see what happen's. then it's a new box design using one big port common chamber box.

ok update battery @ 13.8 burp it voltage droped to 11.6 and only did a 150.1.and yesterday i had it doing a 151.7.

You may be losing SPL due to your increase in power and just simply need to start sound deaning your vehicle... just a thought but im a noob and I learn from Ray aka Team Man Up I believe his SN is on here. just got done talking with him on the phone.I'm starting the new build today

ok changed the port length from 20" -18" and did the same number @ the same 53 hrtz that I alway's play and i tested from 45-65 hrtz

well with 2 8" port's that will take my tuning out the roof like 70+ hrtz with that size of a box

well it an 89 si. the box's are .98 cub each with 6" aeroport mounted external 20" long.tuned around 56 hrtz playing @ 53 hrtz woofer's forward. nothiong special about the box's just rounded ext corner's, 4 run's of 0gauge from a nsb-90. no matte in the car. the rear seam's are taped off.the car has good seal's in the door's.the rear speaker's are blocked with a peice of masonite.before the 2nd amp went in the car did a 150.7 after the the 2nd amp it did 151.7 was the highest.I going to try a box that ray told me about and see how it hang's

i'm burping @ 53 hrtz. thing is with a z1 @ 1/4 ohm i did a 152.2 so i was thinkig I'm getting a little more then 4400 watts out of these 2 3000's. i was wondering if my note would change with more power?I did a few test burp's and 53 is still the loudest. going to work on it later today. and see what happen's

2 9510's