stevew007

come to find out the batteery's were sitting for 3 year's. and i had put a hot charge in them because i was in a hurry. oh well still did a 151 did'nt get the 6 footer i wanted! but still put the squeeze on a guy with 4 9515's and 2 6500's. he only did a 152.2. i luv the fact that people look @ my POS crx and shrug there shoulder's until i unleash a hurtin on em. SUNDOWN FOR THE 2ND PLACE. I'm not going with 16 volts anymore this was just for 1 show. thanx guy's

couple 8 volt's batts. reding 17.98 volt's and dropping to 15 and some change when I burped it. only doing 150.2 on 16 volt's and doing 150.7 on 12 volt batts

well i went from 12 volt to 17.9 volt's with a drop to 15.? and did'nt make a gain i actully did better with 12 volt by .3 i tried a line driver (8volt) and did'nt help a bit. wtf is going on here any idea's ?

ok i put in the big battery and got one good test @ 1/4 ohm it did a 152. but with only a limited supply of power the 1500's did not like it @ all.I have run .5 ohm strapped with one 10" and they did just fine. super product can't wait for the 3000's. for me the strapped 1500's are just as powerfull as the DD Z1 ( before you guy's go bashing this is my testing)

151.4 on the TL with 2 10's and 2 1500's on 1 battery! Enuff said! Oh wait, and great customer service!!!!! There is not a time that I email Jacob and do not get a response within 2 hours or less. SUPER guy, super product. Now buy before "no soup for u". Did you read the z1 vs 2 1500's post? Well @ 1 ohm strapped my 2 1500's were louder then 1 z1. I did get a 1/4 ohm roll out of my amp's and hit a 152. Damn skippy if you ask me in comparison to an amp that's rated at 3000 watts but has proven test runs of 4400 watts at 1ohm.

i always test out side the car and with a battery charger.

that was another reseaon i stopped playin it @ .35

ok a freind of mine came down and i ran some 8 gauge to his z1 to my car. my car with 1 nsb-90 and 4 runs 0 gauge did a 150.7 @ 1ohm on the TL my car hooked to the z1 with high output alt a nsb-90 and kinetik 2400 2 feet from the z1 did a 150.2 @ 1ohm we did get 1 test @ .4 ohm and it did a 152.2 but did'nt have enough time to mess around because we needed to recone his xxx's but i will be adding a very large battery to my system to see if i can't get my amp's to do .4 ohm for a show on saturday and i will post number's later this week

well with the battery charging for 7 hour's I ran the car and it went from 14.4-11.4 this don't sound right! wonder if my battery is taking a crap on me

what kind of drop should i be seeing from a pair of strapped 1500's @ 1 ohm for a burp? I'm using a nsb-90 with the car off. it goes from 13.8- low 11's. is this right? i'm going to start and run my car in the morning and see what the drop is!

i hear they don't work well at all Thats odd since the guy who is doing that here is doing 154+ I was told this guy's best a 150.7

i hear they don't work well at all

well the top street A dbdrag finalist's run bigger then 6" i've heard from scott and been talking with him and he said terry and tuan along with himself run 6" and bigger. i'll try it and see what happen's

well i tried 12x12x19.5 long with 18" areo. woofer's in the front still only did a 150.5 @ 54 hrtz. I'm going to do some more testing later this week and hopfully find my lost db back

no everything is in the same spot! they were stuck to the carpet from the resin being tacky

well that was a bust started out 1 db down from yesterday took out the plastic and gained my db back. still don't know where i lost a db in the first place.

well i'm not even going to try it.don't need them fried

yes i have a Termlab and this is just for a local show not dbdrag's

it will be a while before i change the box and make port's for it.the best so far is a 151.4 and yes this week i will get some pic's. there not much to see. you know with all the top secret stuff i'll have to cover in the picture's LOL

what is the avereage gain when i pull out all the rear plastic????? i need to beat a guy in a local comp. i did a 151.4 and he did a 152.9 If i remeber right it was 2 db! Any help before next satureday would be great

I will try it and tell you what happens

ok so i can do 1/4ohm on these for a burp?

well i think the equipment need's warmed up a little. because i went up yesterday and tested and it only did 150.5 with a great charge on my nsb 14.2 volt's

i'll give it run @ and see waht happen's thanx

ok wenjt this morning to start sanding and putting resin on the box's. did a test first and did a 150.5. yesterday i did a 151.2 several time's. i have never heard of warming your amp's/subs up.