Bizzy Beats

I'm open to suggestions.

I am thinking about purchasing a Rockford fosgate 3sixty.3 but I am wondering if it works with apole laptop. this might be a dumb question but I just want to make sure. I would like to program it through Bluetooth with my laptop.

I have been wanting to put a mac mini in my car for a while now but still have a few questions. First off, would I need a head unit or could I somehow just use a amp and a sound processor? If so how would this be done? Second what are some good 10" touch screen monitors that will work well with a mac mini?

when your system is worth more then your car.

15s it is then. anyone know where I can buy Busbars?

my goals are to have a daily system that will kill the lows. but I will also want to get past 55:) I don't exactly how much space I have but it will be going in a Tahoe. I will have about 3k rms per sub. how would the sp4 18" do sealed?

I Don't really have enough Room for that much port area. would it be better to have 4 15"s with the right amount of port area or 4 18"s with a port like steves?

I have been looking at Builds trying to plan a box for 4 18" mayhems but I noticed that Steve has a tiny port for his 4 18"s in his Tahoe. how is it possible that he hits so hard with a small port? could I use a box like this and get the same results?

ok sweet I will plan around that thanks.

oh ok. if I did get a ascendant mayhem 18" and a t2500-1bdcp what enclosure would you recommend?

what do you mean alignment ?

how will a mayhem be on a Rockford fosgate t2500-1 bdcp?

I will have room for a 15 "

the havoc does sound very good! maybe I will save up and get a mayhem..I really like the lows though. does the mayhem get down like the sp4?

how much louder would a mayhem be? or how about the fi sp4?

I built a box last night 2.5 cubes and tuned to 30 hertz with 40 inches of port area. same result sub bottoms out at about the same volume.

so 2.5 cubes with 30 in of port area tuned to 28 hertz. sound good?

ok thanks. I will be building a box tonight then.

I have heard that sometimes bigger boxes can reduce power handling. is that true? if so would I be better off going with a box around 2 cubes?

Ok so this is what i came up with. The outside dimensions are, Width: 20.5" Depth: 12.5" Hight: 28.5" (I plan on using 3/4 mdf). After port (.7869 ft^3) and driver displacement(0.16 ft^3 i hope) there will be 2.16 cubic feet. My port will be 2.75" x 11" and about 43" long, which puts tuning at 28.2ish hertz. Also my driver will be facing up and my port will be facing back toward the trunk.

so I took it out of the box and I noticed when I press on the dust cap on the side it sounds like metal is hitting but when I press in the middle is is fine. I also played it in free air and it sound like it has a little high pitch whine when it plays. the whine gets louder as the frequency gets higher.

so keep the box at 2.3 cubes and lower the tuning to 28-30 hertz? would a 6" aero port be sufficient? or should I go with another slot port?

so 2 inches total? if so then yes.

could I build a different box to where it won't bottom out? I have heard of people putting 1500-2000 Watts on a havoc daily with no problems.

ok I will what exactly am I listening for?