Loud01Blazer

Wanting to try 2 BL 18's and will have about 1600wrms going to each sub. Is that too much? if not, which options should i select for them to perform well with that much power. It will be a daily beater/bass racer..box will probably be around 10 cubes net crx style with about 150 sq inches of port if this helps at all.

4 12" subs and 2 t4000's for 300 bucks....i'd have to see it to believe it

true, but i'm sure that'll void the warranty..

i would suggest using a sundown SAZ-1500d. It's underrated @ 1500 @ 1 ohm but i think it would suit your 18 very well. and it definitely won't empty your pockets..

Jep, trying burping a little higher like 50hz...or run like a 55-45hz sweep I've been told your peak freq. is usualy 7-10hz higher then your tuning..

depends on your subs vc config. The Kicker will do 2500wrms @ 2ohms, and the rockford will do 2000wrms @ 1ohm

Vehicle: 2001 Blazer 2dr. Head Unit: /////Alpine IVA-D310 Amp: Sundown Audio SAZ-3000d Front Stage: Memphis 2-way 4x6's in dash, Memphis 6.5's in the doors Rear Fill: Memphis 6x9's Sub Stage: (2) Digital Designs 3515's 8.5 cubes net, tuned to 34hz Wiring: Stiner HPM/Knukonceptz KLM Electrical: Big 3 done in 1/0ga. 200amp H-O Alt. Optima Yellowtop under the hood

HU: /////Alpine FTW Speakers: Boston Acoustics Memphis M-Class Diamond Audio Subs: Digital Designs Memphis PR Kicker CVX and up Amp: SUNDOWN AUDIO FTMFW Wire: Stinger Knukonceptz

x2? Otherwise, it looks good man. More Pics!!

thats with the ho alt optima under the hood, and one stinger spv44 in the back...the stinger is just temporary

i'm extremely impressed with my 3000d...it's holding up quite well on my electrical, only thing not holding up is my blazer. i guess it's not used to being beat up @ 31hz Will post vids later!

This was me when i hooked up and started messin around Very nice amp! i got it wired to 1/2 ohm and it *sounds* so much louder then when i had the 2 1500's on em. Can't wait to get this on the mic! Thanks Jacob!

i'm getting very anxious! I'm recieving mine tommorrow

I wish you would've had the 9515's for sale before I bought my 3515's

sweet set bro! DD subs and sundown amps are a match made in heaven

eh.. it's all good hopefully i'll have my new one by next monday...and if the problem persists, looks like i'll be "tearin down" my truck to see whats up..

only have one fuse and it's fine

sounds good jacob. hopefully you'll recieve mine by wednesday. got it ready to go! I would try puttin it in someone elses car, but all the people in my neighborhood i know are running like 12ga power and ground wire and 18ga speaker wire. lol so i don't think it would work. plus it would probably blow there sony's. the only guy i know thats into it that has a good electrical setup works like crazy and is hard to get ahold of...

haha i really appreciate it man!

will do. i'll try and get it shipped tomorrow. i was hoping it might have been something else but i literally checked everything, now i guess i just gotta be little bit more patient and wait on the new one

well i got a 200 amp alt, a yellow top under the hood a 300 amp stinger anl fuse, and stinger hpm 1/0 gauge...along with 2 stinger spv-44's(temporary) secondary batteries in the back. what more do i need to run this? like i said before i had absolutely no problems running both my 1500d's on this exact setup all day long.

anything else i should check before i box it up?

i took the subs out, and there wired correctly. every connection is solid as can be. my 2 1500's ran fine the way it is except the ohm load was 2 ohm strapped on the 1500's. When the subs cut out it's almost like the cd is skippin but it's not.

Ok, got my 3000d today. Wired it to 1/2 ohm, and it just doesn't seem to be putting out power. i had the gain set at about 1/2 and it just seems like it's not puttin out the power. voltage read 14.53 and amp read exactly 0.5ohms. Also, when i turn it up to where i normally listen to it at the subs start cuttin in and out so i turned the gain down more and also turned the sub control down to like 5/15 and it still does it. Voltage barely drops, and it's really not loud AT ALL. what could be the problem?? Also, the amp never went in to protect or anything, i'm stumped...