shizzzon

Taramps DC Power Coleman Cable (CCI) SPL-Lab Direct Sound Solutions (DSS) Red Star Alpine

I guess this is where i'm going to need some more info.. Your analogy of- Amp A 100wrms 200wpeak vs Amp B 100wrms 400wpeak If an amp is going to make the speaker(s) sound any different, wouldn't that just be a reflection of how much distortion is being driven to the speaker(s)? If both amps do the same continuous power at the same everything, voltage, input voltage, HU volume number, bla bla bla.. And both amps output 100wrms at the same distortion level, then how would Amp B sound any better? Another problem i have is this- IF i am looking at this wrong.. let's say I was.. This whole discussion about dynamic keeps going back to when playing music.. playing music.. playing music.. It takes quite a bit of power for the human ear to hear a difference in amplitude. And dynamic is so quick, it would be easily debatable, in my opinion, that even if an amp doubled it's dynamic output power when playing music, no one would be able to hear it. Just for kicks.. i haven't seen a single amp tested where it's dynamic rating is at or more than 200% of it's certified output. So.. because of this, if I installed a 2000w amp and then swapped it out for a 3500w amp, i may hear a difference on some songs but not all and this is practically doubling my amp power all the time.. The ability to measure dynamically to show an increase in output power for the sake of saying this amp will sound better doesn't make any sense when dynamically speaking in the real world, the spike would be too fast and not enough amplitude to audibly hear a difference. You may not be comparing output power to output power.. but if the dyno says it does it of a % greater than the certified score.. then same rules apply in a vehicle or with any power supply weak or strong.. Dynamic is always higher obviously. So.. output power or a cleaner audible experience.. all other things being equal especially THD between multiple amps, there shouldn't be a reason why one amp is\would sound better than another.

I did it! 8 subs, 3 layers thick.. working on sealing around the area where the baffle must go.. Then building under the wall and all that.. I have to take all my front seats out and the console to try and get this baffle in.. I'll try that next weekend as i got some more wood to cut.

I cant stop drinking this raspberry rum.. But dont worry.. it's backed by 151,

No one can disagree with this. Quentin did his research and jumped into the scene prepared without a doubt!

I have run over a dozen aq amps and not one problem. I didn't mention just amps, but subs too. They should have never started their company when they did.. They were too amateur when they started.. Then they publicly announced they would never do a large competition amp.. yet they brought out the AQ20k.. I can't tell what to make of them. Then they started selling Stetsom on their website.. That would be like going to Fi's website and buying Tantric subs. It wouldn't make sense. Like other companies, it's their business ethic that's in question.

Spl lab supports more functions with all our hardware to choose from than termlab. To do a whole sweep like what you are saying, just use peak hold with either of our products.

Since the recent public news of getting the Termlab to work with our SPL-Lab software for FREE, we have moved one step further. WHE has never supported Mac or Linux. We do not know why so we took it upon ourselves to do that for you MAC and Linux users out there.. and yes, for FREE. So at this time, we have advanced the following- Customers using SPL-Lab Software- Termlab = Windows FREE Termlab = Mac FREE Termlab = Linux FREE SPL-Lab = Windows FREE SPL-Lab = Mac FREE SPL-Lab = Linux FREE SPL-Lab = Android FREE Here are the instructions- Many of users asked about version of Spl-Lab Measuring Center for MAC OSX and Linux.I can tell you that we are not planning portion our software on there platforms...Why?Because you can run current Measuring Center on your Mac or Linux! All you will need is:1.FREE VirtualBox software! https://www.virtualbox.org/'>https://www.virtualbox.org/2.FREE latest version of Spl-Lab Measuring center http://www.spl-lab.ru/download/SPL-LAB_MC24.zip'>http://www.spl-lab.ru/download/SPL-LAB_MC24.zip3.FREE latest version of INSTACAL for those who wants to run TERM-LAB3.Windows XP,Vista,7,8,8.1 installation CD Here is what you need to do1. Install VirtualBox for your platform2. Create new virtual machine3. Install your copy of Windows4. Install VirtualBox - Guest AdditionsIn the "Devices" menu in the virtual machine's menu bar, VirtualBox has a handy menu item named "Install guest additions", which mounts the Guest Additions ISO file inside your virtual machine. A Windows guest should then automatically start the Guest Additions installer, which installs the Guest Additions into your Windows guest. Other guest operating systems (or if automatic start of software on CD is disabled) need manual start of the installer.6.For Linux users add your current User account to "vboxusers" account group through settings or with command line by typingsudo usermod -a -G vboxusers USERNAMEUSERNAME - your account name for example gonzo5.Install INSTACAL if you want to run TERM-LAB6.Connect USB devices to your Virtualbox Windows(device - usb)7.For MAC OSX first of all add there USB devices in USB Filters virtual machine settings, and after your machine will boot unplug and plug your measurement USB device from PC.8.Start INSTACAL it have to find your TERM-LAB - USB1208LS device.9.Start Spl-Lab Measuring Center10.Begin measurements MAC OS X 10.9 Linux Ubuntu 12.04

I must say.. I cant get everything from companies who build their own stuff.. but those who I trust deeply, I'll work with them.

Its expensive in the sense of what you all are going to see next year. But for right now, pricing is normal for what the market is used to. One of my aq2200ds bout 5yrs ago had a piece of metal grounding out the inputs inside brand new. Also, first time I bought an hd3 from aq before, they internally shorted the coils. Lack of QC.. no thanks. Im sticking with companies now who actually build their own products rather than having someone else build it for them.

I want a big fat D class, one I wont have to replace with a bigger one in 3 years, or because it broke. I want in the 3000 watt rms range. but will come down if the circumstances call for it(really impressive features, flawless reliablity, Rarity, anything like that) Its just tempting to get the AQ 3500.1 I mean, who can say no to 4200 watts rms at 14.4 volts-1 Ohm for $800 shipped. but thats why I came to you guys. Actually, that's quite expensive, but i can't say anything until next year. If you want impressive features, look at Incriminator Audio or CT Sounds for the time being.

ANY battery needs to be manually charged if the alternator can't keep up with the load. But under normal usage, that is false about requiring to charge agm just for the hell of it.

Instead of approaching the different battery types like that, look at it like this- If any battery is going to be INSIDE the vehicle, it needs to be AGM for safety reasons. AGMs are built to withstand vibrations and to prevent gassing unlike a typical Lead Acid battery. AGMs are still lead acid but completely sealed and much safer. Gel batteries have ultra strict charging tolerances that cannot be sustained on a car audio system via an alternator. So.. AGM is the only way to go for safety and long life.

is the load tester you have access to Fixed(100A, 150A, 200A only?) or variable(10-1500A?)

Thank you Shizzon. I appreciate that. I just had a horrible feeling like I was buying an old school MTX RFL woofer and if you remember those were strictly a burp woofer Yea i remember.. the TRF. The RE MTs were suppose to be too. they were a little more lenient but still not lasting in musical setups. Many damaged MTs came about in that era.

The Judge would be viewed in a sense like how the BTL N3s were.. They were pushed to be "SPL drivers" but SPL isn't burp. People get that mixed up a lot for some reason. Nobody really wants to make a burp sub anymore because there's hardly any profit in doing so. So.. the BTL N3 was NOT a burp sub and neither is this. It has potential to have a non-flat response. "SPL drivers" geared toward competition formats need to focus on single frequencies primarily but still be musical. Many formats require averaging and you can't use old school burp subs on formats like today on extreme high power. So, yes, this sub will play music. However, if you require ideal response out of it, i would talk to IA about getting some options added to it before it's built.

IA dont make burp only subs.

Happy Birthday!

Is the load tester variable or fixed output?

IT should man. I do not know about the older meters prior to ~2008 but doesn't hurt to try. It's free to use so why not?

Oh ok. I thought about watercooling one time.. but eh.. the minute amount watercooling helps over Thermalright Heatsinks and dual\triple 120mm fans can do.. i always just stayed with air. My systems run 24\7 so i never do any crazy OCing. My older Core2Quad 2.5 is OC'ed to 3.44 and that's it. Any higher and it gets finicky. I require more uptime than anything. I do like speed though for some transcoding. I've been eyeing sixcore i7 for a while and now Ivy Bridge is out in six core now.... It's paradise to own that.. but until then.. i've lasted 1.5yrs now without building it.. so i'm good so far, hehe.

Kicker amps are not bad. Their subs is what lack potential.

And it's not just them.. I've gotten on SPL-Lab for doing this stuff too man.. You know it took SPL-Lab TWO YEARS after i joined them before a manual was ever written and the company was active for 5 yrs before the first manual was written. It must be a translation thing, hehe. But in the end, the job does get taken care of. Enough complaining and "constructive translated criticism" gets it done.

Oh i know what you mean. It frustrates me just on how each translation side has a different set of products.. Like it was originally with SPL-Lab, it will be up to the distributor, or I, to take care of the customer. That is NOT the job of the distributor in this sense but i am used to it and do not mind sharing the proper information, in ENGLISH to customers. From talks with them in the last few months, it appears they have just randomly changed shape and target as many countries as possible to get their products outside of SA and to the rest of the world and to do this, do that, etc.. IT sounds like an organization plan without an ETA of any definite organization. It's possible it's happening in real time so no one actually knows when this will be done and this other thing will be done, etc.. If it starts to really become a problem, I'll address it but in the meantime, I should have the information necessary to help anyone with their products when we start distributing.

This is the thing.. They distribute to 13 other countries besides themselves and have been doing so rapidly. But like your point of view points out, there are convenient limitations one takes for granted when getting amps built out of the country. These, you can clearly tell all the way to your doorstep. I translate many things for SPL-Lab and am willing to do so with them as well.. The funny thing is all of their downloadable manuals cannot be edited because they are not typed. So, it would be hell translating that but it is possible.