shizzzon

built in protection is like a circuit breaker. Fuses is like a beefy electrical system. Fuses react faster than a circuit breaker. If something goes wrong drastically real quick, protection won't react fast enough.

I've been havin a problem with my entire abdominal area for the past month and have gone to the doctor about it twice in the past month and now, the 3rd time i am being referred over to get an Ultrasouns done on my gallbladder tomorrow. The doctor fears it may be failing or i have colon cancer... but some symptoms that are common for colon cancer i do not have so hopefully it isn't that severe. IT's very bad pain sometimes. Bloating, cramping, severe sharp pains in the colon, digestive system refuses to work properly, so instead digests twice as slow and forms large amounts of gas. When this happens, it makes me very hungry. Something turns off that limiter in your body to tell you when you are full when this occurs and i can eat forever if i wanted to but i know how much i normally eat so i stop myself. They told me to take more fiber but when i do i become even more constipated. Basically what it comes down to is everything that is suppose to happen, my body is having completely opposite effects so they wanna do an ultrasound so they can attempt to see what is going on inside. Hoping it isnt anything too serious.

I know it isn't. Get the BL. I used to own an a2300hct and it only had 160A of fuse. I never metered it's output but wired @ 0.5 ohm nominal in stereo was the only way it put out decent power. It couldn't do it for long though on music, it went into protect in bout 60 second due to heating problems.

They don't make kits that big because they can't get all those batts and cable to fit in that plastic box,

OK, i'm going to announce this so not only but others will know too. THIS TOPIC NEEDS TO EITHER ME MODIFIED OR DELETED. Now, the following site that you listed is ILLEGAL. They have a full streaming copy of a pirated copy of 10,000 BC ready to view for free and does play from a movie group sourced outside of america. Because it is a website, it is HIGHLY RECOMMENDED that you cease all activity at this location before you become a possible target if and when this website gets shut down. It is illegal to host or to directly link copyrighted material which has been proven MANY times in a court. If the site gets shut down, all IP addresses that have been logged will be part of the investigation. Just like when TorrentSPY got shut down. Anyone who used the search engine, their IP address was logged and handed over to the MPAA who got them taken down. A little piece of advise, do NOT try to get free stuff via http, ftp, fxp, p2p, torrent or irc without a high level firewall with anonymity service combined. You put yourself at risk. There are other methods besides those but this entire topic due to that link is prohibited and i refuse to help any further. The streaming videos are shockwave based using a .swf extension. All you would have to do is get a queue manager, view the source code, put the link itno the queue manager and force it to download off of their server. If they use CGI or the likes and the link refuses to download through a queue manager, use a program that can snake files right off their server. "snake" is the key word here.

25%!! Wow!, that's hella inefficient. Off of 13.8v, to output 300w at 85% efficiency(class d typical @4ohm), power draw would be 25.58A of current. Off of 13.8v, to output 300w at 20% efficiency(class a example), power draw would be 108.7A !!!!! With 109A of draw on class d amp at 85% efficiency, you could output - 1270w+! That's a big difference!

no you don't, There is software out there that can do desktop video capture with overlay supported to capture live video. But, if you do not want to publicly say, PM me and tell me exactly what you are using to view movies online so i can help get them to DVD for you.

Welcome, another kentuckian, just like me.

Perfect explanation. The lower the load, the lower the efficiency which causes a need to draw more power just to output the same power. The only good thing I know about having an amp with same efficiency as another that can output let's say 2kw @4ohm vs 2kw @1ohm is - Less current output from amps speaker leads so u could use smaller speaker wire but that's only thing I see.

is the 15 dual 1 or dual 2?

Watch that, i am angry at Cadence for what they did. When they first released the ZRS-8, 9 and 10, i bought the ZRS-10 rwated at 2,500wrms @1ohm monsterous lookin amp. I got it in and nothin told me what size fuse to use so i called up Cadence and asked them what to use... They told me the ZRS-10 is required to never use a fuse larger than 130A. I asked them again because i thought they misunderstood and they persisted in telling me again. I was somewhat angry with them and asked them how i was gonna get that kind of power out of the amp and they said i would... full of crap power... the best testing i ever got out of that amp was 1,300w full clipping. Just a hair over 1,000w no clipping at 1.6 ohms. Rated at 1,500w @2ohms..... I no longer trust them anymore and they pulled that line quick i seen.

oh, i remember that event, never been there but fairly active from what i've heard. Someone got a noise violation citation over there last year maybe, year before that... sometime not long ago. They said was tuning system right outside of the property or something like that, PURE BS but place should be great.

well i know power doesnt reference how much specifically but i assume he told me that in regards to an average daily setup. You can always go back over specific areas with spectrum or sludge.

ur runnin the Saz-3000D? I was told by SecondSkin that with that much power to use 3 layers of Damp Pro. So... I would advise goin that route by means of probably just ordering a bulk package. I own a 2door coupe and i'm installin 260sqft minimal until i get my setup in to see what else i'll need.

shhh..... i can do that with my Ipod.... May have happened at SBN?

sounds good

HA! If it's at Audio2Go, meterin my stocks might win me somethin, seriously. I've been there before and while i did see a couple of big timers there, there were a lot of questionable installs as well. To tell you the truth, i'd like to go, but if the weather is great next saturday then i'll just stay here and work on the car. That's what's holdin me back so much is this weather.

when is it? I won't even have a setup til another month to month and a half from now. So... unless you want me to meter my stock speakers....

r u talkin about "THE Lil Jon" or someone else that goes by that name?

I'm not surprised. IF you bring something to a local shop that they do not sell, expect to start hearing BS. In my experience, the only time you won't hear all that crap is when you take equipment to a shop that does more than just audio\video such as performance installation as well. Since those shops do anything custom, they seem to like whatever comes their way.

hehe, you let me know if you have problems at that WC, I work with all regional and district managers in this area as their offices are in the same building. But it better be a big problem, hehe, otherwise, just report it to the working supervisor.

look in this message board , there is a topic about loud songs for SPL. Just about every car audio forum has their own section as well of this topic. If you have a lot of music and want to know exactly where it hits best at, download Audacity. It's freeware. It's helped me out a lot in finding good songs to use for a particular setup.

is your sub wired in parallel? If it is, try wiring it in series and see if it gets louder, those amps like higher loads, just like the highend JBLs. Also gotta realize that you just went from ported to sealed so when you say it isn't loud, it's obvious as to why. Ported is more efficient than sealed.

JoshHD6 - you in the same city i'm in, gotta hear it when you get it all setup. refurb saz-3000d 2 opti2000ds strapped @1ohm 4 refurb opti1400ds you can get all that for under $800

measure the subs with the stereo off, measuring with them on will give you off the wall results. IF you are wondering if you got them wired right, always measure with stereo off. IF you are wondering why resistance is so high when playing something, that's rise.