Quentin Jarrell

Glue job is a little rough. It's raining and didnt feel like walking to the shop to get my turn table but its good enough for a prototype.

It's together. 6 inch dust cap rides on the surround. I'm going to tool a small cap and centering ring to accommodate the driver. Testing will begin soon. If I like it Ill start selling them when I receive all of my parts.

Don't. Use an automotive grade primer. Do NOT use resin.

Yes vacuum will go through MDF. My vacuum form guy uses MDF bucks and he gets vacuum through 4 or 5 sheets thick without drilling holes in it.

encapsulated 75 grams of BB's around the former to get response to a usable curve. With this weigh it'll have a Mmd the same as the 15 model. A ported box for this thing is still gonna be tiny though. got rid of the typical gap between the surround and frame.

Will it work? stay tuned!!!

And these will be amplifing the front signal.

Yea two I wanna say 60's from Korey Himmels "packed rat"

Hoping to have it finished by the end if summer. I'm expecting the front stage to take me 200-300 hrs to complete. The box is just about finished. Gotta figure out what to do about processing. Really wanna run two Rane EQ's but undecided.

Yea they are undergoing with a copper pole cap. They weigh a good 7 lbs

With the midbass off axis I want to limit their upper band with as much as possible.

Went with better drivers.

The Tridents will be in September. This truck would be a good test bed to verify specifications.

these ums here will be going in the doors ported. These ums here will be going in the kick panels on axis ported. And all of them together

Is it legal to swap drivers through out the year? When will finals be held?

All current orders will go out as normal. New orders form here forward will be delayed for about two or so weeks. I am in the process of having all my motors and more than enough parts shipped to my shop so I can minimize lead time. The goal is to get far enough ahead that drivers will ship next day. Please excuse the wait while I make the transition. Also I am working with a local company to come up with a custom package solution so no damages will occur during shipping.

No, I live in south east La. I have a client out there I go to about 10 times a year or so.

I get down to Cameron a few times a year

I agree which is why I didn't post any of myself.

You lost me. Rich? We've been together 13 years Saturday. It's about time.

May 5th

You've need told a lot of stuff. google Ohm's law and then look up the discharge rate of a 9 volt battery.

80 cft of CLD? Good lord. Did no one point you towards SDS? $423 before shipping is enough CLD, ccf, mlv, thinsulate, and ebr to do my whole sedan.