MoeBetta55

I just use google sketch up when designing anything... its free and easy to learn..you'll have to do some math to figuer out the cuft you want/need or the tuning you desier but all in all it will work like a champ.

Do you know what that box is tuned to? the 2.5ft^3 ported one?

im getting a new gcon 12" and just need to build a box for it. i want it ported, specs for the sub are 2.00-2.50cuft @ 28-33hz for ported box and 2.50-3.00 cuft @28- 30hz for ported optimal.... i came across this box diagram for a ssa dcon 12 but im not sure if it would also work for the gcon 12". http://www.soundsolutionsaudio.com/forum/topic/45938-quote-for-225cuft-dcon-enclosure/page__p__726610__fromsearch__1#entry726610 if anyone has any dimensions for one could i bum them from you if not a little insight would help, Thanks.

aww thank you for your response and i will thoroughly haha

I have a Rockford Fosgate punch 501s 1500W amp These are the specs- Bridged Into A 4-Ohm Load: 500 watts x 1 Per Channel Into A 2-Ohm Load: 250 watts x 2 Per Channel Into A 4-Ohm Load: 125 watts x 2 Im really interested in buying a single gcon 12 and was wondering if it would work with this amp and if so does anyone have anysuggestions on how i would wire it up to sound good. here is a link to the Gcon 12" http://store.soundsolutionsaudio.com/products/gcon-12-sound-solutions-audio-12-750w-gcon-series-subwoofer.html let me know what you think Thanks..

ya i was looking at the gcon or the dcon... one of the two.... my max dimensions are Height 21" bottom depth 29" top depth 21" ( due to seat angles) length 40" I have a question about the gcon... can i run it in a single 4 ohm load at 500wrms? or no?

ha ok .. much appriciated.

currently i have a Rockford Fosgate punch 501s amp and i want to find a 12 that will run great with that amp.. my amp specs are Bridged Into A 4-Ohm Load: 500 watts x 1 Per Channel Into A 2-Ohm Load: 250 watts x 2 Per Channel Into A 4-Ohm Load: 125 watts x 2 Any suggestions on a 12" that hits hard and clear?...i was looking at the decon 12" by ssa audio only problem is it only requiers 300wrms 4ohms or the sd-2 series by sundown 500wrms 4ohm but thats for shallower mounting depths and i want something that will slump... im open for any suggestions... i would be up for maybe a 15 if i have room for it. if their are better subs out their for my amp then those let me know don't really have a budget..

haha i hope so... i got a lot of questions but for know im just getting to know the forum.

Im thinking i want a new air of dcon 12s but need some box plans or suggestions on how to build the box for the sub.... i want it to be a fast build cause im and impatient person so if someone has any box plans already for dual 12 dcons in a ported box.. could i bum them from you? if not my room i can work with is Height 21" Depth at bottom 28" Depth at top 20" Length 39" Any suggestion or help is much appropriated Thank.

Hey guys iv been looking around at new subs and I here ssa audio holds it down.. im just surfing around looking at box builds for my pair of dcon 12s i just bought to put in my 2002 ford focus hatchback. Iv seen a lot of videos on these product and i haven't came across any down fall. joined this forum to learn more knowledge on the subject and meet cool people who are interested in same thing i am.. hope to here from some of you down the road.