onebadmonte

SOLD

Is that your new jam. If your looking to go with a full active setup, 2-way or 3-way with a sub this would be the way to go. A laptop is required for tuning. There is a controller available from mosconi that can recall mutiple saved tunes, so you can have a single seat sq tune, and a couple of jam tunes with enhanced bottom end for those rowdy nights.

For sale, Mosconi 6to8. Lightly used, in great cosmetic condition. 8 channels of processing power. Will handle all of your crossover, eq, and time delay needs. Asking $400 shipped.

Looking good.

I would say so, those subs aren't exactly high x-max subs.

If you wanna use your phone or an mp3 player as your source you can use one of these to bump the signal voltage: http://www.crutchfield.com/S-0Ux7fGWtKGQ/p_136CLRLC/JL-Audio-CL-RLC.html?XVINQ=DST&XVVER=CCC Good luck and congrats on getting back on track.

What a bummer. All of my dealings with Sundown have ended on positive notes regardless of the situation. I hope your situation works outs positively. Let us know how it goes.

I would redo the buss bar like this. They way you have it originally pictured, if any of the wires shorted out, the wire would burn before the it could blow all the fuses.

Same here, and as Randal said, "Nice looking Driver."

BOOOOOOM! Looks like a head crusher.

SQ driver, lol.

Thanks for chiming in dudes, I appreciate the complements. I'll throw up some more info as soon as I get a chance.

Gonna be one bad mutha-fhawker with that setup. Congrats.

Howdy all. I've got a little time on my hands and have a couple of widgets at my disposal. I'm running Stevens Audio Full Body horns in my ride and have a few compression drivers to try out. The compression drivers I've collected so far are the Stevens Audio Pro Drive, Dayton Audio D250P-8, and the DIY Sound Group DNA-360. I've head them here and there, but not long enough to decide which are the best for me. I've got one of those Dayton Audio DATS thingies, so I decided to test out my compression drivers and see what the impedance curve looks like with and without the horn body. I figure I'd share them and spur some discussion on how important the impedance curve is regarding sound quality. Lets start off with some measurements of the drivers without the horn. Up first is a compression driver making a strong showing in the home theater scene, the DIY Sound Group DNA-360. Here is the DNA-360 in my scientific testing lab. Up next is Dayton Audio's offering the D250P-8 The Dayton driver going through the ringer. Lastly the Stevens Audio Pro Driver. The Pro Driver being tested. Now lets see the drivers tested with the horn body installed. First up is the DNA-360. This is what it looks like on the horn body. Up close of the DNA-360 driver. Here is the setup in the testing facility. This is what the DATS had to say about the DNA-360 in the Stevens Audio Full size horn body. Up next the Dayton D250P-8 installed on the horn. Here is a close up of the D250P-8. This is the Dayton driver getting tested. Here is what the Dayton D250P-8's impedance curve looks like when installed on the Stevens Audio full size horn body. Lastly the Stevens Audio Pro Driver on the horn body. Up close and personal with the Pro Driver. The Pro Drive getting it's turn through the test rig. The results of the Pro Driver. For shits and giggles here is my Electro Voice DH1A driver on a AutoTech 350Hz Tractrix Horn body going through the test rig. The results of the EV. Here are some side by sides of the D250P-8, DNA-360, and the Pro Driver. Any thoughts?

Congrats on making it around the sun. Hope the next go around is as good as the last.

I dig the Diplo stuff. Hi.

Monkey see monkey do. Even if it's just slinging poop Lol, just made my morning. Ha ha ha. Carry on.

Thats me, on the interweb. Shit gets down for sure. Got me excited to get my Ethos up and banging. Cool vids man, cant wait to see what you come up with next.

Solid! Those are great little subs.

Before you do the ATF flush pull the valve cover and spray carb cleaner down the pushrod hole and let it soak in for a few minutes then do the ATF flush. Good luck.

Lol. No ethos yet. Been suffering through some setbacks in life. Just crawling out of them and getting back on track. Hoping to get something going this month. See you at the show.

You no like my thread? http://www.soundsolutionsaudio.com/forum/topic/62013-usaci-returns-to-san-antonio-tx-4-6-14-whos-down/

Awesome. Hope to see you there.

Brothers Audio 281-513-2528 96 Crossroads - San Antonio - TX - 78201 04/06/14 Starts at 12:00pm SPL+SQ 1X Points Who's going, and what cha bringing

Interesting goodies you got there. Keep up the post, interested in how everything works out.