Fastass09

i happen to have the hcca D5000.1 if you want it call me at 210-373-4856 got it on a trade and would be willing to let it go cheap.

i have a FI Q 10 d2 fully loaded for sale i get it to you for 250 shipped if you are interested let me know and i will send you some pics .

i apologize ill get some pics of the thing when i have a chance and if you want to delete please be my guest

The 9050 was rated at 22 watts x 2 at 4ohms mono 1/2 ohm was closer to 800 watts the baddest cheater amp on the planet by far 9100 was about the same it came in at 1000 watts

send me some pics would be more interested in the 9100 and we can talk on price let me know asap. he is correct they are by far the baddest amps i have ever owed

Listen to him hes a 100% right itis a very compilcated process ive been painting for years and i learn something new every time i can tell you this a truly good paint job is about 90% prep work

Like it says want to buy either or both of these amps had two 9050's running 8 15's way back in the day and want to rebuild that truck so please if you have one or know someone that has one let me know cash in hand .Thank you

Autotek 9100 and the 9050 BTS little ZED audio monsters baddest amp ever made competed in 0-100 watts class with two 9050s with 8 15's back in the day and killed anyone that even dared to try . Sucks wouldn't piss on any of the autotek amps now

Would you do 125.00 aq4 shipped to 78247

You got anything you might want to trade

Let me know its just sitting here i have two of them there are back up just in case my t-2500 has problems .

whats bottom dollar

I have a rockford t-1000 bdcp that will do 1579 watts rms at 1 ohm 14.4 v want 275.00 for let me know .

Shawn this is fastass09 going to order n2 12 from you guys thanks.

i asume you got the money right .

i apologize i just got in from work ill send money as soon as i get a shower .

125.00 shipped

Ok ill try all suggestions and get back with you but im telling you its not even close to the limit but ive been wrong before thanks for all the help that sub is going to end up in my wifes Benz looking for a N2BTL 12 for the car i like it alot louder than the ten will provide but still a bad ass woofer no doubt

pioneer z-140 bh the wiring on the woofer is so basic positive to positive negitive to negitive have not properly set the gain on the amp yet but i did not change anything but the sub i went from two sa-v2 to the one ten and thats where all the trouble began

Fully loaded with hi qts dual 2 ohm coil wired down to one ohm. The head unit is set with sub out at -3 63 hz on the crossover gain is only about a 1/4 of the way up and yes it is 100% sealed

Hey guys i have a FI Q 10 that is run in .5 cu ft sealed its run by a Rockford Fosgate T2500bdcp. Problem is that when you get any kind of power going to it the driver seems to unload starts popping like its has reached the mechanical limit and this is what i would consider to be at a very low volume not sure what to look for to figure this out is there anyone that has had same problem. Please help really want to hear what this thing can do any advice would be apperciated.

how about 300.00 right now.

like it says i have the cash just need the woofer ill give it a few days then ill just order it from fi

I have a t-1000 bdcp if you want one of those

125 mids and crossovers