loudcav

I wouldnt strap them at 1/2 ohm each amp would see 1/4 ohm

ya I believe they have the cavalier listed on their site its too bad they dont make one for the ecotech I had to go with Ohio Gen a couple years back to get a quality one

the Dude sells alot of Mass D garbage thats for sure

http://myworld.ebay.com/robotunderground/ looks like a few other companies might be pissed if they would look into him

*laughs* Yes, if the motor is made @ this size I will call for motor bracing in the instructions. Have also worked out some pretty solid shipping methods for future runs of woofers with a little expert advice. Should be able to get them to customers intact. perhaps wrap the woofer in a trash bag then use some spray foam in the box around it

when the final product hits the streets I bet it dosent look anything like that proto knowing you

honestly I wouldnt be afraid to run them inverted either its a very minor flaw that most would never notice Jacobs just very picky

the amp requires a 300 amp fuse

So say I wanted to run 2 of these really bad but I had 2 dual 1ohm subs meaning I wanted to strap them @ 1ohm daily (music). Could it be done with a 250amp alt, a Deka Intimidator 9A78DT up front, 3-Deka Intimidator 9A31s near the amps and 2 runs of 2/0? Plus with that much current draw...would the 300amp anl support that 392 amp draw ur showing? ya a fuse can allow mo0re than what its rated for then theres the option thats not supported by warrenty of not running a fuse

Im not sure if the mojo amp will take 17.9 volts he may have left it on too long

so when are you gonna trash the bass boost on the rest of the amps?

Just send them an email and dont use the sales one

If those are the APX Clarions, then they are not cheap on the inside. Quality Zeff design used in CV and Arc's I believe. But the Sundowns are a more robust amp for sure, and the power output potential is higher for the Sundown so it is a quality step up. Great choice. he had the DPX ones the cheap ones alot of people bought

well hopefuly on thursday Ill be back to work on the car the truck has to go to the damn dealership I did a bunch of work on it today and its acting up dad and I went over it a few times and just cant get it right he thinks when I cleaned out the throttle body with some carb cleaner I knocked some trash loose and down into a sensor but Im not so sure about that I think its the tranny

bout time you get rid of the cheap Clairions

well looks like the car is on hold for a couple weeks Im getting ready to do quite a bit of mechanical work on my daily driver Silverado its got a bit over 90k miles on it so its time for quite a bit of work time to swap out quite a few original parts I didnt buy any performance parts but it still should get quite a boost in performance

I wish.... I have to go to my nephews b-day party. ya I know Im probably not gonna be out for the rest of the year I offered to let an extreme guy run the one nightshade 18 Ive got here and to use the amps but I guess hes not gonna take me up on that

you gonna go to the 3X and norris' shop today?

3 10 inch sundown SD1s

well keep the remote for the 100.4 since they are the same piece

that is correct on the 1500 and 3k the remote controls the gain and wont allow the knob to take you higher than what the gain on the amp is set to

the wired remote on the 100.4 controlls the bass boost even tho its the same remote as trhe 1500 and 3000D Okay so the remote for the SAZ-1500D is a level control and the remote for the SAX-100.4 is for the bass boost. Is that correct? I just don't get that because the SAZ-1500D has a bass boost as well. ya. who honestly uses the bass boost on the 1500D?

the wired remote on the 100.4 controlls the bass boost even tho its the same remote as trhe 1500 and 3000D

sux, i cant watch this link for some reason Do you have Quicktime? if you do it just takes a wile to load

not to mention you still need room for your batteries amps and all that stuff