R3dt34rz

Failing hard drive

Aaron, Can we get an estimated ship time on these late orders. It's been a 4 month wait as of today.

Yea set to ohms.

Will tell you if both coils are working properly. Go through with the tests of taking a ohms reading and trying the 9v battery on the coils as mentioned. You will know for sure then.

9 volt battery positive/negative to positive/negative on each side of the speaker to see if you get movement with the sub. This would indicate coils are good. I would try the DMM you have, and see what you get. In the future you can always get a better one, like Craftsman, or something similar. Fluke is the king of DMMs. Wal-mart is said to carry a good model DMM also, but I couldn't tell you since mine is from Craftsman.

I heard a sub bottom out and it is a terrible sound to hear. Like a loud "clacking" noise. Break out the DMM and ohm those bad boys out as mentioned earlier. How do you have your SSF set? Were you running full tilt or what? Clipping?

Two runs of 1/0 awg, both pos and ground. Run a D3100 in the rear. Two runs will be plenty and then some in case your system grows and you decide to strap another 3500d

No probz Axe. I checked out your vids man, xcons getting wicked. Good stuff man.

Bigjon mentioned DJ Slow N Throw. You can find download links (copy and paste) here: http://www.djsnt.com/#all

Decaf is good stuff. Most of it is "clean", which has been said early on. I bump it all the time, just because alot of it slams so low. I've never had an issue with clipping, and I sometimes run it near full tilt. Get all 31 zip files and enjoy it.

Dope vids, keep em coming man. They will only get better, at least that's the way I think of it.

My bad guys, didn't know it was a pick up.

Double baffle, subs up / port back.

The new Brz line is already out, my buddy runs a 2400d. I would say try something different like Crescendo BC2k or AQ2200d.

Officially going on 4 months next week.

Accuair makes a kit that will work with your car but it maybe a tad expensive. If the car isn't sitting rediculously low, I would drop the front and put a nice set of wheels. If not ,then air would be the way to go. http://www.autoanything.com/suspension-systems/Toyota/Camry/111A50469A50614A0A17A84A1.aspx Youtube vid

Pioneers are awesome, I have the 9400bh and like it alot. The only reason I'm taking it out is due to upgrading to the AVH P8400 next to my desk. Just waiting on the bypass and I will install here soon.

Sick.

New enclosure or dual Icons/Xcons ported in 7 cubes tuned to 33hz.

A little digging around man, top notch 80prs. http://www.****/forum/head-units-processors-eqs/148162-pioneer-deh-80prs-minty.html http://www.ebay.com/itm/PIONEER-DEH-P9400BH-CD-RECEIVER-BUILT-IN-BLUETOOTH-HD-RADIO-DEHP9400BH-B-/330895579603?pt=Car_Audio_In_Dash_Receivers&hash=item4d0ae9d9d3 http://www.ebay.com/itm/Pioneer-DEH-80PRS-CD-MP3-In-Dash-Receiver-/171012259301?pt=Car_Audio_In_Dash_Receivers&hash=item27d11ffde5

Did you disconnect the subs from the amp and take a ohms reading at the enclosure terminals? You should be seeing 1 ohm reading there, Then pos/neg into the amp afterward. Those subs should be pounding with that 3500.

That setup looks dope. I like how clean the wiring job is.

That is cool. Congrats Axe.

Plus one. Half the battle is the enclosure. Put those things in a nice box and they will shine.

Ship FPO/APO.