Aaron Clinton

the LMT in the OC, hey Im down with OPP, :datsphatyo: but seriously, having the LMT at the west coast meet would be awesome, it could be a first, almost like an invite only premier for a sub, we could use it also as a publicity pull for the Team too, "TeamSSAudio.com meet and LMT debut!", someone get on it STAT!

I personalyl don't think the HiFonics is needed, more than enough power, if I had the loot I would put a SX 900.2 on mine, or maybe a Reference 750, or Orion 8002 all three more than enough power with out risking the integrity of the sub

ok hold the phone, chinny, I know your getting a lot of different responces and ideas, listen to Mike, you don't need that much power on them and to be honest your really not going to hear that much of a difference under normal daily listening levels, unless you enjoy driving around with your roof rippiling, if you want to stay Orion, and woudl prefer to go through HCCAfan, great seller, I have picked up a lot of equipment through him, then look at the Orion 1200D, the 1200D will do close to 1400 watts as long as your feeding it clean power, fairly efficent amp that has great potential if nto look at the KX 1200.1 from kicker, another excellent choice for your possible set up, either way they are going to both provide more than enough power for your needs, when you get up much farther than that (power wise) you really are only going to notice a difference on the meter, Cadence A7HC is also a very capable amp for your application, small footprint too, but anyway I would choose the Orion first, through HCCAfan it is hard to beat for quality power and features, oh yeah a warrenty too

there are some more smilies I can upload, if you guys have any I can put them up on the server, Mike I know you have a ton that are sourced from the SoundSplinter site, if you want I can put them up here to make it easier, to chime in, I asked mike a question yesterday, and within 90 minutes I had recieved a quick reply, RL-p BABY

the few I have been around, move a ton of air, and in a violent manner, I have not heard one in a solid daily install, but for daily I feel the L7 is more than enough, on a side note, recently Grand Master on SD wrote that most of the L7 line was built to be optimized in a sealed enclosure, can anyone confirm that?

I heard he eats is own farts

email me at [email protected] and I'll send you an info sheet with pics. ygm

keep the Alpine

a pair of Atlas 15's for home audio use would be very nice

glad ya found us

that is true, appearance being a factor sometimes, the RL-p wins, not to mention, if you ask him nicely Mike will sign it for ya

its a box warbleed was kind enough to help me design a few years ago, I checked the specs and I can still build it and use my old MTX's in it if I do it right

I have to port the RL-p, but the RL-i 8 could go ported or sealed with great success

any pictures of the Q series amplifers?

You'd probably want to go with about 1cf per driver tuned around 35hz. I'll figure the box up as common chamber. The port is a 2x12 slot, 16 inches long. This occupies about 0.25cf counting the MDF used for one of the port walls (we'll have the port against one side of the box, and between the top and bottom, so only one port wall has to be constructed). So, we're going to want a total of about 2.5cf before woofer and port displacement. Our external dimensions will be 13.5H x 33W x 19.5D. So internally, the dimensions for the woofer are 12H x 28W x 18D. This is because the port and port wall take up 3.5" on one side. On the other side we have the other wall of the box. We're assuming 3/4" MDF. To make the box, you would want the following pieces of wood: TOP and BOTTOM: 33 x 18" (so 2 pieces like this) SIDE 1: (non port side) 12 x 18 (mounted between front and rear baffle) SIDE 2: (port side) 12 x 18.75 (slightly longer because this side will act as other side of port wall, and must be flush with front baffle, but still in front of rear baffle) FRONT: 29.5 x 12 (sits in front of sides and between the top and bottom, port goes next to it) REAR: 33 x 13.5 (Just as high and wide as the box, cannot see any other piece but the rear from the rear view) PORT: 15.25 x 12 (Sits BEHIND the edge of front baffle, so they are flush and to make total length 16")

is there someone that could check it out that has the tools to fix it?

Day:AutoCAD designer/programmer, I draw and shape the pannels for ships and powerplants, using UHMW (plastic in somanywords) night: personal train for Ballys Total Fitness weekends: PR and Merchandise for concerts and sporting events, detail cars for a few customers

Nick if you get the t3's in time, you should maybe come down to the 3x in WV, I forget when it is, and I am not sure if I am going or not

well there is noone near me, unless the VA and NC boys want to drive up, or the NY kids feel like coming down

great pix

what are you asking for on the remaining SX? I can see if anyone might want it

nick what are you buying?

glad its ok now

very nice amp for sure

yeah because you might lose most of your hearing with it running at .5