smullen

Looks Interesting!!! I'll be waiting for updates...

Welp have a good SAFE Happy New Years!!! I'm getting ready (in about an hour) to head next to to a good friends house... Every year for the last 10+ years, about 10-12 of us sometimes a few more have all got together at my friend Tom's crib, everyone brings a little (or a lot) of assorted liquor and foods... I get good'n smashed, then stumble next door and crash in my own bed... BTW, Wearing my Sundown Shirt to the Party!!!!

Sliding glass Window maybe for adjustable tuning.... Plastic bag, Beta testing a new Aperiodic Membrane <SP> type material???? What makes me chuckle about this whole thing is the use of the word retarded... Over the weekend my daughter and I were bickering as it seems her school, friends, the media, or someone other than her mother or I have sensitised her to teh usage of the word "Gay" as it may offend someone of this persuasion.... However, its OK, to say Retarded??? I guess they would not know to be offended... LOL, I'll say either, if the thought pops into mind... I'm an equal oppertunity offender...

+1 You beat me to it....

I've been guilty of this too I guess... I assumed (yes I know what happens when you assume) from reading some posts that when you mix SPL and SQ, you get "&quot;SQL&quot;"...Which is really where I like my systems to be... A Mix of really nice sounding music (that gets really loud) and a sh!t ton of low end to go with it... When I go to a ""High End" Stereo shop be it home or Car Audio and they demo their systems I like where they are going but they just don't seem to have anough bass... When I mention I want more Bass, they say, Sounds like you want an SPL system... Aaarrggghhh!!!!!!! Maybe we should have another official term... I've heard the term ""Street Beats" thrown around abit too... Would this be more accurate??? I say we purpose several new names or terms, vote, ratifiy it, then stamp it... Done... New term Coined!!! No more b!tchin...

NP: Disturbed - Down with the Sickness and a few of their other tracks... I dig this song... I know its oldnews, but I recently stumbled onto it when my 14 year old daughter and I were watching an old movie - Queen of the Damned... Also, opens up some new stuff for me as I normally listen to mostly Rap/Hip-hop, and a bit of R&B, pop and Jazz....

Sweet Flexfits FTW!!!! I'll check out the site.... Love Car Audio Gear... I'd much rahter wear something with a cool Car Audio logo on it than any of the Designer trendy brands...

Yea 6K is a bit more than a splurge for me to at one time... Now piece by piece, I could surly see 6-10K on a home theater... A tad more if you throw in any work to the walls or much furniture... I've been parting together a small but hopefully decent HT over the last few years .. I've got Samsung 42" LCD Samsung DVD Player (waiting on the cost of Blueray discs to drop before I upgrade to BR) Yamaha RX-V3800 Receiver (have not even had the time to hook it up) Sony SRT-D1015 Receiver in use now, till I get the Yamy goin 2 Old Xboxes (networked, upstairs and down) and a WII Sony HiFi VHS (still use it every great once in awhile for some old skool Martial Arts Flicks... Crappy old sckool techniques Front Speakers Polk RTi A3s for Rears Polk CSi A4 Sub is a old Kicker 12" Kicker Comp-4 in a prefabed 1.5 cu box powered by a Parts Express 500 watt plate amp, subs is out of wifes old car... LOL... Would love to upgrade the fronts to Polk RIi A9s and not sure on the sub, maybe something from Elemental Designs.. Either way, it needs an upgrade bad. Also love to rip out teh walls in the basement (atleast a few) do some insulation/sound deadening and get ride of this old ass Panneling that looks like it could be from ""That 70's Show"...

Using the Forums search button: No results found for 'AA'. No results found for 'FI'. I had better luck going to google and searching for Ascendant Audio Mayhem I this link.... http://www.soundsolu...udio-mayhem-18/ Summary It said, (not my words) For those of you who dont know the mayhem is, its the exact same thing as a fully loaded BTL with the new forced heli cool motor design (which I think you can now get on the BTL) It just just seems strange why a company would produce two lines that are "exact same thing"... Seems like a duplication of effort... Can't be easy to market a brand and build a name to get folks to spend money on it... Not a big deal, but it would be cool to get a comment from FI or that sells them... **edit** I don't know why, I've never seen it before, but googling I found a link on here to a Subforum for AA... http://www.soundsolutionsaudio.com/forum/index.php?/forum/64-ascendant-audio/

Goals for 2010 (not real lofty) Small but decent system put in my 2005 Trail Blazer for daily use(already have most, just finishng up some details and getting a few more things) Finish Building my my newest AR-15 to the collection (will be #3 A couple more parts and it'll be ready to test fire) Want to paydown or off my Biggest Credit Card and stop using credit so much... It gets so easy, where you just order ish and before you know it, your 5-10k in the hole I plan to slowly work on aquiring stuff to redo the system in my 2000 Blazer... It will be more for show/fun, a groundpounder maybe? I want it loud as Fock, but still plenty of SQ.... Music, not tones.... Spend more time @ the gym less infront of the PC or TV...

Whats the major diff between a 15" FI BTL and a 15" Ascendant Audio Mayhem? Features and Nitche market.... I mean, I thought I read that the same guys designed and build both.... Both look pretty sweet... I would not mind owning either... Just real quick as I'm at work, was crusing the net on break but the biggest difference I saw besides cosmetics was the Mayhem has Silver 8AWG Push terminals 2500W RMS vs the BTL Did not see anything about the terminals listed on the site for the BTLs 2000w RMA Looking at all the Parameters most of the specs seem pretty close... within a digt or two... I'm sure there are others, but thats all I saw in the time I had.... Just curious as I love to learn about cool products...

Sweet setup, looks really nice....

What'd you use???

To run from my alt to my Sub amps, the guy said I could get away with it, if I put in a special fuse.... I am So just kidding, don't shoot.... Not even ure how I came up with that as I was typing... lol... But, Seriously on the speaker wire, think 12 ga would be decent enough to run from the amp (100.4) to the cross overs to the mid/tweet sets(Polk MM6501s)??? I was getting ready to oder some power wire and I was like, Ohhh, I need some speaker wire too.... Thinking about just buying a spool of 12 ga Stinger from Darvex... I would like to oder it all from one place if I can... If I have any left over, which I'm sure I would, I'll just keep it around for a future install or something... I'd rather have 10+ feet too much than 2 feet to little and I'd rather have home runs, with no splices...

Certainly was different than any other shop that I have been too... This place mostly works on Vetts, Range Rovers, BMWs, Benz, etc... Everything Soldered and HeatShrinked, no Crimps or scotch locks in the place... All wires put in a braided loom type sheathing, no wires visable except as they come out of the amps... They absolutly hate passive Crossovers, really pushed active systems... They sell Zapco, Audisan <SP> and Hertz.. etc... Holy Crap those Hertz sounded good.... Started at about 400. a pair and up too 3K a pair... Tad over my budget... By Far!!! Some of their Zapco and Audison gear, was all programable via USB port... Each of the benches had RTAs and a bunch of other decent testing tools... Shoud have seen the install work these guys do... These guys guys were not installers but artists... They had a dedicated wood shop just for wait for it.............. Wood... and a steel fab shop, with racks of steel stock that they make all their amp rack frames out of, plasma cutters, sheet steel for fabing up brackets, adapters and mounts, each install bay has a set of shelves where all the parts of your vehicle go and all the screws and crap get bagged and tagged... The cleanliness and organization of the work areas was really nice too see... Whole tour took almost an hour, maybe a bit longer... As we were talking about what I was wanting to do, He asked what kind of amps I was planning on using in my sytem and I showed him my Sundowns, Not Impressed he wasn't.... He was like, what kind of Sub, are you running that needs an amp like that??? Must be really inefficient... You could tell these guys really paid attention to detail, to the N-th degree, but no offense to them (not their fault) but I really felt like I was out of my range, by several notches.... I woulda really like to have them put an alarm on my ride, but I just cannot afford their rates... Quote for just an alarm was 800.00

Had to Subscribe to this to watch the fireworks.... For the record, I understood him clearly... Jay-cee, I think you are very helpful or normally try to be, but sometimes you come off like your a bit uptight or maybe wound a bit to tight... Not sure if thats the exact way to put it....

So if I do something like the above, what should the finished product be covered in??? Not sure of the color of my interior, it looks Grey to me, but I read somewhere that it was a Ebony Cashmiere or some ish like that... Again, looks like a shade of Grey to me... Here is a pic of my Hatch area... I think you can click on it for bigger pic... I hate Image Bam.... One of these days I'm just gonna spring for my own domain and someweb space... Anyway, Back to the covering of the box / Amp rack...

Same here... I wore my Sundown Audio T-Shirt today... I got to tell a few people about Sundown.... Some of my Co-workers were like, what the hell is Sundown??? I work for a Cable/Internet Company and they figured the "Audio" was some type of Audio/Video gear till I skooled'em...

Just curious, whats the purpose of going Active, vs passive??? Just because you can? Is there more/Accurate controll? More power to said drivers? Something else I had not thought of....

That is one sexy amp!!!<BR><BR>I'd love to be running a few of those... <BR><BR>***Edit*** I'd love to be running the stuff I got 1st... lol...<BR><BR>But the 4500 looks like stuff dreams are made of....<BR><BR>I just hope people that get one or more of those can power'em...

Forgive my ignorance, as I'm less than a Newb when it comes to figuring out port specs... So when you say make the port length 30-32", you mean the value where I currently have it set to 8 giving me 24.5??? So I change it from 8 to 14 and now I get 30.5??? If so sweet... I try to do some more final measuements in the truck to make sure soon as I get get out there durring daylight... I work alot and travel around St. Louis Missouri and Illinois alot... Never now where I'll be and when...

Ok using RE Box calc I think this will fit, I'll have to measure one more time... But assuming it does... Hows this look for the 15" BTL??? Box Width 32 Box Height 25 Box Top Depth 15 Box Bottom Depth 15 wood thickness .75 Square port Width 3 < ---- This gonna be a big enough area??? Square port length 2 8" Square port area is 70.5 Box vol is 4.592 (sub takes up .21) = 4.382 cu after sub displacement tuned freq is 36.27~ I think I'd like the tuning a tad lower, but will I really be able to tell? This is for music... Rap, Jazz, R&B, Some rock, Alternitive, techno... etc... Thoughts? Or would I be better off stepping back down to the 12" BTL?

I hear that... No Pun inteneded .

Well that settles it... Not using them...

I've asked about Shirts and hats Several times, but I got no love....