95Honda

Sounds just about dead-nuts on to me....

I have no idea what the T/S parameters for that driver are, so I cannot tell you if it is suited for vented or sealed alignments. For H/T ultimate extension I would lean towards a vented alignment, assuming the driver will work well in one. If the driver is much better suited for a sealed alignment, shoot for Qtc between .6-.7. Any lower and it will begin to sound lifeless, any higher and it will have too much ripple and start sounding crappy. Sealed boxes sound no better than properly designed vented. You only need to use polyfill if you cannot build the box big enough for target Qtc, this really never happens in the H/T environment. I would do some research on what EBP is. I would also do some research on the pro's and cons of each design. There is nothing wrong with down-firing alignments, but you have the ability to alter the way the driver behaves when you load it close enough to a solid surface. Normally, it will drop system resonance a tad, but that is about it...

Looks real good. What is it tuned to?

Just so you know, it there is any volume that goes (loads) through any type of "window" or "opening", it will behave like a band-pass.

You need to stop and get help from someone who knows what they are doing before you ruin your equipment.

It isn't good if it makes any sounds other than the music it is supposed to be playing. If you are bottoming it out (clank/clap/popping noise) you are causing permanent damage somewhere, every time. This is caused by improper installation and/or operation.

Red car of some sort, yeah maybe grand am

there is a dude having sex with his car on TLC right now, wtf????

Yes, I place it about 10' from the gun. It has 2 sensors, about 15" apart... The only tricky part is to not put a hole in it...

lol... I have everything packed up and am sending it home Monday. I'll have some decent 10mm ammo to shoot when I get back...

lol, you linked mine... I used to have an Ohler...

yes chronograph. I always use mine when working up a load...

This was with the 170gr sierras last week. It clocked over 1200fps with this load...

11 grains blue dot. 1200 fps on my chrono. 180gr bullet. that is like 575 ft-lbs out of a sub compact... F'n man stopper...

Oh, and that isn't the actual primer box, 10mm takes large, realized that after I took the picture, grabbed the pack out of the garbage... lol...

Roger. 29. The ammo in the blocks hasn't been seated yet...

Just finished loading 185 rounds of 10mm Auto. Finishing up the last few projects before heading overseas...

Oh, in case you haven't figured it out... I hate Afghanistan... I have spent almost 2 years of my life there, lol... Good work, awesome times, but I hate that fucking country...

So as I was getting some stuff in order to hop on a C-17 next week to Afghanistan for a few more months one of the guys I work for comes up to me and tells me "Hey, we are standing up a new XXXX in XXXX country (like $135 a day in extra per-diem!!!) and we need you to engineer/install the complete XXXXX".... So I am like, Fuck yeah, let me get all my shit together, he is like "good we will leave in 48hrs"... Another guy comes up to me 2 hours later, hey, project project moved, have fun at Bagram (Afghanistan)... 100 feet from where I was originally going, lol... Some shit...

New to me!

http://wp.me/p4o2NZ-e awesome. 67 year old man beating up punk.

They used to be at least...

Back in the day, like more than 10 years ago, they were great. I had an Atomic Shocker(?) 15", it was a pretty good sub, but again that was like 10 years ago. I do not know what they have now...

I just picked up a pair of 17 Gen4's for $398 each plus tax... Blue Label Glock prices are freaking awesome...

You're still in SIN mode. The old Atlas were pretty nice pieces. I still have an Avalanche somewhere...